Impossible to consignment contained in AAU via servlet depolyed on weblogic server

Hi all
I'm working on NetBeans, creating a webapplication that have a page Servlet and jsp. The Servlet as follows: record new document in Oracle UCM 11 g to read required parameters to the jsp page. I run the jsp page and fill in the fields and my servlet is called, check-in document correctlly with the same settings as I read in the jsp page. (the application in NetBeans is executed on the GlassFish server). So far, everything works fine.

When I get a this web application WAR file and deploy it on weblogic server, the application is deployed very well and URL is working and open. But once I have fill the fields and press the submit button in order to call my check Servlet and the document, the document is checked using null parameters; my settings did not see and did not indicate to the fields of the University Complutense of Madrid.

I don't know what the problem is since the same fine application operating on work of GlassFish and operating on weblogic server check-in with parameters null content.

My Servlet Code:

protected void doPost (HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {}

int documentId = checkinContent (request);

request.setAttribute ("documentId", documentId);

RequestDispatcher rd = getServletContext().getRequestDispatcher("/welcome.jsp");
Rd.Forward (request, response);
}

private int checkinContent (HttpServletRequest request) {}

int documentId = 0;
String email = request.getParameter ("xEMail");
String securityAccount = config.getString ("MailListSA");
String triggerFieldName = config.getString ("TriggerField");
String securityGroup = config.getString ("MailListSG");

DataBinder requestBinder = client.createBinder ();
requestBinder.putLocal ("IdcService", "CHECKIN_UNIVERSAL");
requestBinder.putLocal ("dDocType", "MailList");
requestBinder.putLocal (triggerFieldName, "MailList");
requestBinder.putLocal ("dSecurityGroup", securityGroup);
requestBinder.putLocal ("dDocTitle", "mailList");

requestBinder.putLocal ("xEMail", email);

requestBinder.putLocal ("createPrimaryMetaFile", "1");
requestBinder.putLocal ("xCollectionID", config.getString ("TempFolderId"));

If (securityAccount! = null & &! securityAccount.isEmpty ()) {}
requestBinder.putLocal ("dDocAccount", securityAccount);
} else {}
requestBinder.putLocal ("dDocAccount", "");
}

ServiceResponse binderResponse;
try {}
binderResponse = client.sendRequest (context, requestBinder);
requestBinder = binderResponse.getResponseAsBinder ();
documentId = requestBinder.getLocalData () .getInteger ("dID");




} catch (IdcClientException ex) {}
Logger.getLogger (CommentsServlet.class.getName ()) .log (Level.SEVERE, null, ex);
ex.printStackTrace ();
}
return documentId;
}

----------------------------------------------------------------------------------------------------------------------------
My index.jsp Page:

< %@page contentType = "text/html" pageEncoding = "UTF-8" % >
<! DOCTYPE html >
< html >
< head >
< meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 ">"
< title > Page. < /title > JSP
< / head >
< body >
< h1 > Hello World! < / h1 >
< do action = "CommentsServlet" enctype = "multipart/form-data" method = "post" >
< table >
< b >
Title of the Document < td > < table >
< td > < input type = "text" name = "dDocTitle" > < table >
< /tr >
< here >

< b >
Email < td > < table >
< td > < input type = "text" name = 'xEMail' > < table >
< /tr >
< here >

< b >
< td > < input type = "submit" name = "Check-in" > < table >
< /tr >
< /table >
< / make >
< / body >
< / html >

----------------------------------------------------------------------------------------------------------------------------
My web.xml file:

<? XML version = "1.0" encoding = "UTF-8"? >
< web - app version = "3.0" xmlns = "http://java.sun.com/xml/ns/javaee" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd" >

< servlet >
< name servlet - > MailListServlet < / servlet-name >
> the servlet class < com.etech.servlets.MailListServlet < / servlet-class >
< / servlet >

< servlet-mapping >
< name servlet - > MailListServlet < / servlet-name >
<>url-pattern / MailListServlet < / url-pattern >
< / servlet-mapping >
<>session-config
< session-timeout >
30
< / session-timeout >
< / session-config >
< / web - app >

Dear,
The problem is resolved. It's a delicate question.

The type of method in my jsp page was 'post'

*

*

This is what is written in Netbeans and deployed to the Glassfish server.

When a war file created and deployed on weblogic server and the parameters obtained with the value null of the application; the request had the value zero. This is because weblogic seems to read the type of method that is case-sensitive. When I change post everything works fine.

