Impossible to edit tracks in WMP. Unsaved changes.

Similar Questions

• APEX 4.1 is possible to remove the message "unsaved changes" pagination?

  Hello
  
  We have developed a tabular presentation to APEX 4.1 that only contains an editable column. Once the user changes the column, it triggers a dynamic Action, updated table data source. The problem is after you change a field any and by clicking on the link of the pagination, we get the alert message following "this form contains unsaved changes. Press 'Ok' to continue without saving the changes.
  
  Is it possible to get rid of this message? I found a way to translate the message but nothing to remove it. We have also seen the paging calls a JavaScript function called page, would be possible to modify its definition to disable the message somehow?
  
  Thank you

  Hello

  Apex uses a global array called gTabFormData to store the original values when the page loads and identify those that were changed when the user makes the paging. Thus, a hack that you could use is to call this function right after you have saved the changes in the database:

  function resetFormCachedData() {
      var c = $x_FormItems($x('report_));  // e.g. report_MYSTATICID
      for (var e = 0; e < c.length; e++) {
          if (c[e].name != "X01") {
              gTabFormData[e] = c[e].value
          } else {
              gTabFormData[e] = "0"
          }
      }
  }
  

  I suggest putting this code in a JS library, so if Apex is changed in a later version (for example, by providing a way documented for this), it is easy to change too.

  Luis

• Audio tracks to follow tempo changes

  Hi all

  I'm really confused about something on Garage Band for iOS. Currently using an iPad with iOS 9.3.1 Pro 12.9.

  I started a new project, captured a loop of battery from another application (Anytune Pro in this case) and trimmed the loop so I could loop it and practice on top of it.

  I changed the tempo of the project and audio followed the project tempo change in an "elastic audio" way.

  What is happening now is that I tried to do again, and audio tracks do not follow the tempo change more! I don't know what I did different, I tried to reproduce several ways, but it simply does not work...

  Here is the link for the session, you can open it in your iOS device and change the tempo and you will see that the sequence (salsa one) will match the tempo of the session.

  https://www.dropbox.com/sh/swbfnj24qbuzhmn/AABSGk-zwc1GlMqxlYTMAhQda?DL=0

  If anyone can help me and explain how to make the audio tracks to follow tempo changes, I'll be very grateful! Thank you very much!!

  Hi flaviolira123!

  I can't open your file in Garageband (latest Version).

  But I think that you can only use Apple Loops loops to automatically match the tempo.

  I tried to loop an imported audio clip (import song, trimm)- but I do not have to be matching of tempo.

  I imported a DM1 via Interapp drum - but if I change the tempo of the project, my pace is in the old tempo...

  Have you found a solution?

• XControl size custom on a façade leads to permanent unsaved changes

  Hello

  I have an XControl of mine where I handle the "pane resize" event to organize its façade according to the size of different control.

  When I put on a façade and change its size, VI of the PS obtains changes unregistered whenever I open it, which is a little disturbing.  When I look at the dialog box "List of unsaved changes" he said "the display format of FP objects has changed.

  I tried several 'current Make default values', but without success.

  What can I do to remove this behavior?

  Make the event of front active only for the run mode solved my problem

• Cisco Secure ACS appliance - impossible to edit... Reason: The host no longer exists.

  Hi team,

  I have 2 camera which I am not able to remove a group of network devices home device.

  When I try to remove the device after error is thrown

  Impossible to edit INMUM-VPE-T1-3rdFloor-3750-S...  Reason: The host no longer exists.

  Running on Version: Cisco Secure ACS4.2.0.124

  One would come in all of these issues. someone knows the solution.

  Concerning

  Vineeth

  Hi Vineeth

  Yes, you can do through GUI.

  The GUI:

  1 ACS gui > network configuration > click on 'Search', then click 'Search' again.

  2. complete list of all network devices. On top, you will see an option "Download".

  Download the complete file.

  Let me know if it helps.

