Impossible to get a d * mn div to correctly position

Similar Questions

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Impossible to get anything Ive photoshopped with 14 elements Adobe to shoot and print at Wal-Mart kiosk

  Impossible to get anything I photo shopped with Adobe Elements at a Wal-Mart / Walgreens. Never had a problem with the photos, saving and printing with Corel Photshop

  File > save under of the editor and use the drop-down list to change the file type.

  

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

  My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

  I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

  A simple fix Terminal can take care of that.

  Open Terminal (you can just tap Terminal in Spotlight to find it).

  Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

  Press enter, give your password if requested, and then try again. You may need to restart your Mac.

  Gene

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• Impossible to get Min, Max and median of the values in the date range values

  Hello
  
  I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»
  
  With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.
  
  In the light of the median value on these values.
  
  Thanks in advance.
  
  
  
  Requirement is as below:
  State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
  AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
  AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750
  
  
  * "QUERY ' * '"
  
  WITH t AS
  (SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 67 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 78 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'AL' State, 4 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 12 DUAL FROM VALUE
  UNION ALL
  SELECT 'AL' State, 15 VALUE FROM DUAL
  UNION ALL
  SELECT "AZ" State, FROM DUAL VALUE 6
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT "AZ" State, 123 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 120 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 456 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 11 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 24 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 34 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 87 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 23 FROM DUAL VALUE
  UNION ALL
  SELECT 'MY' State, 234 DUAL FROM VALUE
  UNION ALL
  SELECT 'MY' State, 789 FROM DUAL VALUE
  UNION ALL
  SELECT "HD" State, VALUE FROM DUAL 54321).
  -End of test data
  AS T1
  (SELECT State,
  NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
  NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
  NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
  NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
  NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
  NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
  NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
  NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
  NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
  NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
  NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
  (SELECT STATE,
  CASE
  WHAT VALUE < 100 THEN 0
  WHAT A VALUE BETWEEN 100 AND 199 THEN 1
  WHAT VALUE BETWEEN 200 AND 299, THEN 2
  WHAT VALUE BETWEEN 300 AND 399 THEN 3
  WHAT VALUE BETWEEN 400 AND 499 THEN 4
  WHAT VALUE BETWEEN 500 AND 599 5 THEN
  WHAT VALUE BETWEEN 600 AND 699 6 THEN
  WHAT VALUE BETWEEN 700 AND 799 THEN 7
  WHAT VALUE BETWEEN 800 AND 899 8 THEN
  WHAT VALUE FROM 900 TO 999 9 THEN
  WHAT VALUE > = 10 THEN 1000
  END
  VALUE
  T)
  GROUP BY State)
  SELECTION STATE,
  "< 100."
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  "> = 1000."
  '< 100 '.
  + "100-199.
  + "200-299.
  + '300-399.
  + '400-499.
  + "500-599.
  + '600-699.
  + "700-799.
  + "800-899.
  + '900-999 ".
  + ' > = 1000.
  in total,.
  less ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') min_val,.
  largest ("< 100",)
  "100-199.
  "200 299",
  "300-399.
  "400-499.
  '500-599,'
  "600-699.
  "700-799.
  "800-899.
  "900-999."
  ("> = 1000 ') max_val
  FROM t1
  /

  Why not keep it simple?

  WITH t AS
  (SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 67 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 78 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 4 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 12 VALUE FROM DUAL
  UNION ALL
  SELECT 'AL' state, 15 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 6 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'AZ' state, 123 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 120 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 456 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 11 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 24 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 34 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 87 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 23 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 234 VALUE FROM DUAL
  UNION ALL
  SELECT 'MA' state, 789 VALUE FROM DUAL
  UNION ALL
  SELECT 'MH' state, 54321 VALUE FROM DUAL)
  SELECT state
       , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
       , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
       , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
       , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
       , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
       , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
       , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
       , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
       , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
       , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
       , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
       , count( value ) "total"
       , min( VALUE ) "min"
       , max( VALUE ) "max"
       , avg( VALUE ) "avg"
       , median( value ) "median"
  from t
  group by state
  