Kind regards.

Tags: Fusion Middleware

Similar Questions

  • How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

    Hello

    I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

    I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

    "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

    Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • Unable to connect to the administration via the regional service console server after 11.1.2.2 installation

    Hi gurus,

    I have installed and configured the services foundation, eas and essbase in windows 2003 server, afteEA r configuration I have observed that there are no tables for eas schema then I found that it was a bug and applied patch and set up again it has been successfully configured.

    When I tried to connect to the administration via the regional service console server. He States unable to connect to the administration server. everything else works.

    I see only 4 services in services.msc

    Oracle hyperion configuration manager

    EMP web server application

    opmn services

    OSH services

    all services are started with the exception of oracle hyperion configuration manager. I tried to start, but it does not start... is - this service has an impact on the administration server.

    I checked the logs, I can't find anything in easserver.log.

    any suggestions?

    Kind regards

    Kumar

    Looks like you have deployed web applications to a single managed server that is running on a port by default of 9000, then try to add the server to the Regional service as servername:9000

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • How to access oimserver via servlet as a stand-alone web application

    Hello..
    I am beginner,
    I want to develop the file custom war that contains jsp and servlets.
    Servlets that communicate with IOM server through the digital signature (by private key) for authentication and the request of the user.
    But I'm not clear how to proceed...

    (1) what are the lib - jar files must be imported for the war file to communicate with the server of the IOM?
    (2) how servlet will be able to communicate which IOM server if I use the method digital signature? go where he will read the IOM server configuration file? (Please provide detail explanations)
    (3) where deploy the war file, application server running IOM server or application server independent separate them?
    (4) if I unfold in the stand-alone application server how to import the digital certificate and how will the communication?
    (5) if I install in IOM server itself how communication will be?

    Please put more light on these areas... that would be really greatfull...



    Thanks in advance...
    Rami

    Here are your answers-

    + 1) what are the lib - jar files must be imported for the war file to communicate with the server of the IOM? +

    What most IOM present libs are in the folder lib console design, the exact number of the libs depends on the api you are using

    + 2) how servlet will be able to connect to which server IOM if I use the method digital signature? go where he will read the IOM server configuration file? (Please provide detail explanations).

    Like any stand-alone client, that client must xlconfig.xml it's read the information on the server of the IOM.

    + 3) where them deploy the war file, application server running IOM server or application server independent separate? +

    You can deploy this file of war anywhere you want.

    + 4) if I unfold in the stand-alone application server how to import the digital certificate and how communication will be? +

    The customer must point to the same server configuration files that points to

    (+ 5) if I install in IOM server itself how communication will be? +

    Communication will be the same if it is installed as a stand-alone client.

    Hope this helps,
    Sagar

  • ASA - upgrade to 8.4, impossible to ping inside the interface via IPSec VPN

    We have configured a site 5, site to site VPN scenario.   Last week, we have upgraded 2 devices ASA 5505 to 8.4.2.   Before the upgrade, our monitoring software would ping the inside interface from remote devices to confirm VPN tunnels were established, as well as the addresses of remote devices and the outside of the ASA.   While we were on 8.2, remote equipment successfully ping the inside interface.   After that we went to 8.4.2 we can do a ping to this interface.   We looked at the newspapers and we see the ICMP traffic that is listed in the newspaper, but the remote equipment does not receive back icmp traffic.   We can ping successfully from local hardware interface inside and the external interface of remote devices successfully.  In addition, we can ping material behind the two devices in both directions successfully.

    We are unable to remotely manage the device through the VPN tunnel

    Net is:

    ASA #1 inside 10.168.107.1 (running ASA 8.2)

    ASA #2 inside 10.168.101.1 (running ASA 8,4)

    Server 1 (behind the ASA #1) 10.168.107.34

    Server 2 (behind the ASA #2) 10.168.101.14

    Can ping server 1 Server 2

    Can ping server 1 to 1 of the SAA

    Can ping server 2-ASA 2

    Can ping server 2 to server 1

    Can ping server 2 ASA 1

    Can ping ASA 2 ASA 1

    can not ping ASA 1 and 2 of the ASA

    can not ping server 1 and 2 of the ASA

    cannot access the ASA 2 https for management interface, nor can the ASDM software

    Here is the config on ASA (attached) 2.

