Impossible to analyze by using HP LaserJet (El Capitan)

Similar Questions

• LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

  Hello

  I use Hp all-in-One Printer Remote android app, Print function works fine but scanning works nor on my phone (4.4 KitKat) or Tablet (jelly bean 4.1).

  analysis function works by using my laptop (Windows 7)

  Help, please.

  Hi @EslamHassan

  Welcome to the Forums of HP's Support. I think that you have a question about the HP all-in-One Printer Remote app.

  The LaserJet M127fw printer is not a printer supported for the HP AiO application. I have included the HP printers and Mobile Printing Solutions support document for reference.

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Google Cloud Print setup - impossible to analyze the capabilities of the printer

  I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for public and private use for eprint settings with no luck.

  Any help would be greatly appreciated.  I tried the reset email with no luck...

  EDIT - 01/04/11:

  I chatted with HP support, and although the representative was extremely courteous, they could not help me.  The support agent assured me that the matter would be taken at a higher level and looked so I hope that we can have a resolution here shortly.

  EDIT - 04/04/11:

  Received a response from the original HP rep that I chatted with online.  In short, it was not able to find a solution and States, that the question will be sent upwards to the highest level of technical support from HP...  We shall see.

  EDIT - 05/25/11:

  After 2 months of waiting, HP has corrected the problem.  Don't forget to upgrade to the latest firmware and check all the settings before continuing.

  The fix came from the side server - this defiinitely had nothing to do with the firmware.  I've updated on Monday for the latest on the HP website and it was still not working.   The gentlemen of tech support that helped me sent me an email a few hours after we talked, saying the sea a fix was to come.

  Nevertheless, I am happy without worrying how the fix is here!

  It took only 2 months to fix, but I'm glad it is.

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• HR 11 cmd line: error: impossible to analyze all project files.  Unexpected error: failed to prepare a single source

  Hello

  I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine.  I just created a new project with a lot of folders/subfolders and a single topic welcome.  This project compiles fine using the RoboHelp interface.  However, when I run RHCL from the command prompt, it refuses to start.

  Here are the details of the order and the results:

  from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML

  c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.

  Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: c:\knowledgecenter\knowledgecenter.xpj

  Layout: WebHelp.

  Output:! SSL!\WebHelp\Index.htm

  Scanning for the compilation project...

  Error: Impossible to analyze all project files.  Please use RoboHelp to recover the project.

  Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.

  I tried deleting the cpd and the project from the hhp file - has not made a difference.

  Help!

  Thanks in advance,

  Claudia

  Thank you.  What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing!  Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly.  It turns out that I have somehow missed tried all FPJs in source control.  Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.

  Kind regards

  Claudia

• How to use the LaserJet 1012 on Windows 7

  Try to use your LaserJet 1012 on your Windows 7 computer?
  

  I've seen a lot of users have difficulties getting their LaserJet 1012 to work on their Windows 7-based computer. I hope that this post helps anyone on this issue.

  1. first click on the start icon, then choose devices and printer

  

  2. choose Add a printer

  

  3. Select the option to install a local printer:

  

  4. choose generic IEEE 1284.4 as the printer port. (If you happen to use a parallel to USB cable, you will need to choose the right port. I'm using the LPT1:

  

  5. choose Windows update at the bottom of the window of the printer driver to install because the HP Laserjet 1015 is not on the list of HP printers. But after the update it is "HP Laserjet 1015:

  

  6. choose HP as the manufacturer and the Laserjet 1015 in the list of printers:

  

  This should help you market well! Need additional information about the use of your Laserjet on Windows 7? Read this article: HP LaserJet, Color LaserJet and AiO/MFP of LaserJet products – install the driver included in the wind...

  Take care

  Sean

  Have a problem similar, but with a different printer? Post a new thread and include all your info so that the community is able to help you.

  Thank you

  Sean

• Use the LaserJet 1000 printer with windows 8

  I tried to use my LaserJet 1000 printer with my recently installed Windows 8. Is this possible?

  Hi JimJohnsonUS,
   
  Thanks for posting on the Microsoft community.

  You get the error message when you connect to the printer?

   
  You can check the compatibility of the printer by following the link below:
   
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us
   
  Click devices tab, in the drop-down list, select Printers and scanners, and then in the search the printer name box type than you are interested in, this will show that the printer is compatible with windows 8 or not.

