Impossible to get Pages to align when using print booklet Option

Similar Questions

• Do not get information on costs when using / * + RULE * / in Toad 9.5

  Hello
  
  All while optimizing a query when using / * + RULE * / in the query I get no info for the cost and cardinality.
  Can you tell me is the / * + RULE * / obsolete in oracle or what can be the reason.
  
  
  Help me..
  
  Thanks in advance.

  948707 wrote:
  Hello

  All while optimizing a query when using / * + RULE * / in the query I get no info for the cost and cardinality.
  Can you tell me is the / * + RULE * / obsolete in oracle or what can be the reason.

  Why do you use this suspicion?

  In addition to the fact that the basic optimization rule is obsolete, the optimizer can either make rule base optimization or cost optimization. Why wait get based cost information when using the basic optimization rule?

  Do not use these tips. Optimisation cost function is far superior to the basic rule.

• Orientation page and balance are grayed out when I "print booklet" as a PS file

  I'm using CS5 (it's old, but it doesn't have me given all the problems yet) and running OS Mavericks.

  I need to print and bind a 10x13cm book that I'm working on.

  The book will be bound in the sections of 16 pages, then m goal is to produce a PDF for each section of book 16 pages.

  Each PDF page will consist of the two places "spreads" impression (i.e., pages 1-16, then 15-2, then 3-14, etc.)

  As the book is smaller than the A6, I can hold each Board on a page of A4 format, printed as 'landscape' orientation
  

  
  

  I will then send this PDF to someone who will then print on a laser printer double sides on A4 sheets.

  I'll fold, bind and cut out the resulting pages and make a model.

  My problem is the following:

  > I go to "Print booklet" and select "2-top shot on horseback" (gives me the page layout, I need)

  > I click on 'Printer setup' and select "PostScript file" from the drop-down list (I will then distill the PS file)

  However, when I go to installation, orientation and position of the page are all grayed out.

  Therefore, when I print and distill the file in PS it is sitting at the bottom left of a sheet of 'portrait' (not centered on the sheet)

  You know another way to get around this?

  If I print directly to my inkjet, then I can control all the centering, etc., but as I need to create a PDF file to send to someone else, it is not much help.

  Any help would be appreciated!

  If you bind in 16 sections of page, you must choose 2-upper bound and specify 16 page signatures. Stitching horse assumes that all the pages are folded together in a single section.

  For the options on the page, you must install and use the ADPDF9. PPD file. You can download it from my drop box on download - Hightail

• Cannot use Print PDF option

  When you try to use Print > Adobe PDF option on a form in SharePoint 2010 (IE11) file opens in .txt, .pdf. Doesn't seem to be SharePoint deliver like CutePDF coverts form without problem. Are there specific settings within IE or Acrobat, IE Add-ons, etc. must be defined to allow this option works correctly?

  Control Panel Printers

  Right-click on Adobe PDF

  Printing options

  Adobe PDF settings tab

  Option: Log files deletion of completed (near the bottom)

• I get "PAGE not FOUND" when you try to download the drivers for my Laserjet 1320N

  I am trying to download a driver for the HP Laserjet 1320N printer

  The link to my driver download page is here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 18...

  But when I go here and click DOWNLOAD all I get the following error

  > > > > > > > > > > > > >

  This web page is not found.

  No web page was found for the web address:ftp://ftp.hp.com/pub/softlib/software10/COL9747/lj-27308-6/lj1320pcl6win2kxp2003vista.exe

  < < < < < < < < < < < <

  I tried it throughout the day. My internet connection is fine.

  Any help greatly appreciate

  Thank you

  esuerpgood

  SPOT ON!

  

• Getting context object null when using the custom menu item.

  Hi all

  I implemented a sample application to add menu item custom to the list of messages and we test this build on 9000 os 5.0.0.41 Blackberryy 1

  On BB 9000, we have 2 message inbox, A like Blackberry by default message inbox and B as long as the Inbox for the e-mail account, I have set up on BB 900.
  I implemented the menu custom application to add menu on the message list option.
  I see this option on both my inbox, the question that I am facing is when I click on the menu item by selecting the email in the message of default A Blackberry inbox I can get the context object were like when I click on the same message next to the Inbox B I'm always get the context as a NULL object.

  Below is the code I used to add the custom menu item.

  Public Shared Sub main (String [] args)
  {
  If (args! = null & args.length > 0) {}
  call from another entry point. Add menu items mark as Spam and mark as suspects.
  {if(args[0].) (Equals ("GUI"))}
  try {}
                          
  create menu items.

  MyMenu ApplicationMenuItem = new EmailFile();
  Add the menu item in the list view and send by e-mail.
  Amir ApplicationMenuItemRepository = ApplicationMenuItemRepository.getInstance ();
  amir.addMenuItem (ApplicationMenuItemRepository.MENUITEM_MESSAGE_LIST, mymenu);
  } catch (Exception e) {}
  Utility.debugLog (try (), CLASSNAME, 'hand', Utility.EXCEPTION_INFO);
  System.out.println("Error:"+e.ToString());)
  }
  } else {}
  show on the application of spam...
  AppMain _theApp = new AppMain();
  _theApp.enterEventDispatcher ();
  }
  } else {}
  show on the application of spam...
  AppMain _theApp = new AppMain();
  _theApp.enterEventDispatcher ();
  }
  }

  Can we know what is the problem in my code or something I'm missing.

  Thanks in advance.

  Navneet Gupta.

  application menu items have been bugged for ages. There is nothing you can do except change your workflow. in some cases, you can recover the app screen and trying to extract something of these fields, but becomes more difficult in the new OS versions because of custom fields used by rim.

• Get a static noise when using the sound track

  I just Adobe Premiere Clip, thanks to Kevin, because he was talking on his vlog every day lol.

  I managed to make a little video, photos of stil, and I work very well, but when I announced a soundtrack, all I hear is static noise, seeing the video, in the first video, but when I save the video and read it, then it sounds very good.

  I use Adobe Premiere Clip version 1.1.2.1161 on Android version 6.0 on a Sony Experia E5

  I understand now.

  I will ask to confirm the media audio information.

  You can use the MediaInfo application which will help you to get all the information about this Audio clip. (https://mediaarea.net/en/MediaInfo/Download this application specifically runs on desktop computers)

  Also, let me know the source of this Audio file.

• New pages Muse download when using Dreamweaver

  I create pages in an existing Muse Web site and download through Dreamweaver, as I always have. Then I get this error. The pages are very well when previewing them in my browser or even a business catalyst site.

  File transfer failed due to the following reasons:

  -Internal error data, perhaps because of the failure to start download.

  -Access denied.  The file exists may not, or there could be a permission problem.   Make sure you have permission on the server and the server is properly configured.

  According to the error message have you checked the permission set for the users of the site backend? It may also link to some glitch at that precise moment on BC DC.

  Thank you

  Sanjit

• Why addresses get repeated every time when using copy paste?

  I send messages with hotmail contacts each week on the bbc (hidden mail) but when I use the system copy paste as there are about 30 addresses most addresses are repeated 2 or 3 times and no one wants to receive the same message 3 times! How can I avoid this problem? Please help me!

  Windows Live Hotmail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/Hotmail?tab=all

• Moved to the new server and updated applications upgraded to the APEX, 4.2.6.00.03 and get the random error when using IE 11.

  Hello

  I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.

  When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.

  

  There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.

  The error does not appear when you access applications through Chrome, but not all users have installed chrome.

  Thank you

  Ronnie

  Well Ronnie,

  This thread suppose to have a problem like yours and resolved. Please try on your side:

  After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');

  Please Urgent help on ora_sqlcode :-28500

  It will be useful.

