import the stopped device, low storage

Similar Questions

• Could not import the Wildcard on SAA certificate

  Hi all

  I'm trying to implement a GoDaddy Wildcard (*. mydomain.mytld) cert for a number of clubs, among which there is our ASA. I put away the old certs and did some housekeeping on their trustpoints, etc., with the result pretty much own config. (I'm on 8.3).

  I needed to register for the cert in a different area (Exchange 2010) and I exported the cert in cisco-pasteable format REB to make it ready for deployment ahead on the ASA. Here's what I've done (with cry ca debugging on), causing a failure to import the wildcard certificate. Can anyone shed light on what I'm doing wrong? What I was doing was essentially installation TP for root and intermediate and then import the actual device cert.

  The installation program two trustpoints for RootCA and intermediate TP:

  gate0 (config) # crypto ca trustpoint gdroot
  gate0(config-ca-Trustpoint) # Terminal registration
  gate0(config-ca-Trustpoint) # revo no
  ---------

  gate0 (config) # crypto ca trustpoint gdinter
  gate0(config-ca-Trustpoint) # register terminal
  domain name full mydomain.tld gate0(config-ca-Trustpoint) #.

  ----------------

  These authenticate:

  authenticate the cry ca gate0 (config) # gdroot
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-

  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdroot)

  authenticate the cry ca gate0 (config) # gdinter
  Enter the base-64 encoded certificate authority.
  End with the word "quit" on a line by itself
  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  INFO: Certificate has the following attributes:
  Fingerprints: [snip]
  Do you accept this certificate? [Yes/No]: Yes

  Trustpoint "gdinter" is a subordinate certification authority and is a non self-signed certificate.

  Certificate of the CA Trustpoint accepted.

  % Certificate imported successfully
  gate0 (config) # CRYPTO_PKI: Cert record not found, return E_NOT_FOUND
  CRYPTO_PKI: No appropriate trustpoints not found to validate the serial number of certificate: 0301, object name: serialNumber = 07969287, cn = Go Daddy Secure Certification Authority, or =http://certificates.godaddy.com/repository, o is GoDaddy.com------, Inc., l is Scottsdale, st = Arizona, c = US, name of the issuer: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US.

  CRYPTO_PKI: Recording of Cert not found, return E_NOT_FOUND
  View the contents of the current certificate:
  1 certificate:
  SERIES: 0301
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  Certificate 2:
  SERIES: 00
  ISSUER: OU = Go Daddy class 2 Certification Authority, o = Go Daddy Group\, Inc., c = US
  CRYPTO_PKI: crypto_process_ra_certs (trust_point = gdinter)

  Import the "peripheral": wildcard cert

  Crypto ca import gdinter RECs
  ATTENTION: Registration certificate is configured with a complete domain name
  that differs from the fqdn of the system. If this certificate will be
  used for VPN authentication, this can cause connection problems.

  You want to continue with this registration? [Yes/No]: Yes

  % The FQDN in the certificate name will be: mydomain.tld

  Enter the base 64 encoded certificate.
  End with the word "quit" on a line by itself

  -BEGIN CERTIFICATE-
  -CERTIFICATE OF END-
  quit smoking

  ERROR: Cannot analyse or check the imported certificate
  CRYPTO_PKI: cannot define ca cert object (0 x 722)
  CRYPTO_PKI: status = 65535: could not get the key of the cert usage

  You can see a problem due to not have generated the CSR on the SAA (with ASA's private key) because you use a character generic cert.

  There is a here document which explains how to get around that.

• External storage space can be added to stop messages "low disk space"?

  Original title: I'm running vista on laptop attempted to solve by usual means low disk space now got external storage space can I get do this part of the computer comprehensive storage thanks bobster

  I tried to increase my memory on the laptop by buying a box of external mass storage and want to know what can I config portable to take account to stop a low disk space

  Hello

  Unfortunately, it is not possible to add external hard drive on the internal hard drive space. However, you can perform disk cleanup that can help you solve this problem.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  You can also uninstall the unwanted program to increase the space.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• Error, "the program"Importer.exe"stopped" when importing a video.

  Hi all.

  First of all, I'm sorry to bother you with one issue other than Microsoft, but it is a place where Microsoft Support advised me to ask for help. And in fact you are my last hope :)

  The thing is this. I use Pinnacle Studio 15HD (http://www.pinnaclesys.com/) for video editing. And normally, the first thing you can do to start working is importing the video source (be it a camera or any other device that contains media). Suddenly, the Studio began to show a message "the program has stopped"Importer.exe". " Windows is looking for solutions to this problem"(Windows 7 Professional). This message appears when you switch to the Import tab and sometimes just after the loading of the Studio. In any case the Studio stops working and does not at all after that message.