• Impossible to get a substring of the current s URL page

  Hello
  
  I have a very strange problem with the URL returned by GSF. I seem to be impossible to get a substring of the URL - the String.substring (int, int) method does not appear to return the expected results. It seems that other methods of strings (such as the indexOf (String)) seem to be operating on the chain of substring returns a part, rather than on the chain saw when the url is printed in its entirety. The corresponding code is less to:
  
  -----
  AssetApiWraCoreFieldDao wraDao = new AssetApiWraCoreFieldDao (ics);
  String wrapperCurrPage = ics. GetProperty ("com.fatwire.gst.foundation.url.wrapathassembler.dispatcher", ServletRequest.properties ", true);
  
  WebReferenceableAsset wraCurrPage = wraDao.getWra (pageId);
  String theLongUrl = new String ((new WraUriBuilder (wraCurrPage, wrapperCurrPage)) .toURI (ics));
  
  This displays the correct URL (http://www.example.com/page)
  out.println ("FULLURL:" + theLongUrl.toString ());
  
  This displays the first 25 characters of a string of unknown characters (satellitescheme://SSURI/?)
  out.println ("substring:" + theLongUrl.toString () .substring (0.25));
  -----
  
  All help to work out what happening would be appreciated – as far as we can tell GSF (or maybe WCS) are originally String to behave in a non-standard way.

  Hi 950972,

  There is little of the magic that is you fool. Basically, if you change out.println () System.out.println () you will see TWO URLS begin with satellitescheme: / /. What is happening, this is the URL which are produced by the ISU Sites still are built with a satellitescheme://...#satellitefragment. Then, what is Server RHN Satellite will process the result and replace the strange chain with one that fits your URL assembler (and in this case, you use the GSF assembler).

  In your code of substring, you are breaking the special chain and are cutting the encoded URL. RHN Satellite Server does not see the prefix and the suffix combined, so it does not have to make the substitution.

  That's why Your ' e see what see Your ' e.

  A big question is however, why you try to process the URL generated by the API. I guess that sort of substitution will happen, but that should not be done. What you trying to do? I'm sure we can find the right way to achieve your goals.

  Kind regards
  Tony

• Div and the positioning of switching

  Hey I tried for a long time understand the concept to organize properly the div and the tables. I ask first my goal because it will probably be clear so I ask:
  
  I have a form in which the lower part must have one of the two formats according to the user choosing from one of the two choices in a drop-down list (Yes, it's deliberately not with radio buttons).
  If my guess is that what I have to do is have two div overlapping in this section and turn their visibility on or off (the mechanics of how to do so that I can understand, this is not what is difficult for me).
  But my understanding of divs (Please correct me if I'm wrong!) is that the z-index can be set only if the positioning is absolute. And if the positioning is absolute, how do I get the divs to be correctly positioned > relative < to the rest of the table in the form?
  
  Is actually a general question of how to organise the divs (for example, if I want this form to be centered on the page, not the absolute of the div positioning returns always the same position relative to the window, while the position of the table moves because it is centered?). I would also welcome with a reference to where I can learn about it...?
  
  Jonathan
  
  

  Well ultimately, I realized exactly what I wanted, but without further my understanding of the original topic, I was interested.

  I just use the attribute to display instead of visibility, so that I could put 2 divs right after the other and alternate their screens, so one or the other has taken the place the. It works fine but I still want to understand how to create dynamic web pages, using div tags that overlap. For example, for rollover menus... I'll wait until I have.

  Thanks for the help!

  Yet once, I really appreciate the help!

• The links don't work is not inside layers div w / absolute positioning / z-index

  My page has a picture of 100% swf full page in a div z-index 1. on the top is another div z-index 2 with links to other pages of my site.

  First of all the links should work in the layer upper div with absolute positioning?