  Thank you

  Nelson Saha

• JQuery MoveColumns causes "this form contains unsaved changes" during the previous/press

  I have a page Apex tabular 4.1 loading it moves the columns via jQuery following Script:

  jQuery.moveColumns = function)

  {

  var tbl is jQuery ('table.report - standard');.

  var colChanges = apex.item("ColumnOrder).getValue (); Contains the movements to make columns in the correct order

  var colChangesArray = colChanges.split('^');

  If (colChanges.trim () .length > 0)

  {

  for (var i = 0; i < colChangesArray.length; i ++)

  {

  moving var = colChangesArray [i].split(':');

  Query.moveColumn (tbl, move [0], moves [1], 'AFTER');

  }

  }

  }

  If the user presses the next/previous button to get to the next/previous line set, they will receive the message "this form contains unsaved changes." You can click on the submit button and there is no updated\inserted lines. If I comment out the call to the moveColumns the next/previous buttons work without warning to the user.

  It seems so move columns autour put an internal indicator reflection there are changes. Is there a way in my jQuery script after finishing move the columns autour, I can reset indicator (whatever that is) if the user is not prompted with the warning of unsaved changes?

  I found this ad where they have been reset to the elements on the page:APEX 4.1 is possible to remove the message "unsaved changes" pagination? and once I added this function up to the end of my function moving columns around it has solved the problem. Now either he gives me the message the unsaved changes when I page. It will give me the message if there are unsaved changes when I'm trying to paginate so all is well!

• The unsaved changes in queue: [File name] save before closing?

  Hello!

  FM 9 on Win 7 Pro.

  I'm a long-time user of FM.

  I am trying to open the files I could successfully open before I left work yesterday. I can open FM and open the books of FM. When I try to open an FM in a book, or an FM file not in a book, I get this message:

  "The unsaved changes in queue: [File name] save before closing? No Yes No Cancel.

  It doesn't matter which choose (Yes, no, cancel), following FM shows this message:

  FrameMaker 9 Application has stopped working. Windows can check online for a solution to the problem.

  Search online for a solution and close the program

  Close the program.

  Details of problem

  It doesn't matter what file I try to open (recently worked on the files and I have not touched it since some time). Same messages, anything.

  I tried to update the book (the update seems to happen), save the changes and then try to open. Same error messages. I had hoped that updating the book would clearly any possible referral.

  I tried several reboots, nothing works.

  Help!

  Thanks in advance for any help!

  Terri

  Since his happens with all files, my suspicion is that your application data are damaged. Try this:

  1. close FrameMaker.
  2. Delete the following directory: C:\Users\[user]\AppData\Roaming\Adobe\FrameMaker\
  3. reopening of framemaker and see if the problem is reproducible.

• FM8: File always opens the unsaved changes

  Hello

  I have a file in Framemaker 8 that always opens with "unsaved changes".  I save the file, the asterisk disappears, but the next time I open the file in the asterisk is.

  
  I thought that this could be a problem of 'lack of police' and, as a test, off Remember lack of fonts. This setting does not seem to the impact of this behavior.

  Any help much appreciated.

  Mary

  He has probably got in it cross-references which are auto-mis to date when you open the document - it is this that fools the indicator "unsaved changes".

• FDK problem: "Unsaved changes in file" dialogue with MIF

  Hello

  I have a problem with saving the MIF files using our client API of FrameMaker.

  After that we wrote to all our content, we are asked to save unsaved changes in the. MIF file.

  We do not know whether to click Yes or no.

  If you click Yes, so we get a backup dialog box that prompts you for a file name.

  the extension default filename, value, but a. FM.

  When you click 'save', another message appears telling me that I am trying to record a

  . MIF file in the. FM format and that is not allowed and asks if I want to save it

  as. MIF.

  Although it is a simple annoyance for me, it's very confusing for probably

  Visitors who use our software, and I'm not sure what is the cause.