  I already tried the following to resolve the problem:

  -Reboot / restart the operating system

  -Completely reinstall the software (Pinnacle Studio) - twice

  -Graphics card drivers / DVD - ROM (suggested by users of the pinnacle forum)

  -Complete the process of importer.exe and launch again in 'Run' option... » (-/ /-)

  -Unplug all the devices of media before starting the Studio

  No results :(

  If despite that Importer.exe is the a program linked to the Studio, as far as I understand the problem is not inside the Studio. If you have any ideas on what could lead to such a question, I would be very grateful.

  Pinnacle is now a part of Corel Corporation and unfortunately, they argue that the version 16 and higher product :(

  Thank you very much beforehand.

  Tamara & Leonid.

  You can post here as well.

  http://forums.pinnaclesys.com/forums/70/ShowForum.aspx

• Why my iPhone has a capacity lower than my iPad when they have the same amount of storage?

  Why my iPhone has less capacity (storage wise) than my iPad when they both have the same amount of storage?  My pictures takes up to 7.2 GB on my iPhone with only 700 pictures & my iPad takes up to 4.0 GB with more than 1,000?

  Check the settings of your devices to the settings > Photos & camera > iCloud photo library > do you both value library optimized? If NOT, this is your answer. If YES, then the size of the local library is adjusted based how much space you have, if you change or display more than full resolution images on a device, than another, on what device the photos were taken, etc.

• Error: The video device is currently in use... trying to import video

  original title: importing video

  I'm trying to import video from my camcorder. I did this several times in the past with no problems. Now, I get the following message: the video device is currently in use. Close any other program that is using the device and try again.

  I don't have any other programs open. I went to the Device Manager; Imaging devices; and my camcorder is listed and it says that the device is functioning properly. I tried to "import from digital video camera" using Windows Movie Maker and I still get the same message. I tried to disconnect the 1394 cable and turn on/off several times my camera. I still get the same message. I've never had this problem before. I have Windows Vista Home Premium.

  I had the same problem since I started recording on 10 July
  I have DELL Studio 64-bit pc
  Sony DCR TRV350 so I use I394 cable 4 pin-to-6-pin firewire
  While your DVR camera is connected to the PC via firewire, search Windows Update and install the patches to recommend.
  If you have Windows encode uninstall it
  reset
  It worked for me
  It may be useful
  I checked with sony for help. They could not help, but it gave me a clue
  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893

• I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  ===============================
  If a music file Movie Maker crashes
  in a format that is not compatible. If you convert
  the file to the format of .wma before importing, you
  can have a better result.

  The converter below might be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your audio clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to fix my usb ports? Not correctly recognize the iPod and other devices of storage correctly.

  I had problems with getting my iPod classic 6th generation to be recognized by my computer windows 7.  It works very well but all of a sudden stopped working.  When I connect the iPod, it says on the product than its 'connected' and is in charge, but does not appear on "my computer" or on iTunes.  Now, I supposed that it was a problem with my apple product, but after putting in the store and plug both Mac and PCs, this worked fine, its clear that it is actually a problem with my specific PC.
  All software are up to date and I tried stop and start the unit. (Control Panel > administrative tools > services > device mobile apple).  The PC also recognizes the iPod randomly once in a while and I managed to restore the iPod to factory settings to ensure that there is no problem with the device itself.

  As stated earlier that the iPod is not visible in 'my computer', but when "devices and printers", there are two elements relating to the iPod, appearing almost as if it's two separate devices. the first is "apple ipod usb device" on the devices section and "Apple mobile device USB driver" in the section not specified.  When I click the first device it freezes the computer for awhile.
  I tried to move the ipod to different USB ports that make no difference.  However, when I put in a pen memory USB (TDK 4 GB), it initially also put it in unspecified, but with a yellow warning down logo on the left and when I moved my wireless usb key for my keyboard, it didn't work initially.  These two seem to have resolved themselves in Device Manager...

  In my view, there is a problem with my usb ports grateful drivers. Any idea what I need to do?

  Hello

  Thanks to community Microsoft can help you with your concern for Windows!

  You are facing problems with the USB ports on the computer.

  Method 1:

  Run the troubleshooter of material and check what is happening.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

  You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Method 3:

  You can update the driver from chipset from the web site of the manufacturer and then uninstall and reinstall the device driver updated from the web site of the manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem persists, or you need help on Windows please keep us informed.

  We will be happy to help you!

• Cannot import videos using Photo Gallery - "the video device is currently in use"

  original title: impossible to import the videos using Photo Gallery

  Whenever I try to import a video with Photo Gallery, I get the message,

  "Importing video.

