Impossible to establish a wireless connection on the Satellite

Similar Questions

• Impossible to establish a TLS connection to the POP3 server

  I tried to reset my server outbound STARTTLS as suggested in one of your help pages so I can send on behalf of my 3 accounts with the appropriate server outgoing SMPT

  But now I can't retrieve messages and even when I put back to its initial position, I still get no emails.

  The impression that I totally stuffed up, but none of your suggestions of help pages seem to solve my dilemma.

  Would appreciate some advice on how to get out of here.

  Thank you
  Frank

  So why you have your gmail settings on any SSL/TLS smtp server?

  GMAIl server settings page.
  http://email.about.com/od/accessinggmail/f/Gmail_SMTP_Settings.htm

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• Wireless connection to the network home

  I recently bought a Tecra8200 with free Wi - Fi. I have a XPprof Windows installed on it. When trying to connect to my home network with wireless lan functionality, I am not able to connect to my router Sitecom WL-025. (cables) In exceptional cases, the system does not recognize the wireless network. In two cases only have been recognized my Sitecom and the Belkin to my neighbor. I've only had the SSID for routers. No connection. What settings should I enter to make this thing work with the version of wireless network card?

  Hello

  You can check the router if a MAC address verifivcation is enabled? You have any other PC with wireless connection to the router and look in these wireless settings?

  Goodbye, Meier

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• 5520 HP usb and a wireless connection at the same time

  I have set up my new 5520 HP with USB connected to my desktop (Vista) for maximum reliability and can print via printer share from my laptop (XP), but I'm obviously missing out on HP web services.  Can I have the USB connection or wireless connection at the same time?

  Hello f1charlie,

  Its new r: YES, because it would be 2 printer icons. One for the USB and the other for the wireless.

  The icon of the printer wireless would be similar to Hp 5520 (network).

  You can set these printer (USB or network) icon to by default.

  But again, every time that you want to print using any application. Click file > print, which will display a dialog box, where, in, you can select the printer icon.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Failure of wireless connection to the router to the desktop

  I use Windows 7 and a router/modem method. The wireless connection to the internet recently stopped working in my HP Pavilion desktop computer. He still works for my tablet, but I can only connect to my desktop by Ethernet cable. It would seem that the fault lies in my office. The icon in the bottom right of the screen shows the wireless internet available as internet access card. I can't find any disabled dialog box display the Wi - Fi connection and troubleshooting shows no defects with network cards. Does anyone have any suggestions?

  If I understand you correctly, when you click the icon in the system Notification area, you can see a list of the available connections, including the SSID of your wireless network.

  If this interpretation is correct

  • Unplug the Ethernet cable
  • open network and sharing Center
  • Click on the link 'manage wireless network '.
  • Select your network
  • Click 'delete '.
  • Now close the window manage wireless networks
  • Click on the network icon, select your network
  • Click on connect
  • Enter the security password when prompted.

• WLan connected to the Satellite U400 PSU40C but no data flow

  Hey guys,.

  Hope you can help me with a problem I have with the wireless to my new laptop. I bought a Toshiba U400 PSU40C-08U01C.

  It came pre-installed with Windows Vista. Everything worked fine out of the box, wireless/Wired internet.
  I really didn't want to run Vista, so I formatted the hard drive and installed a new installation of patches to update w / all WinXP to SP2 (haven't tried the SP3).
  I managed to install most of the material on the laptop, all drivers worked well.

  Wired connection worked flawlessly - Marvell Yukon network card.
  However, I came across a problem with wireless connectivity. The map has proved to be an Atheros AR9281-AL1E (discovered that by running Everest Home, held a diagnosis on the machine).

  I found no drivers on Toshiba Canada site, since they are all INTEL drivers and do not work to install the drivers for the network card. I was able to google and get drivers for model AR9281 wireless. After installing, everything seemed to be good.

  The WLAN had no problem installing with this driver, I used windows to manage the wireless. I connected to my network w/WPA wireless security. He got a good IP and default gateway appropriate... but NONE GIVEN don't FLOW! Couldn't BACK out ping, was not able to surf. Could not access the home network, could not connect to the router. I know that's not the router, since I went back to cable on the laptop - worked well. Also the without wire is good, because I have two other laptops running smoothly.
  He was also a clean install so no security except for windows firewall software that has been disabled.

  Someone at - it had a problem similar to this? I will return to the Vista installation with the recovery disk and see if I can somehow find out what drivers he used to install the WLAN network card. If I can't get this to work, I can also install Ubuntu and try installing the WLAN network card it and see if I have some luck. Hoping someone can offer other things I could try.

  Thanks in advance.

  Hello

  It's really a good idea to install the recovery image again to see if the wireless card is working properly. Please post the result.

• Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

  Hei guys,.

  Please help me on this one because I'm stuck enough on her...

  I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

  This is an extract from the log:

  130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
  Peer supports XAUTH
  131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified
  132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.
  133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 904)
  134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

  I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

  My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
  -2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

  Behind the second router there is a virtual XP machine on which I have installed VPN client...

  My connection entry in the customer is to have the following parameters:
  Host: 200.100.50.173 , //which is the IP address of the VPNServer
  Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

  I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

  Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

  and the VPNServer router logs the following error message when you try to establish the connection:

  * 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  * 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  

  You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

  Thank you

  Iulia

  Depending on the configuration of the router, the group name is grup1 and the password is baby.

  You also lack the ipsec processing game that you would need to apply to the dynamic map.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

  Hope that helps.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• Satellite L50 - B - I'm not able to establish a wireless connection

  Hello

  No reason, I'm not able to use my wifi connection more.
  I was at home and my wifi worked, but when I went to an another location al of a sudden switch to activate the wifi (8.1 to Windows, not on my laptop, there is no switch on the laptop itself) would not work. When I put a cable internet in my laptop, I have a connection. It's just the wireless that does not work.

  I have tried just about everything I could think of:
  -Installed the new driver on the Toshiba site
  -New Instalend pilot on the Intell website
  -Remove programs of network connection, rebooted the computer, so it would automatically find the right driver.

  Not it worked. I'm not keen to restart my computer because it does more harm than good. Does anyone have suggestions on what to do next?

  It is not the first time, the functions are without any clear reason disabled. First it was my USB-portals. After two months, I got it working again. But now, it's the wireless internet. Its drving me crazy, because I have the laptop for 4 months now.

  Advice, anyone?

  (Toshiba Satellite L50-B-188, wireless Internet by: Intel Corporation;) Intel (r) Dual Band Wireless-AC 3160, version 17.13.11.5)

  Hello Rosie

  On this virtual path, it is not easy to say what the problem is here. The first WLAN card must be properly installed and listed in Device Manager. Can you please confirm this?

  Second, the wireless network card must be properly activated. Flight mode must be OFF and wireless ON.
  Please check in the PC settings > network > connections and flight mode.

  When you check this and WLAN ENABLED scan please area. Your network is visible for your laptop?

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Tecra A8: Could not establish a wireless connection with encriptación WEP KEY

  Hello.

  I just got a new TECRA A8-143, and I am unable to connect to a 3COM Wireless ADSL Modem when the encriptación WEP key in active. The encriptación turns off as soon as I am connected to the internet, any suggestions!

  Thank you

  My first suggestion is you typed and was using an incorrect encryption key!
  Did you check these settings?

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull