Impossible to install on a Satellite P100-488 error 1603 with Win Installer TEMPRO

Hello

I am writing this post because I have a problem to install the software on my Toshiba P100-488 Tempro.

Indeed, on the first screen, I get an error message 'installation stopped prematurely' reading.
When I check in the Windows Vista event handler, then I see that error 1603 is there.

Can you help me please?

Thanks in advance! ;-)

Fred

Hello

I searched a bit on the Microsoft page and found this knowledge base article:
+ * You receive a "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package * +.
http://support.Microsoft.com/kb/834484

Article Microsoft said that the error message appears because only:

+ - File that you try to install the Windows Installer package to is encrypted. +
+ - The drive that contains the folder that you are trying to install the Windows Installer package is available as a replacement player. +
Account of + - the SYSTEM does not have the full control permissions on the folder that you are trying to install the Windows Installer package to. You notice the error message because the Windows Installer service uses the SYSTEM account to install the software. +

I recommend that you check this document and try the workaround provided by Microsoft.

Maybe it helps

Good luck.

Tags: Toshiba

Similar Questions

  • Impossible to install 4000 wireless mobile mouse, receive error 1603 in Vista

    A friend asked me to install a mouse on his laptop, but I did everything writen on error 1603.  The error message says: the facility must close becuse an error occurred.  Check that your computer meets the system requirements on the packaging of the product.  My friend has the packaging of the product.  This is the model 1383.  If this mouse is not compatible with Vista so that I lost a lot of time... lol

    I followed all methods to troubleshoot installation of Intellipoint, Intellitype of the lifecam software.  Method 1-6 and still it do not install.

    Jonatahn salvation,

    Please see the following article some troubleshooting on your question:

    http://support.Microsoft.com/kb/321122

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • How to install Windows XP Home on Satellite P100-488?

    Hello

    I have a computer a Toshiba Satellite P100-488 and on windows vista, but I would go to windows XP.

    What should I DO, please?

    Hello

    Installation of Windows XP Home edition on this model of laptop doesn't have to be so complicated.

    At the first visit Toshiba under you and http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page you can find all the drivers, tools and utilities for Windows XP Home edition. Under product type, choose ARCHIVE. Your Satellite P100 is model PSPADE, so choose the right model.
    As the first file listed by download is installation instructions document. After installing WXP install all the drivers, tools and utilities following this order of installation. It is very important.

    Good bye.

  • Satellite P100-488 - what memory modules that I can use

    Hello

    I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

    Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
    I am unable to find the information of the current type used on this laptop.

    Thanks in advance.

    Hello

    This site of memory should help you:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

    According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

    I hope I could help!

    Greetings

  • When I try to install my software, I get an error message that "Windows Installer could not be accessed".

    Issue of Windows install

    I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

    Thank you, Jeanne Vecere

    You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

    IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

  • Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

    Bought Adobe DC after the trial, after download receive: you have Adobe Acrobat DC (continuous) is already installed.  Please uninstall this product before proceeding with this installation.  Perhaps because the trial was under different Adobe ID?

    Sign out of your account 'other '... Uninstall... to run vacuuming...

    -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

    -using the vacuuming after uninstalling and prior to the relocation is necessary

    -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

    -Restart your computer... Sign in to your account "nine"... Reinstall

  • Can I install Vista on Satellite P100-221?

    Hello. It is possible instead of Windows XP Edition Media Center for Windows Vista on model Satellite P100-221.
    Sorry for the bad English.

    I'm of the Russia.
    Valentine

    Hello, Valentine

    Of course, you can install Windows Vista on this laptop. If you need drivers to check it please http://pc-support.toshiba-europe.com/vista/

    Good luck!

  • Satellite P100-488 - what car for my laptop adapter?

    Hello

    I am writing this thread I wish for an item on Ebay, namely the car adapter PX1189E-1NPO manufactured by Toshiba.

    The problem is my laptop 15V DC entry and the seller, I contacted eBay told me that the PX1189E-1NPO (output of 19V mentioning on the site of Toshiba Switzerland) would be compatible with no problems.

    After a search, I noticed that there is also the PX1188E-1NPO manufactured by Toshiba 15V output.