  I tried to solve it by changing the default save the settings within the FAPI

  by using this:

  F_PropValsT saveParams = F_ApiGetSaveDefaultParams();

  I = F_ApiGetPropIndex (& saveParams, FS_ModDateChanged);

  saveParams.val [i].propVal.u.ival = FV_DoOK;

  Needless to say, it did not work. I wonder you is another approach I should

  use?

  Thank you

  Eric

  Hi Eric,.

  I don't understand if your software automatically saves the file, or if the user needs to do it after your process runs. And, I did not really understand what exactly you want to happen after your code runs.

  I think that all open MIF file (even if in a binary format, after opening in FM) will cause this prompt when you try to close it manually, even if you have made any changes since the last save. My thought is that FM simply looks at the file extension and generates this behavior accordingly.

  A few options you have (May) be more, once I better understand the situation:

  -Leave the code close the file itself, once it is done, using F_ApiClose (docId, FF_CLOSE_MODIFIED). This, of course, if the interactive user does not need to see.

  -Use F_ApiNotification() and F_ApiNotify to divert registration request and save the MIF file automatically, which should allow you to avoid the second prompt.

  -Use notifications to divert the process closing document itself, close doc on request if it changes or not. Or, perhaps, you can add your own messages. This would take account of whether you actually want to allow an interactive user to make changes after that the code runs.

  Just a few ideas. If you provide more information on what you want to happen after the execution of your code (it's probably the translation thing), I might be able to help more.

  Russ

• FRM-40208: train running in query mode only. Impossible to edit database fields.

  HelloW everyone
  
  I get the following error
  FRM-40208: train running in query mode only. Impossible to edit database fields.
  I have not any trigger on this form.
  Database 11g Release1
  form 10 Release 2.
  How to solve the problem of abve?

  Hello

  Check the URL parameters and see if you have query_only parameter with the value 'Yes' (http://.../forms/frmservlet?...&query_only=yes). Try to run the form by deleting (or the definition of query_only = no).

  If you are running from form designer, you can just uncheck this option in Edit-> preferences-> tab Runtime.

  Arun-

• Photos app does not save the changes, impossible to edit photos without using other applications

  'Photos' of photo editing features does not work because it is impossible to save the changes. Photos can be edited as usual, but trying to save the changes that the photo is reinstated to the State of origin regardless of changes. There is no error message, to solve the problem, I tried to reset all settings, but it did not help.

  I have iOS 9.2.1 on an iPhone 6 s.

  Thanks in advance for your advice

  I have the same question since getting my iPhone 6. Very frustrating. Several times the photo says even "revert to original" even though the changes have been never applied, as if he thinks he has saved the changes. I asked for help with an apple store and they had never seen before and had no suggestions.

• 2 second pause between tracks in WMP

  How to change the default pause of 2 seconds between tracks in windows media player, when I burn a cd?  I want to burn copies of my group's live shows, but I don't want the noise of the crowd interrupted when securities change.

  Hi jason.sloan,.

  Thanks for posting answers.microsoft.com

  In response to your question, I'll move this to the Group of sounds and multimedia.  It is in relation to WMP so I this redirects to this community forum to have more responses from the community and MVP who review these groups of the forum.

  Just to give you an overview, WMP has 2 second gap between songs indicating the change of track.  If this delay wasn't the jump track would lead you at the end of the recording.

  There is a way to edit this shift, however, it is usually something that is sought in order to maintain differences in song and be able to distinguish between the pieces of music.

  Please let us know if information is required or if it helps to solve this problem.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• It is impossible to edit a RAW file in Photoshop?

  I needed to edit an image using the tool clone in Photoshop and opens the file RAW from Lightroom to Photoshop to make the change. When I saved the image it registered as 'filename - Edit.tif' next to the RAW file. I added this image to my catalog so I could keep track of it.

  I wanted to really do was make the change to the RAW file and record by overwriting the old file RAW.