    Any thoughts would be appreciated.

    Hey Joseph,.

    Most likely, you hit this bug:

    CSCtr16184            Details of bug
    To-the-box traffic switches vpn hosts after upgrade to 8.4.2.
    Symptom:
    After the upgrade of the ASA to 8.4.2 all management traffic to employment (including the)
    ICMP/telnet/ssh/ASDM) hosts via the VPN (L2L or remote access VPN) can
    fail the IP access address to the administration. Conditionsof :
    1. the problem occurs if ASA is on 8.4.2. Not been seen on 8.4.1.
    2. the user directly logged in the face of internal interfaces no problem with
    ICMP/telnet/ssh/AMPS in their respective interfaces. Workaround:
    The problem goes back to a Manual NAT statement that straddles the
    address IP-access to the administration. The NAT must have both the
    source areas and destination. Add the keyword "research route" at the end of
    the statement by NAT solves the problem. Ex:
    IP address access to the administration Interface of the ASA is 192.168.1.1. ! Statement by NAT overlapping:
    NAT obj destination - 192.168.1.0 obj - 192.168.1.0 Shared source (indoor, outdoor)
    VPN-vpn-obj static obj! New declaration:
    NAT obj destination - 192.168.1.0 obj - 192.168.1.0 Shared source (indoor, outdoor)
    public static obj - vpn vpn-obj-research route

    http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtr16184

    HTH,

    Raga

  • Java ME 8 b54: impossible to deploy MidLets on RaPi via command line

    Hello!

    I'm trying to deploy a moped to demo on my Raspberry PI for awhile, always running into the same error.

    Everything works fine via Netbeans (RaPi connected in DeviceManager, deployment through 'Run').

    No matter if I try to install directly from the LPR (installMidlet.sh) or remotely (DeveloperAgent, usertest.sh $ ams-install), I always get the same answer:

    PI@raspberrypi ~/jmee-8-0-ea2-b54/bin $./installMidlet.sh /home/pi/midlets/app1.jar

    argv [1] = runMidlet

    argv [2] = + UseProxy

    argv [3] == VMAgentBufferSize4000

    argv [4] = - 1

    argv [5] = com.sun.midp.scriptutil.CommandLineInstaller

    argv [6] = I

    argv [7] = /home/pi/midlets/app1.jar

    [INFO] [CORE] iso = 0:javanotify_start_java_with_arbitrary_args() > >

    [INFO] [CORE] iso = 0:JavaTask() JAVATASK_EVENT_START_ARBITRARY_ARG > >

    [Java begins. Press Ctrl-C to exit

    INFO] [STORAGE] iso = 0:opening for read only/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/ams_params.txt

    [INFO] [CORE] iso = 0:initialize resource limit

    [INFO] ISO [CORE] = 0:RESOURCES [0] midpCheckResourceLimit (3, 1)

    [INFO] [STORAGE] iso = 0:storage_open allocated file_desc 0

    [INFO] [SECURITY] iso = 1:Loading blacklisted clients file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_clients.txt

    [WARNING] [SECURITY] iso = 1: cannot load the blacklist of client file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_clients.txt

    [INFO] [SECURITY] iso = 1:Loading blacklisted apps file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_apps.txt

    [WARNING] [SECURITY] iso = 1: failed to load the application blacklist file/home/pi/jmee-8-0-ai2-b54/bin /... /appdb/blacklist_apps.txt

    [INFO] [SECURITY] iso = 1:BlacklistServer: listening to queue has started

    The following Setup error: null

    java.lang.NullPointerException

    -com/sun/midp/installer/Installer.rebindSuites (), bci = 1

    -com/sun/midp/installer/Installer.installStep6 (), bci = 417

    -com/sun/midp/installer/Installer.performInstall (), bci = 132

    -com/sun/midp/installer/Installer.install (), bci = 65

    -com/sun/midp/scriptutil/CommandLineInstaller.run (), bci = 231

    -java/lang/Thread.run (), bci = 5

    next suite for run 0 null

    [ERROR] ISO [CORE] = detection of 1:Device service failed: java.io.InterruptedIOException: Socket closed

    [ERROR] [AMS] iso = 0:java_input_forwared: no subscribed channel = 8

    I tried several alternatives for the URL of the file (direct, file:// path, http://), still the same error.

    Can someone explain the difference between the behavior of the command line and NetBeans? I tried on Windows and MAC, no difference.