    I can trust that the seller told me, namely as the Web from Toshiba site that reads for the adapter PX1189E-1NPO car on this link: 4703 http://ch.computers.toshiba-europe.com/innovation/jsp/individualOptions.do?LNG=7&service=CH&selCategory= & oldCategory = 4703 & OPTION_ID = 98981?

    * "Power adapter only DC DC which offers a 120 real watts of continuous power to your laptop." Allows your laptop to be exploited and its internal rechargeable battery of any source VDC 12-32. The adapter fits, conditions and regulates the power of entry to the correct voltage required for your laptop. Included, only two output cables. "*

    Moreover, I am a little troubled because none of the links to the PX1188E-1NPO or PX1189E-1NPO mentions my laptop model (P100-488).

    What do you think of this?

    Thanks in advance.

    Kind regards

    Fred

    Hello

    As far as I know that you need a 15V car adapter
    As you say in your message above the car on eBay adapter supports 19V.

    In your case I would contact the authorised Toshiba partner in your country and would order the adapter car from these guys.
    The ASP can provide 100% compatible parts and in this case, you would be sure that parties are supported at 100% and damage the laptop!

    Welcome them

  • No sound on a Satellite P100-324 using don't Win 7 64 bit

    Hi all

    I have a laptop Toshiba Satellite P100 - 324.
    I installed Win 7 64 bit on this computer and I have problem with sound now.

    My sound does not work. I tried to install a driver but without result.
    I tried to download the driver from realtek but it was the same thing.

    Do you know how I can run on this PC?

    Thanks for your advice

    Marek

    Hello

    Satellite P100-324 belongs to the series of PSPA6E.
    The European driver Toshiba page asserts that Realtek audio driver should be compatible.
    But the Realtek audio driver Toshiba on page is released for Win 7 32 bit, not 64-bit.

    I recommend the driver on the Realtek page. There you should find one that suits.

    You can also check the Dev ID and could find the compatible driver for internet.
    Here's a How TO - doc:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  • Satellite P100-160, not compatible with the latest games graphics card

    My laptop is the Satellite P100-160, which has a 945GM Express chipset is not able to play the latest games. I understand that the graphic card cannot be replaced. So, which eliminates this option...

    Recently, another solution I've heard of is an external graphics such as the Asus XG station...
    http://www.Trustedreviews.com/graphics/News/2007/01/15/ASUS-makes-first-external-laptop-graphics-card/P1
    either this...
    http://www.coolest-gadgets.com/20070611/MSI-luxium-offers-external-graphics-solution-for-notebooks/

    However these devices large need an express card slot, which I'm not sure that this laptop has even?

    If it's not there ways to add to my laptop? And if not, what other options are available to me that may help my laptop to face the latest games?

    Thank you

    Richard

    Hello

    The Intel graphics card is simply not powerful enough to handle the latest PC games.
    You think so, why all the hardcore gamer don t buy computers laptops, but during the CPU clock and buy new graphics for PC s Office cards?

    The laptop is not comparable with the desktop PC. It's just different technology according to the limitations of hardware upgrade on your laptop, you can spend only the HARD drive and RAM.
    You cannot add also all other ports for laptop. It is not possible :(

  • Impossible to install an update from windows. Error message is - Windows Update error 80073712

    MS wrote to install my DVD of microsoft, but I did not.   I don't think I had one for the last 3 computers I've owned.

    I made a disc repair system if that helps and you have run the MS malicious software tool and the update tool.

    So far I have not found anything that even begins to point me in the right direction to solve this problem.

    The computer is a gateway. NV 59 laptop w/windows 7 and 64-bit i5 processor

    The update is;

    Microsoft MS10-034 security bulletin - Cumulative Security Update critical Kill bit ActiveX (980195)

    any help would be great.

    ankles,

    See if this sugesstion can help you:

    Error 80073712 with Windows in Windows Vistahttp://www.windowsreference.com/windows-vista/error-80073712-with-windows-updates-in-windows-vista/updates >

    The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update http://support.microsoft.com/kb/931712

  • Can not install the latest version of Skype: error 1603

    Hi, I get the error code 1603 spype failed while it cannot remove 6.18 version of Skype. I am currently using version 6.11, any ideas how to do to install the new version? Unable to connect. Thank you.