  If yes what Miss me? When I click on the links, nothing happens.

  code-

  " < html xmlns =" http://www.w3.org/1999/xhtml "XML: lang ="fr"lang ="fr"> ".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  sitename < title > < /title >
  < script language = "javascript" >
  AC_FL_RunContent = 0;

  function MM_preloadImages() {//v3.0
  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();
  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)
  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}
  }
  < /script >
  < script src = "AC_RunActiveContent.js" language = "javascript" > < / script > "
  < style type = "text/css" >
  < / style >
  < link href = "css/layout.css" rel = "stylesheet" type = "text/css" > "
  < / head >

  < div id = "contentWrap" >
  < div id = "contentHead" >
  < div id = "logo" > swf with link < / div >
  < div id = "Visibility" > swf with links < / div >
  < / div >

  < div id = "contentBody" >
  < div id = "body" > content Page, photos and download links < / div >
  < div id = "bodyBG" > box translucent (transparent wmode) swf < / div >
  < / div >
  < / div >

  
  < div id = "footWrap" >
  < div id = "footSpacer" > < / div >
  < div id = 'foot' >
  < div id = "catlogo" > link of the swf logo < / div >
  < / div >
  < / div >
  < / div >

  < div id = "wrap" random images of > 100% background swf < / div >

  < / body >
  < / html >

  CSS - code

  @charset "ISO-8859-1";
  * {
  margin: 0px;
  }
  #wrap {}
  height: 100%;
  Width: 100%;
  min-width: 1000px;
  min-height: 700px;
  z-index: 1;
  margin: 0px;
  position: absolute;
  }
  {#contentWrap}
  height: 100px;
  Width: 100%;
  min-width: 1000px;
  min-height: 700px;
  z-index: 2;
  position: absolute;
  }
  {#contentWrap #contentHead}
  height: 25px;
  Width: 100%;
  padding-top: 50px;
  padding-bottom: 25px;
  }
  #contentWrap #contentHead #logo {}
  height: 25px;
  Width: 155px;
  padding-left: 50px;
  float: left;
  }
  #contentWrap #contentHead #topNav {}
  float: right;
  height: 25px;
  Width: 567px;
  padding-right: 50px;
  }
  {#contentWrap #contentBody}
  height: 85%;
  Width: 100%;
  min-width: 1000px;
  min-height: 550px;
  }
  #contentWrap #contentBody #body {}
  height: 485px;
  Width: 860px;
  right margin: 50px;
  margin-left: 50px;
  float: left;
  padding: 20px;
  z index: 3;
  position: absolute;
  }
  #contentWrap #contentBody #bodyBG {}
  height: 525px;
  Width: 900px;
  right margin: 50px;
  margin-left: 50px;
  float: left;
  }
  {#footWrap}
  height: 100%;
  Width: 100%;
  z index: 3;
  min-width: 1000px;
  min-height: 700px;
  position: absolute;
  }
  {#footWrap #footSpacer}
  height: 90%;
  Width: 100%;
  }
  {#footWrap #foot
  height: 10%;
  Width: 100%;
  text-align: right;
  }
  #footWrap #foot #catlogo {}
  float: right;
  height: 16px;
  Width: 80px;
  padding-top: 25px;
  padding-right: 50px;
  }

  The only thing that will cause links not working, that is if there is a positioned element by hiding links from mouse events.  In your case, it would be #footWrap div that is SUPERIOR to any other element on the page (with a z-index 3).  "But not' tell you, because div #body has also a z-index 3, to which I say" you forget that div #body is contained in the #contentWrap div that has a z-index of 2, so #body div has a z-index effective from 2-in regard to the rest of the page is concerned. "  The z-index 3 is ONLY IN THE CONTEXT OF THE PARENT DIV.  Div #body would be higher than another brother positioned with a z-index of 2 and less than another child of the same parents with a z-index of 4, but each of them would never to anything other than a z-index of the 2 visa-vis the page.

  Furthermore, your complete disposal scheme is sure to cause problems.  This isn't the purpose for which the absolute positioning was intended...