    Anyone who manages to run an installation without NetBeans?

    Thank you very much

    Andi

    Hey Andi,

    Sorry, it's called problem. To make the things work on this binary install you .jad .jar directly not through the file. (i.e.:./installMidlet.sh /home/pi/midlets/app1.jad). Please note that the MIDlet-Jar-URL in the file .jad should point to .jar, such that he's seen raspberry pi (that is, you can use the local path if you use installMidlet.sh or put the .jar file in the local file system and using an absolute path in the MIDlet-Jar-URL when installing the Agent developer console). Also you can use the hostdownload to install-ams command parameter. In this case the MIDlet-Jar-URL must use host paths because the .jar is downloaded by Developer Agent in this case

    The problem is resolved and you should be able to use .jar installation once next developer version published on OTN

    Kind regards

    Andrey

  • Impossible communication with an electronic card via the USB port of the United Nations

    Hello

    I must communicate with a normal electronic card a mini-USB port / USB (serial, COM4). This card transmits on the airwaves on a frequency range that I must address.

    When I plug, the PC detects it and accept it (I installed the driver). Plug-in the HyperTerminal in Windows XP to send instructions in hexadecimal this carte pour what change the range of frequency on which it issues.

    Furthermore, neither MAX nor Agilent Connection Wizard not the detected and none are able to communicate with it, everytime the same message error "no device detected".

    I tried under LabView to send instructions with assistant IIOA, no results. I also tried the instructions 'Config VISA' and 'Entry VISA', trying to write in hexadecimal and normal mode, nothing works. Under labView I have yet no error message, nothing. Nothing.

    I don't understand. I know that it is still possible to drive it under LabWindows, but under LabView (8.5) nothing, not a clue.

    I have the latest version OR-488. 2

    Y ' have a procedure to follow pour such communication of?

    Thanks for any help that would be welcome.

    Kind regards

    Zoe.

    Hello

    The NOR-488 driver. 2 is the driver for the hardware from National Instruments GPIB; If you communicate to the port of of a USB through, this will not impact your code or on the resources used. The only element in common with your VISA application EST enhancement. It provides a unified API pour different types interface with instruments (series, Ethernet, GPIB, VXI, etc...).

    Under MAX, on cannot hole your communication card, only the serial port. The first chose to do is therefore to ensure that the serial port 4 is clearly visible under MAX. You can then the uti Test Pannel VISA pour send and/or receive orders to/from your card.

    If these elements do not allow you to properly configure your hardware, n 'hesitate to send a capture d' screen of the configuration under MAX. If you have a CVI code that allows you to interact with the map, it might be interesting to join, so you can see how interactions with the material are made.

    Kind regards

  • Impossible to find a session created via PL/SQL

    Hi all

    I'm trying to create a new session in my application using PL\SQL:

    declare
    p_app_id apex_applications.application_id%TYPE;
    p_app_user apex_workspace_activity_log.apex_user%TYPE;
    p_app_pass apex_workspace_activity_log.apex_user%TYPE;
    p_app_page_id apex_application_pages.page_id%TYPE DEFAULT 1; 


    l_workspace_id apex_applications.workspace_id%TYPE;
    l_cgivar_name  owa.vc_arr;
    l_cgivar_val   owa.vc_arr;
BEGIN

  p_app_id := 105;
  p_app_user := 'RESTEASY_ADMIN';
  p_app_pass := 'oracle';
  p_app_page_id := 1;


  htp.init; 
   
  l_cgivar_name(1) := 'REQUEST_PROTOCOL';
  l_cgivar_val(1) := 'HTTP';
   
  owa.init_cgi_env( 
    num_params => 1, 
    param_name => l_cgivar_name, 
    param_val => l_cgivar_val ); 
     
  SELECT workspace_id
  INTO l_workspace_id
  FROM apex_applications
  WHERE application_id = p_app_id;

  wwv_flow_api.set_security_group_id(l_workspace_id); 

  apex_application.g_instance := 1; 
  apex_application.g_flow_id := p_app_id; 
  apex_application.g_flow_step_id := p_app_page_id; 
  
  apex_custom_auth.login(
    p_uname => p_app_user,
    p_password => p_app_pass,
    p_session_id => APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID,
    p_app_page => apex_application.g_flow_id||':'||p_app_page_id
  );
    
  dbms_output.put_line('sessionid: '||v('APP_SESSION'));
    
END;

    But when I try to find my session in the session list, it does not exist.