    Try to clear any version currently installed by using this MS Fix It:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en

    If that still does not help, then try this:

    http://community.Skype.com/T5/Windows-desktop-client/impossible-to-install-v6-13-0-104-error-1603/m-...

    Be aware that if you want to install the 6.18.0.106 currently the latest version, then you must use this msi installer link in order to extract the Skype.exe and Login.cab files:

    http://download.Skype.com/MSI/SkypeSetup_6.18.0.106.msi

  • I'm on xp .i want to install Flight Simulator I get the error:-1603

    "It states that ' error:-1603 a fatal error during installation" can it be repaired. " No change has been in the computer.

    any help will be greatly recognized by thanking you in advance. Bill winter

    Hello

    1. where exactly you are trying to install this game?

    I suggest you try the steps from the link below and check if it helps.

    Error message when you install a program of mapping or game from Microsoft: http://support.Microsoft.com/kb/258496

    Hope this information is useful.

  • Impossible to install Vista on Satellite A300 PSAGCE - not ACPI compliant

    Hello

    I'm recovering the laptop from a friend.
    He has installed Windows XP on its Satellite A300 PSAGCE and concluded that of course XP 32-bit Windows does not support the full functionality of the laptop.

    Now I wanted to reinstall Vista that came with it. I have two recovery DVD but when I wanted to start them (them two DVDs) I always get the error message that the system is not fully ACPI-compatible.

    Now of course this laptop should work with Vista and the provided restore DVD should work as well, no?
    I tried to download a Bios nw, but it seems 1.10 is the most recent.

    I also can't find all the ACPI settings in the BIOS that I could activate.

    Could someone help me?
    It is really urgent and driving me crazy!

    Thank you!

    Hello

    Strange! Usually, if you have created the DVD recovery Toshiba using the TOSHIBA Recovery Disc Creator then everything should work correctly and you should be able to install Vista on this A300!

    I put t know if you have changed something in the BIOS or elsewhere, but you should access the BIOS and should define the default settings.
    Then try to boot from the recovery DVD Toshiba again.

    Good luck

  • Bluetooth not working after installing XP on Satellite P100-286

    I have a P100-286, which has bluetooth laptop.
    It worked fine earlier. I used it with my cell phone.

    I have re-installed Windows XP SP2 and I need to use the bluetooth but I can't make it work. I have installed all updates latest BIOS and drivers but still nothing.

    How can I get Windows to recognize the bluetooth? Nothing in the Manager of hardware or control panel for the moment.

    Thanks in advance.

    Hi dan

    I found another thread that you created on the same subject.
    I think you should follow the first thread and shouldn't t divided the whole discussion in two different messages:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=34785&TSTART=0

Maybe you are looking for

  • WinDVD8 Application missing after upgrade to Vista

    I wonder if anyone can help me with this? I upgraded earlier this year to Vista. Insturcitons from Toshiba for upgrade you to uninstall WinDVD 8 before the upgrade. That and of course now I cannot apply updates the original application is missing. I

  • Can I switch to SBS 2011 SBS 2000?

    We are running SBS 2000 with a total of 50 CAL and you want to upgrade. Can do without SBS 2000 to SBS 2011, or are we looking at a new everything and pay full price for the OS and the additional CAL?

  • I need a complete recovery with XP home disc

    How can I do to affect all records needed to get my HP Pavilion a409.uk up and running again.  A family friend gave my son their old HP less hard drive. We bought a new hard drive, but now have the installation discs to get it running. The original d

  • Dell OMSA GUI reference works don't not with 6.4 CentOS 64 bit

    Hello I am trying to install the DELL OMSA on my Dell Poweredge 1950 with no luck setting the GUI part on the server, so I can use the link "https://localhost:1311" in all of our business network. The problem is that I've done the following to at lea

  • How to remove an item from the contextual menu orphan?

    I had a workflow that I added in context menu of Clusters.  I forgot to remove it from the context menu before you delete the workflow, so now it is visible as a choice, but naturally does not start.  Any suggestions on how to get off the context men