  As the driver is not compatible, install the drivers Windows 7 in compatibility mode by following the link

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=45675&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=45674

  Run the hardware and devices Troubleshooter

  1. press on the Windows key + X, and then clicking Control Panel.
  2. in the search box, type troubleshooting, and then click Troubleshooting.
  3. under hardware and sound, click on configure a device.

  NOTE: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Hope this will solve the problem, we will be happy to help you further.

• Dreamweaver does not work: impossible to analyze Eve...

  Impossible to analyze the day before: / Applications/Adobe Dreamweaver CS6/Configuration/Dialogs/Eve/CustomMessageDialog.eve

  Any suggestions?    Above is the message I get, and Dreamweaver does not work, just hangs.

  Thank you

  Short of re-installing Dreamweaver, any other suggestion, sorry.

• My old InDesign installed still work or installation CC InDesign disrupt and make it impossible to see and use the old designs?

  Install the new InDesign Creative cloud will make it impossible to continue to use my old InDesign documents?  An old document InDesign is easily converted to document CC?  Cynthia

  Yes, you can open files created with versions more old, but cannot open files created with newer versions using a version earlier than 1.

  for example, you can open files cs3 in cc.  but cs3, 4 and 5 cannot open files created with cc.  CS6 can open a file from cc (but of course no new cs6 feature will be present/work).

• Impossible to analyze the eve: Please help

  Impossible to analyze the day before: / applications/adobe dreamweaver 2014.1/configuration/dialogs/eve/titanoptionaldialog.eve cc

  Help, please

  Hello

  Please, try the following:

  1. Force to leave Dreamweaver so its opening.
  2. Please go to/applications/adobe dreamweaver 2014.1/configuration/dialogs/eve cc location
  3. Take backup of the titanoptionaldialog.eve file and move it to the trash. Remove it from the trash as well.
  4. Restart the DW and check if it works.

  If that don't work then please uninstall and re-install Dreamweaver (also remove preferences) and then check.

  Concerning

  Vivek

• can I use FCP6 with el Capitan

  can I use FCP6 with el Capitan

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

• How to remove my password to start connection using imac OSX EL Capitan 10.11.2

  How to remove my password to start using IMac OSX EL Capitan 10.11.2 connection

  Did you forgot the password?

  Or do you just want the mac connect to your account automatically, without you have to enter the password.

  I'm assuming the latter. If I'm wrong, let me know - there are also solutions for this.

  Log in normally and Access Preferences system-> users and groups. Click on the Options of connection at the bottom left. You may need to click the lock and enter your password to make changes. Change 'AutoConnect' from 'Off' to your account.

• Using Aperture on El Capitan

  Hello

  I'm running old software OS X 10.6.8 on my IMAC and continues to receive reminders to upgrade to El Capitan but hesitate because I don't want to lose access to the opening. (running version 3.2.4). Can someone tell me if you still use Aperture with El Capitan and if not can anyone recommend a similar product (not photoshop). I have photoshop, but many prefer to use Aperture and have thousands of photos in the library. If not is it possible to simply continue to run with OS X 10.6.8 and use Antivirus software?

  Much thanks

  Elaine Morales

  You must update to version 3.6 opening to make sure it works with El Capitan. This is the last version that apple released before the opening was abandoned. I have it on my 10.11.2 without any problem.

  If you no longer want to use Aperture, Adobe Lightroom would be the easiest way. At the time, apple announced that they would stop Aperture, Adobe has put in place an import plugin for Lightroom, to help users with the switch to Aperture. I've never looked into other alternatives. So I can not anymore with this.

  Talk about you still using Mac OS X 10.6.8: If you're happy with it, and if all of your software is running, then my suggestion is "not to change the system." People generally upgrade their operating systems for two reasons. ((1) they want more later and more just for the fun of it - 2) that they want to use programs that require a new operating system.

  You mentioned an Antivirus software. Most Mac users agree that you don't need, because there is no virus for Mac in the wild. Some might even she will slow down or even damage your system, because all these Antivirus solutions are badly programmed. I have never had such software on any of my systems and would never install on any system. But then again, if you are satisfied with how your system works, don't change it.

• Impossible to analyze using Photosmart C4480 all-in-One

  I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.