Impossible to activate IORM on OEM, kept getting: resource cannot be assigned to a database

Similar Questions

• Impossible to activate the firewall, error: the firewall settings cannot be displayed due to an unidentified problem. »

  Original title: firewall problem

  Having Windows XP and Microsoft Security Essentials. MSE said to turn on the firewall, but when I go to the control panel and click on the firewall icon, it does not open and I get a message the 'due to a problem unidentified cannot display firewall settings.'  How can I turn on the firewall?

  Hello

  Do you have any other firewall software or security running on the computer?

  Perform the steps mentioned below and check if that helps:

  Step 1:

  Re-configure the firewall, then check the issue.

  a. Click Start, click run, type cmd and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  Rundll32 setupapi, InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf

  c. restart Windows.

  Step 2:

  a. click Start, click run, type cmdand then click OK.

  b. at the command prompt, type the following command and press ENTER:

  Netsh firewall reset

  c. click Start, click run, type firewall. Cpland then press ENTER. In the Windows Firewall dialog box, click on (recommended), and then click OK.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  I hope this helps.

• Impossible to activate the audio service with error message: "cannot start the Audio window Service.Some features will be unavailable.

  Original title: how to get audio in my system that failed for an unknown reason

  Hello... In my audio system does not... If I try to open the "manage audio devices" option in the Control Panel it opens a dialog box with the content next-' this computer cannot play audio because the Windows Audio Service is not enabled. " You want to enable the Windows Audio Service? " for which I clicked 'Yes' ." Then it displays a dialog box that contains the text next-"Could not start the window Audio Service.Some features will be unavailable".
  What is the problem and what should I do now?
  -Thanks in advance

  Hi Thennisha,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?
  2. What is the brand and model of the computer?

  Please follow the steps in the link below and check off the question:

  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Impossible to activate touch id on this ios ipad 10

  Hello

  I have updated my Air 2 day before iPad and from my iPad slow, battery down faster and worst of all I get this warning on the screen, (impossible to activate touch id on ipad) try to reset and add the new fingerprint, but it does not at all. It's the product of 2 years and this bad with the new iOS n slow down in case of failure.

  Apple says it's best iOS, for me the worst until this iOS...

  any idea anyone?

  Hi Cacsh,

  I see that you post today because you are having a problem getting ID of contact set up on your iPad 2 Air. I also see that you encounter some problems related to the slow-running and your battery drains faster that you expect. I would like to help with these issues.

  To solve the problem you're having with Touch ID, I would recommend following the steps listed here:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not type too fast or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Go to settings > Touch ID & password and make sure the Unlock iPhone or iTunes and App Store is on and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  Use the ID Touch on iPhone and iPad - Apple Support

  Regarding the slow performance issue you mentioned. have you noticed what is happening with any specific application? I would like to gain a better understanding of this issue before providing specific recommendations. To answer your concerns about the battery life, take a look at this document for more information on how to monitor your use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To get tips on maximizing the performance of your battery, take at look at this resource:

  Batteries - maximize Performance - Apple

  See you soon.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Microsoft will allow me to return the OEM and get a copy retail or I have to buy the disc at retail?

  I went to the store to buy a copy of Windows 7. When I got home, I realized it was the OEM 64-bit edition. I already opened and installed. I just noticed that I should use the copy that I am not a seller of computer retail. Microsoft will allow me to return the OEM and get a copy retail or I have to buy the disc at retail? I'll be money for theOEM. I guess I should have ask a seller in the store, but they were all occupied. I installed it for someone else while they are mad at me. Can I do a system restore to solve the problem?

  Original title: oem vs retail

  There is nothing wrong with using an OEM copy, its identical to a retail license, just that he has a certain license terms. Considering that the retail licenses are rare and expensive right now, I'd work with OEM license. Microsoft ended sales at retail of Windows 7 in October 2013, while they carry a premium right now.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  I have a license to cs3 Middle Eastern version, the hard drive broke down and had to be replaced and reinstalled. Impossible to activate it maintains a maximum number of licenses Please Help

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the WLAN on Satellite A100 (error message)

  HI - please excuse me if I'm missing some information here, I'm not used to dealing with computers and don't know all the technical terms!

  I use my laptop computer for 4 years and never had any internet connection problems. Use wireless this morning, and by the middle of the afternoon he had "disabled" itself. I tried to activate it (in ConfigFree) but get the message that "the question does not switch '-'Devices '.

  In detail, the three problems proposed are not the cause, none of the items are open. When I run the connectivity ConfigFree doctor, it just tells me again that my wireless connection is turned off.

  I am temporarily able to use another laptop and have tried to install the latest driver, does not. I also did a system restore to last week, but even once, he touched nothing.

  If someone could shed some light on how I can reconnect to the internet it would be much appreciated as I am only able to connect wireless to this place. If I missed any vital information, sorry! As I said, I don't really know what I'm talking about here...

  Thank you

  Hello!

  Have you checked if WLAN is actually enabled on your laptop? You can turn on or off with the switch of material that needs to be defined on and key combination FN + F8. Check this box!

  Also have a look in Device Manager if the wireless network card is installed correctly. In your case, I would also try an update of the WLAN driver.

  If you have any other questions, please let us know! :)

  Good bye

• Impossible to activate my trial version window 2003 Server 360 days

  Impossible to activate my trial version window 2003 Server 360 days

  error: product key is not valid

  You have already posted this somewhere else - no matter where you post the answer will always stay the same - no Windows operating system has a 360-day downloadable trial available.

  FC

  http://answers.Microsoft.com/message/fcabf370-9489-4c8a-AAED-ecb578fd00ca

• I'm went to my PC and tried to go internet, but kept getting error 80072 see 7. Can help you?

  I'm went to my PC and tried to go internet, but kept getting error 80072 see 7.  Can you help?

  80072ee7

  This error code translates ERROR_INTERNET_CANNOT_CONNECT. This could be caused by firewall software blocks the Windows Update Site.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  When you search for available updates on the update site, you see the 0x80072EE7 error
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=22&LN=EN&IsMu=false

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site
  http://support.Microsoft.com/kb/883821
  0x80072EE7 error code

• Impossible to activate the automatic update

  I tried securioty msc and Panel Essensials of Windows, as well as system menu... everything for nothing helped... less than 30 seconds of the automatic update is disabled.

  * Title *.
  Impossible to activate automatic update order to use Microsoft uypdate. Enery time that I manually activate the automatic updates, something disables it keeps me updated successfully in the update of Microsoft

  Mgawat,

  In addition to the information requested, try the fix it tool from the link below and let us know the results of that.  First run it in normal mode and test.  If you still have a problem then run it in aggressive mode.

  Reset the Windows Update components

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.