  The video device is currently in use.  Close any other program that is using the device and try again.  If you need to start import video, turn off your import device and then turn on again. »

  No other program does use the video device I can say.  I tried to restart my computer, but also a gallery of photos of uninstalling and reinstalling, but I can't seem to do anything other than give me this message.

  I use Windows 7 64-bit.  I'm downloading an older video camera, using a firewire cable.

  Anyone have any ideas?  Thank you!

  Personally I remove sd card from the device and try this way.

  Then click on the Start button and the computer.

  Insert the sd card a sd card reader slot is available, if you need to buy one,

  You can access the SDCard like any hard drive, it is the list, and then select open, do a right click

  Manually, copy and paste the files into a new folder.

  If it's an older device, you can try the factory site and search for win 7 drivers for the camera first.

• Cannot find the 1 TB external storage device

  Recently, when I connected the external storage cable unit (1 TB) portable power source cable and power icon shows not on the bottom right of the task bar.  Oppening desktop computer icon also does not show the external device IE. "removable F drive '.  Is there a way I could locate my external removable storage device.  Thanks Chris

  By any chance, you might try: http://en.kioskea.net/forum/affich-21877-windows-xp-won-t-recognize-wd-ext-hard-drive

  "Could not imagine that connect this unit to a surge protector would cause only not to work." However, it was easy to try. I unplugged from the surge protector plugged into the wall, and he immediately started working. A big thank you to you all. It really worked.

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management

• Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

  Separated from this thread.

  Hello

  I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

  Ewa

  Hi Ewa,

  Thanks for the reply.

  I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

  As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

  Let us know the status.

• Data warehouses do not appear on all of the hosts even though storage devices appear on all hosts

  I have a frustrating problem that I can't solve, my data stores do not appear on all of the hosts even though storage devices appear on all hosts.  Tips on troubleshooting this would be greatly appreciated, it is connected to a Synology NAS iSCSI environment and I use it for my VCAP studies right now, or was

  Tried a lot of things so far...

  -Recreate the target and starting from scratch

  -recreate the cluster from scratch

  -Restart the storage

  -Restart the hosts (I think that I did in all cases)

  
  

  And probably a few other things, would appreciate any other advice/lessons

  Post edited by: a.p. - title shortened to allow for answers

  Please take a look at KB VMware: vSphere management LUNS identified as LUN snapshot to see if that helps.

  André

• I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.  I want to make a collection of web.  I clicked on the tap WEB and then clicked on the button "Import" in the lower left.  All

  I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.

  I want to make a collection of web.  I clicked on the WEB site tab and then click on the button "Import" in the lower left.  All the images changed position.  Anyone know what I did wrong?

  Hi Peter,.

  If some how changed the order sorted, you can go back sorting to 'Added A order' in the toolbar.

  or, choose all the photos and click the view menu and sort to choose the sort order.

  Also, here is the tutorial link to learn more about creating web gallery in Lightroom:

  https://helpx.Adobe.com/Lightroom/help/creating-web-galleries-basic-workflow.html

  Kind regards

  Claes

• Cannot add the NFS storage to the data device

  Hello

  I try to add the NFS storage unit of data.

  I followed the documentation, and when I ran the script supposed to mount/add NFS storage to the device, an error message indicating that the export is read-only, which is actually not the case:

  ./Mount-NFS-Store.pl nfs--servername.domain.com:/hzn-data-01

  NFS: servername.domain.com:/hzn-data-01

  HOST: servername.domain.com

  servername.domain.com is alive.

  Mount.NFS: deadline set for Fri Mar 8 21:33:13 2013

  Mount.NFS: try the options based on the text 'hard, rsize = 32768, wsize = 32768, intr, addr = 128.178.102.59'

  Mount.NFS: prog 100003, try around = 3, prot = 6

  Mount.NFS: try the port TCP XXX.XXX.XXX.XXX prog 100003 3 prot 2049

  Mount.NFS: prog 100005, try around = 3, prot = 17

  Mount.NFS: try XXX.XXX.XXX.XXX prog 100005 3 UDP port 1234 prot

  ServerName.domain.com:/HZN-Data-01 on/opt/zimbra/store10 type nfs (rw, sync, noatime, hard, rsize is 32768, wsize = 32768, intr)

  Error has occurred: directory does not exist or is not writable: / opt/zimbra/store10

  zmvolume failed at ligne./mount-nfs-store.pl 49.

  Of course, I tried to go to the mount point (in this case/opt/zimbra/store10) and quite capable of writing in it (touch, create the file + dir, etc...).

  The data device has root access to the NFS export. I have no idea about the cause of this error.

  Any clue?

  Thank you very much

  Eric

  In my view, that ashish ask you to run the following command, so that the folder is owned by the user «zimbra»

  chown-r zimbra:zimbra