Impossible to install Server 2003 on SC1420 with drives fresh

Similar Questions

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• P2V. Server 2003 R2 w / extended drives

  I P2V had an instance of Server 2003 R2 and in VMware converter I had develop three volumes:

  C - system

  D data

  E - newspapers

  When that I start the VM, my computer won't display the D drive was correctly extended. C and E kept their original storage space.

  When I open the Disk Manager, it shows that all three have been extended.

  In Diskpart, it also shows that all three have been extended.

  Can someone point me in the right direction to get the other two correctly extended?

  It's weird... it usually works very well.

  If the converter doesn't do the trick for some reason, perhaps a workaround might be a good solution here. If your converter does not work properly with any machine, then maybe another instance of converter can help you.

  If a workaround is a valid option, here are some links on how to expand the sizes of disks (legacy OS boot partitions are a bit special)

  http://blog.petecheslock.com/2009/04/07/how-to-extend-Windows-boot-volumes-in-VMware/

  http://vSphere-land.com/tips-tricks/re-sizing-virtual-disks

  http://vSphere-land.com/tips-tricks/re-sizing-virtual-disks

  Good luck

  elgreco81

• Tecra S10 - 10F - need Server 2003 or 2008 LAN driver

  I'm looking for a driver lan for Toshiba S10 - 10F for Windows Server 2003 or 2008.
  Or at least, I would like to know the model of network card.

  Thank you

  Toshiba doesn't support an OS Server on laptops, so you will not find such a driver on the Toshiba site.

  You can try to search for a driver on the site of the factory. As far as I know that the Tecra S10 has a Intel LAN card while you should search on the Intel site [www.intel.com]

  In addition, you can try to use the XP Server 2003 driver and driver Vista for Server 2008. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

• Impossible (to install office 2003 after repeated failures of the updates for office 2003 re security)

  The security update for office 2003 on my XP (SP3) kept failing throughout the last week. I contacted the support of MS PC security by phone and I was transferred from the Department the installation program office at Department of update of security for customer service. And none of them had no idea of what is the problem. I lost patience with MS is supported. I followed some other technique posted on the web for the same question and tried to uninstall office 2003 and re - install. However my new installation of office 2003 meets the following error (same error I got when I tried to apply the security updates)

  "Error 2932: an internal error has occurred."
  (C:\WINDOWS\Installer\{91E30409-6000-11D3-8CFE-0150048383C9)\graph.ico 131)
  Contact the Services de Support technique Microsoft (PSS) for assistance. »

  After the Installer rolls back all the facilities. Now I find myself with no office 2003 (I tried office 2007 install with the same result).

  I would really appreciate it if other users can help you with a fix for this or MS support engineer.

  My desktop is hp pavilion PC under XP (SP3).

  Finally, I was able to get good support from Microsoft. A Microsoft support engineer remotely connected to my machine and was able to fix the installation/update directories corrupted microsoft who were at the origin of the problem. I managed to install office with success and things are back to normal. I had given up hope after my original support request (2 weeks back) and the first experience with the customer. But MS technical support engineers (the less one that helped me yesterday) seem to have a good idea of what was going on and was able to solve my problem quickly. Thank you MS support

• Impossible to install Office 2003 on Windows 7 Starter netbook

  Hi - I'm looking for help in setting up my office 2003 DVD on my netbook.  I tried to connect a DVD player to my netbook (not good) and followed with a copy of the contents of entires of the DVD to my netbook via a flash drive (also not good).

  In both scenarios, I get the following error:
  Installation of Microsoft Office 2003: error 1723.  There is a problem with the Windows Installer package.  A DLL required for this install to complete could not be run. »

  Cords or suggestions would be appreciated.

  Hi Steve Heff,.

  You receive this error Windows Installer error 1723 when installing a program. Installation can be terminated prematurely, or there may be a fatal error during installation. Windows Installer error 1723 occurs because Windows Installer cannot start the source files for the configuration of the software application you are trying to install. These files may be missing or damaged. In general, the original MSI installation files will be cached in the ' C: winntInstaller directory before installation begins. Inappropriate caching of a file MSI is main causes of errors, too.

  First of all, check if the Windows Installer service is started in the Services.

  1. click on start.
  2 type Service to start the search.
  3. Locate the Windows Installer Service in the Services window.
  4. make sure that the service is started, if it is to restart the service and check.

  Now try to install Microsoft Office and check.

  If you are unable to install, then I suggest that you uninstall all files related to Microsoft Office 2003 by using Windows Installer Cleanup Utility.

  See link: use the utility Windows Install CleanUp to remove Office 2000, Office XP or Office 2003: http://support.microsoft.com/kb/290301

  Now try to install Office and check.

  To get help, I would recommend that you visit the Microsoft Office forums from the link below:
  Applications - Office discussions http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install Server 2003 custom

  Hi first post so here it goes:

  PE2900III with Perc6 / i, SAS 15 K 73 4 hard drives in a RAID5 configuration, map No. DRAC.

  I used the OMSA 5.3 (5.2 have not seen hard drives) to load my 2003 OS, but it will not use my winnt.sif answer file.  I need some windows components are required and others are not.  I tried to provide the answer in the form of custom script file, but no go.