    
SELECT q1.apex_session_id, q1.user_name, q1.session_created, q2.application_id, q2.first_access, q2.last_access, q2.requests
FROM
  (SELECT * FROM APEX_WORKSPACE_SESSIONS WHERE user_name != 'nobody') q1,
  (SELECT apex_session_id, application_id, MAX(view_date) last_access, MIN(view_date) first_access, count(*) requests
      FROM APEX_WORKSPACE_ACTIVITY_LOG
      WHERE apex_user != 'nobody'
      GROUP BY apex_session_id, application_id
  ) q2
WHERE q1.apex_session_id =q2.apex_session_id
ORDER BY 3 DESC

    Kind regards

    Aleksey

    The problem was to find the list of sessions.

    Correct script is

    SELECT * FROM APEX_WORKSPACE_SESSIONS WHERE user_name! = "nobody".

    Everything is ok.

  • PCoIP connections directly on the desktop or via the connection to the server?

    Hello

    I have install a single view connection server and office pool and I can connect to the pool very much using the customer view pointing to the login server.

    I recently added a second login server replica and if I try to connect via the customer view succesfully authenticates, allows me to choose a pool, but errors and then with "the connection to the remote computer has ended."

    Look at newspapers in firewall, can I see traffic blocked from my desktop PC (where the client to view runs) to the IP address of the VM on the port office 4172. Of course, I can open this port, but I do not understand why this should be necessary when using the first server likely traffic goes through the connection to the server, not directly to the customer. The behavior looks different during the passage through the replica, but I don't see why this would be the case?

    You can enable/disable tunneling with a broker for connections setting.  Maybe the second broker (replica) does not make any tunnel and trying instead to go directly through your PC.

  • Impossible to apply the update of security MS15-058 on sql server 2008 R2 SP3

    Hi team,

    Here's my situation: and ask for your help as soon as possible

    ServerName MajorVersion MinorVersion version complete edition
    XXXXX 2008 SP3 Enterprise Edition (64-bit) 10.50.6000.34

    I'm not able to install the update of MS15-058 security on my server and it throws me error below.

    SSMS, it's showing as 10.50.6000, but isn't actually to SP2 (10.50.4000) only of SP3.

    Please tell me the resolution.

    The version of SQL Server's MSSQLSERVER instance does not match the version expected by the update to SQL Server. The installed version of the SQL Server product is 10.52.4000.0, and the expected SQL Server version is 10.53.6000.34. *.

    Only shared feautures are getting updated to MS15-058, which is 10.50.6220.34.

    But the SQL Server database engine and other services are not getting updates and please help us its been 3 days we suffer with him.

    We tried to uninstall SP3, SP2 later none is uninstall properly and seems to service pack SP3 to SQL server 2008R2 in our machine is broken. Kindly help us resolution as soon as possible.

    SLP: VstaRedistWithLangPack_Cpu32_1049 Package ID: NotInstalled
    2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_2052 Package ID: NotInstalled
    2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_3082 Package ID: NotInstalled
    2015-11-06 05:59:24 Slp: VstaRedistWithLangPack_Cpu32_1053 Package ID: NotInstalled
    2015-11-06 05:59:24 Slp: VS_Shell_Cpu32 ID of Package: installation - Version: 9.0.30729
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_Cpu32 ID of Package: installation - Version: 9.0.30731
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1028 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1031 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1033 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1036 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1040 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1041 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1042 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1046 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1049 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_2052 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_3082 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: msreportviewer90sp1_langpack_Cpu32_1053 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_loc_ctp6_Cpu64_1053 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_fulltext_ctp6_Cpu64 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_Cpu64 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: MSI: Package version data are "" Version Installed: MinVersion 10.52.4000.0: 10.0.1400 MaxVersion: 10.50.1599.1 ""
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: match result for MSI - Version: false, Cpu: True, language: true
    2015-11-06 05:59:24 Slp: sql_engine_core_inst_ctp6_AnyInstance_Cpu64 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1028 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1031 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1033 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1036 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1040 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1041 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1042 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1046 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_1049 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_2052 ID of Package: NotInstalled
    2015-11-06 05:59:24 Slp: sql_as_loc_ctp6_Cpu64_3082 ID of Package: NotInstalled

    Thank you

    Vijay

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    Or in SQL Server TechNet Forums.

    https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

    See you soon.