  Thank you

  Sunil Bhatia

• get the debug error when using scanner on hp laserjet 2840

  I have installed and uninstalled the HP laserjet printer on my computer, as well as on another computer and get the following:

  "An internal error occurred during the processing of the document. Click ok and close the program and try one of the following values: restart the program, restart the PC and try again, reinstall the photo software of imagery and try again.

  Below is the following error... Debug error program C:/Programf Files/HP/Digital Imaging? doc. Proc/dpe_ocr.exe Module: File::38/chkesp.c: line: 42, the value of ESP was not properly saved across a function call.  It is generally a resulft of the call of a function declared with one calling convention with a function declared with a different calling convention printer.

  (press Retry to debug the application)

  Then of course it is said to tell microsoft about this problem.

  Which may indicate a problem with the software itself.

  Did you try to uninstall and reinstall the drivers and software like which seemed to work here.

  Also, did you apply the next update? :

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=LY-40436-1&lang=en&cc=us&mode=3

• I get a paper jam when using the duplexer

  I'm on my 3rd oj6500a.  I had several problems.  The most recent is 2 sided.  I've been in touch with technology services and they replaced the whole printer again, except the duplexer. This is the same as that supplied with the original printer.  two-sided printing does not work and I suspect the duplexer that hangs on the back.  Can I check on before going again to technology services? I already logged 8 hours with them.  I am close to giving up n this model!

  I finally got the printer working.  The store that I bought the printer exchanged the bad Duplexer for a person on a new printer.  Guess what, it worked.  Technical service, after their diagnosis, sent me a reconditioned printer that was supposed to solve the problem.  I kept telling them it was the duplex unit.  I'll send the printer reconditioned to them.  I had a discussion with one of the supervisors tech today and was sorry that I had so much trouble and that he agrees with me on the back of the printer.  Now that it works, I like it.  It's so much better than what I had before.  I just hope that it continues.

• Impossible to get our new HP Envy 5643 printer to work

  We just bought a new HP Envy 5643 printer all in one and I tried to put in place today without success.  I followed all the instructions and it says that we are connected through our router.  We loaded the software and our computer seems to recognize the printer, but when print us anything, nothing happens.   Print jobs just hang out there.

  We went through the troubleshooting online without success and ran the doctor of printing & scanning HP also always without success.  We are very frustrated and could use some advice.

  Thank you!!

  Hi MD-Terp,

  I don't know where you want to, type the IP address.

  If you were able to set up the integrated for the printer Web server, the printer has a valid IP address.

  Then, you simply need to add the printer to the computer using the printer installation software & or the add printer through devices and printers Wizard.

  Printer Setup & Software:

  Click Start, click principally made programs, click HP, click the folder for your printer and then click the icon for your printer. The software of the printer opens.

  Click printer setup & software selection.

• How to change default page scale paint when you print a file

  I use paint all the time, but it drives me crazy that printing by default (through the Page Setup) option is at the 100% level, which almost always means that my file is centered on two or more pages. I try to remember to always go and reset it to fit to 1 page, but if I forgot, my file will be printed on multiple sheets, wasting all that paper and ink, and it drives me crazy! Is there a way to change the default so it is still evolving to fit on 1 page?

  Hi RAllan,

  Your photo may be too big to fit on a single page.

  I suggest you to check the size of the canvas in inches. Go to the Menu bar and select the Image, and select the attributes.

  For a great picture. Follow the steps to fit the image to the frame.

  a. Select the image in the photo folder in Windows Explorer.

  b. select print in the toolbar.

  c. choose: How do you want to print your photo?

  d. check: [photo] made the block option.

  e. click on: [print].

• Page scanned turning when it prints

  I have a document provided by my client. A multipage 8.5 x 11 booklet. All pages "appear" portrait in the PDF, but a single page, which is an image scanned, continues to turn when sent to the digital press. How do fix us this?

  Hello

  Could you please let us know the version of Acrobat is installed on the computer?

  Have you tried to print the document to your local printer?

  I sent a private message, please reply to this message.

  Thank you

  Shivam