  I tried to load the operating system directly on the drive, but when I provide the RAID drivers at the F6 prompt will install first, they won't copy starting from the floppy to the hard drive.

  If I can get the generation utility to use the answer file, I'll be good.  All thoughts.

  Thanks for any help.

  
  

• Impossible to install on the PC field with redirected folders

  I'm trying to install Skype on a PC field with redirected folders and the installation crashes with

  "Invalid drive H:\. "then code 1603.

  It is a portable Windows Pro 8.1 with all updates. My Documents and the office are redirected to the H: drive with offline files enabled and it is currently connected to the network.

  I installed with the MSI of Skype version and installation is perfect.

• Impossible to install any program to do with windows or printer drivers?

  I can't get windows updates keep giving me. I think I'm up to about 55 so far. I can't get the drivers installed by windows - they install form Epson, but then a pop-up at the bottom of the screen says unable to install the drivers and it cannot recognize my printer. I also tried to download Heimdal and is not yet open. I tried to find WindowsUpdate.log to see what is happening and what I can see is not permitted. I even tried to download - System Update Readiness Tool for Windows 7 for x 64 based systems (KB947821) [October 2014]

  and who says windows cannot open this file. So I don't have an idea of what has gone wrong with the system and I don't really want to do a clean install as I have so many programs it takes me forever to re - download all programs and find all the codes, etc.

  So is there someone who can solve this problem?

  If so, I would be extremely and eternally grateful.

  thanking you all in anticipation of a good answer.

  Hello

  Thank you for the update.

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Press Windows key + R, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Press Windows key + R, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this helps.

• Impossible to install Laser Jet - new Macbook with OS 10.5.6 - 5.1 M1522-nf-mfp

  I tried to set up assistant and opening the folder applications such as that suggested in support, but it is not successful.

  I connect via the USB port.

  Thanks for the tips. I'll get print mac th article. Problem solved now after 90 minutes with technical assistance. Had to remove all the files from HP and then reinstall and then remove and add the device again.

• Impossible to install Dreamweaver CS6 Upgrade! Hard Drive dump - error: failed to check for genuine Adobe software

  Hello

  I am unable to install Dreamweaver CS6 upgrade from versions CS4 Hard Drive DUMP-

  Error: failed installation

  Verification for genuine Adobe software failure

  The product you want to install is not a real software from adobe and seems to be counterfeit.

  .....

  Can someone help me with this question. I installed earlier but DVD, I am unable to find the DVD. I have a copy of full dump DVD network.

  Can someone help me solve the problem.

  Note: I installed Dreamweaver CS4 with serial number number.and try to install the upgrade to cs4.

  Help, please.

  Thank you

  Sin

  It was because I was installing directly from network dump.

  I managed to install and register the software.

  Thank you and my problem is solved.

• Impossible to install the m Nvivia NVS 4200 driver in Windows XP

  I get a message saying no graphics support on the system.

  Hello

  I would venture a guess. Does your machine have a switchable GFX model? I couldn't really determine that.

  If so, Windows XP does not support this, you must set the GFX edge or dedicated in the bios, otherwise it won't work. Be aware that only the dedicated GFX can access digital ports, like port, through the docking station. This is a technical limitation that cannot be changed.

  Concerning

  Michael

• Server 2003 R2 with installed VendPrint, clients servers randomly drop their printer.

  Original title: Server 2003 R2, VendPrint and 7 guests

  Here at the College, I work for, in our libraries, we have Windows 7 open lab stations.  To print, there is Server 2003 R2 servers with VendPrint installed, pay and control flow.  We are having a problem with clients to randomly fall their printer.

  The printers are installed with the following script:
  "rundll32 printui.dll PrintUIEntry /ga /n\\ [server name] \Printer.
  start/wait sc stop spooler
  start/wait sc start spooler.

  The mode of operation of the VendPrint is a Microsoft share for the virtual printer, then the boss free labour through payment, how it is a local printing to the printer via the USB port.

  (1) anyone have an idea why this might be?  What other information would you like all need?
  (2) someone think the upgrade to Server 2008 would be useful?  What happened to Windows 7, which has the limit of 10 connections even that XP doesn't?

  Thanks for all the ideas.

  Hi Michael,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  TechNet Windows Server forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Impossible to logon to share the folder with "User must change password at the next logon" in Windows Server 2003

  I use Windows Server 2003 R2 SP2 as a file server.  I create new user 'A' in Windows Server 2003 as well with the option "user must change password at the next logon" selected and give way under the group users and users in the domain for this user.  I then share an output folder.  User 'A' is using Windows XP SP3 to connect to this shared folder.  However, when I try to connect, Windows reappear to enter user name and password.  I think it is the limitation in Windows that the user 'A' will be unable to change the password at the next logon or change password at any point in time at all.  Correct me if I heard wrong.

  If possible, can someone enlighten me what is wrong or what I need to do for user to access folder and change the password on the first logon.

  If what I described is not possible, is there another way for me to configure for the user to access share folder so that the user doesn't have to join domain or user of the AD?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  You will need to repost the above Server forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.