  • Management of the client via GPO USB devices on Server 2003

    I copied the code available in http://support.microsoft.com/default.aspx?scid=kb;en-us;555324 and facilities an .adm file. added the template to the GPO administrative model. Me has "Restrict the player" under "Custom policy setting" under administrative templates. However, could not find anything on the right pane of the GPO while selecting "restrict drives". Pls tell me what needs to be done to make me the options to disable the USB devices on all customers of my company

    Hi Lenka,

    The question you posted would be better suited in the TechNet Forums.

    I would recommend posting your query in the link below.

    Windows Server forums:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Impossible to use Ctrl + Alt + Delete key combination on the Windows Server 2008 operating system

    When you use Windows Server 2008, it does not recognize the function "CTL + ALT + DEL" to open a session; It works very well with Windows 2003 and Linux, but not with Windows 2008. It is connected to OmniView SMB F1DP108A using F1DP101

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the HE public Pro on TechNet. Please post your request in the Forum of networking Windows 2008. It is a forum dedicated to solve problems. Please see the link below.

    Windows IT Pro Forum 2008: http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2networking/threads

    Kind regards.

  • xtpro RELOADED windows. Impossible to update due to the sp1 not accepted by the server computer does not respond. pls help

    Gateway desktop using xp pro. new reinstall and I am unbale to get the updates I am unbale to get service pack, one to load into my computer. report indicates that the server is not responding. Without MS! no update. What I am doing or that is not right. Triad all I can think of.

    Thanks for any assistance

    Tim Lenihan

    Hello

    Have what troubleshooting measures you tried?

    Follow the below mentioned article:

    How to obtain the latest Windows XP service pack:

    http://support.Microsoft.com/kb/322389

  • Fix for "Access denied" via RDP on Windows Terminal Server

    I've seen this fix https://support.microsoft.com/en-us/kb/2779073/ , he described in detail the same problem we know through our servers to Windows Terminal Server running Windows Server 2008 R2 SP1. This patch is for SP2. Is there another fix for SP1?

    Windows Server is covered in TechNet.

  • Can't map network drives via a RDP to Windows Server 2012 connection

    I have yet to find a definite answer on this topic, so I hope that someone will have encountered it here.

    Access us an application on a remote server of 2012 hosted through RDP connections in two different sites.  This application outputs files in a folder that I need mapped to Windows 7 PC local.  After the RDP connection, I go to Windows Explorer and you try to map a network drive using a UNC name, for example: \\IP address\D$ \folder name and check the box "use different credentials.

    At this point, what happens depends on what profile of I use.  If I use the profile that was created when installing Windows Server (admin profile) it works fine.  If I use any other profile, or another admin profile, it does not work, and I can't understand why?

    During the inspection, the two profiles admin seem to be the same!

    I know that I can map drives the other direction (take my drives mapped with me RDP) but this is not acceptable because several PC (on different sites) will be locally run software that needs a path set for the location of the files, that creates the remote app.

    Any advice will be appreciated.

    Try asking in the Windows Server forum:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Maybe you are looking for

  • Can I stop a new tab to open on my home page when I load Firefox to my office?

    When I load Mozilla Firefox my homepage loads OK but a new tab loads also with ' search or enter addresses in the space of the url where an address must be typed. When I click on the information on the general tab Page address for the new tab is chro

  • Satellite A110-293 hangs in hibernation mode

    Toshiba Satellite A110-293 is suspended in the mode hibernate after opening the cover of the laptop. Nothing happens after tapping the keyboard, the mouse clicking or any other activity (i.e. opening DVD - ROM etc..)The cover was closed as usual with

  • Acer Aspire E5 - 521 AMD 1.8 GHz Turbo 2.4 GHz seems slow when it should speed up

    I have updated the laptop to Windows Home 10.  I noticed that the speed of the CPU drops to 1.7 GHz .99GHz whenever applications run.  However, when you are sitting idle, it will accelerate up to almost 2.4 GHz (what?).  I noticed when editing a vide

  • fast user switching

    Don't have fast switching windows user to work and shut down the computer to a different user login

  • MS Office 2007 KB974234 update not install

    Original title: update hangs the computer I recently installed MS Office 2007 on my desktop - all the update have loaded successfully (finally) except KB974234. I downloaded manually several times, but when I turned off the computer to complete the i