  I think that maybe it's not possible.

  Could you be there someone here tell me why the RAW file could not be modified in Photoshop. Is to ensure that the RAW file will remain original, with only changes that appear in the file of .xmp sidecar? It's beautiful and good, but just dream to ensure that it is the only way that this is possible and that the changes in Photoshop will give a new separate file to save.

  Thank you

  Ken

  I wanted to really do was make the change to the RAW file and record by overwriting the old file RAW.

  It is indeed as you found impossible.

  Could you be there someone here tell me why the RAW file could not be modified in Photoshop.

  The reason is that the RAW file is a file mosaicked with data from sensor directly to each pixel. Two of the four pixels usually have a Green filter, while 1 out of four have a red and another 1 to 4 a green pixel. The data is usually stored with 12 or 14 bits of precision for each pixel. All this is inherently incompatible with the model of pixel in a program like Photoshop. To change these files in Photoshop, you have to Demosaic three-channel RGB data complete, making them in some color space, gamma correct them, sharpness, etc. That's what ACR and Lightroom for you. If you cannot change the underlying data using Photoshop. If edit you in Photoshop, you will always create a new file.

  PS you may have noticed that edit in Photoshop creates a much larger than the original RAW format tif file. It is because of the patchwork of Bayer. You have a 12 megapixel. When shooting RAW 12 bit, this will result in a 18 MB uncompressed dataset (12MP * 12-bit /(8bits/byte) = 18 MB). Saved compressed losslesly and including a jpeg preview that gets you about 12 MB of a typical RAW file of this camera. When you return this to a 16-bit tiff file, you suddenly a full 3 x 16 = 48 bits per pixel! If this translates into a 72 MB uncompressed tiff file which probably compress to about 50% of that. More than 3 times larger than the original RAW format!

• Film Windows maker-impossible to edit clip

  Director of Windows (edit a clip)

  I try to use windows movie maker... but there is a clip that I can't change.  Whenever this clip comes up it shows the name of the person in the photo and I do not know how to take off... need quick help thank you

  I try to use windows movie maker... but there is a clip that I can't change.  Whenever this clip comes up it shows the name of the person in the photo and I do not know how to take off... need quick help thank you

  ======================================
  If the text is on the original photo... it will have to be changed
  before you import it into Movie Maker.

  If it's a title that you have added to the photo in Movie Maker... come on in...
  Display chronological and made a click right/remove the title in the title
  Overlay track.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Batch edition do not apply any changes, what happens?

  I have a problem for years, but only decided to ask for help now.

  Usually I would import all my photos (smart preview convert) then...

  (1) select all (usually from 500 to 1500 images)

  2) press AUTO adjustment

  (3) and then adjust the exposure 0

  4) wait for the settings to be applied

  I do this because usually everything works fine except except automatic exposure, I want to take care of that myself.

  I find that not every image will show set to 0, there will be lots where exposure is not resetting.

  The same goes for any other adjustment of the lot, I can select all and change say points, contrast, black or white, but the changes

  not apply to all images.

  What I am doing wrong?

  Hi rueyloonRufus,

  It is hard to say based on your description exactly what might happen. However, I can offer some tips to help just shoot and maybe to get to the bottom of this. (According to me), I would like to start with the premise that you not actually select all images in the folder (for various reasons).

  1 make sure you are in a view of the folders (under 'files' in the left pane) and none is not a 'previous import' or 'Collections '.

  2. open the film and watch the status message to see how many pictures is selected.

  3. make sure to develop all the batteries. Here in this screenshot, you can see the shows of the film ' 82 109 / 82 selected ' once I pressed on "Edit > select all.» This is because I have collapsed of batteries, and pictures in a reduced battery are not selected. Use ' photo > stacking > expand all stacks.»

  

  Try these steps and see if you can reproduce this problem or track. In particular, the status of the film strip line should give you some clues. Let me know what you find.

  Mike