Impossible to install the feature patch update from Windows Update KB 2822241 (Patchday, April 9) Windows has no

Similar Questions

• Impossible to install the KB979687 security update, receive error message: 80070490

  Original title: Error Codes, this applies to: 80070490 Vista security update KB979687. Should I be worried. The update failed during the last 6 months of work.

  as above. This applies to error codes: 80070490 Vista security update KB979687. Should I be worried? The update failed during the last 6 months of work.

  Hi Mark,

  What antivirus application do you use?

  It is suggested to install the security updates. Follow the methods suggested below and check to see if they help.

  Method 1: Run the clean boot.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 2: Try to install the update of security for Windows Vista (KB979687) manually since this link.

  For 32-bit:

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24159

  For 64-bit:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25102

  If the method above does not work, proceed to the next method.

  Method 3: Refer to this link.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Warning on site: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps!

• Impossible to install the last Lr update

  I'm in the United Kingdom. I got Lr since December 2013 and have always been able to install updates successfully. However, I can not install the newest one. I do not get redirected to the usual update page. Instead, I am redirected to a page to sell USA Lightroom. Why is this happening?

  I use the second of my three licenses that I had to reinstall Lr after a laptop rebuild in February this year, but I don't think it should affect my ability to download updates.

  It offers 6 LR, which is not a free upgrade, with the exception of the subscribers to the CC cloud.

  If you have a standalone license, so you need this update.

  The latest version of LR 5 is 5.7.1 and you can download it here if you are still on an old version: Windows, Mac

  Buy the upgrade go to page from adobe UK. At the bottom of the selected products, scroll down to LR, click on buy and select full upgrade instead of the version.

• Impossible to install the Version of update on Vaio Care 8.4.1 07026

  I recently upgraded from win 8 to 8.1 Win.  I have a Sony Vaio, model # SVT15112CXS.  My Windows updates are up to date, all my apps are also updated and all my Vaio updates are underway except the one that does not install.  The Vaio Care Update Version 8.4.1 07026.  It passes through the download process, then it displays the window where there is extraction "Sony Packaging Manager", shows that it is preparing to install, so he says it configures Vaio Care, then it collects the required information, he goes on to say that he is about to remove the old version of the application, then, he says he removes the old version.  It stops after that and then gets listed under the box that says "update of programs that failed to install.  It does not give a reason.

  I use Windows Defender and I even added Vaio Care to the list of excluded files.  When I called Sony tech said that my computer is no longer under warranty, I would have to pay $100 to fix.  Does anyone have solutions or ideas as to what is happening?  Any thoughts would be greatly appreciated.

  Thank you.

  Hi earthdancer,.

  Have you tried reinstalling your VAIO Care program and get the latest update from eSupport? Uninstall your current program of VAIO Care, download the originally shipped version of VAIO Care to eSupport (ver. 8.1.0.10120) and once that it re-installed, try to update to 8.4.1.07026. Thank you, Sean

  If my post answered your question, please mark it as "accept as a Solution.

• Impossible to install the software or updates

  I tried for days to install updates for Windows Vista 64-bit with SP2.  It says it installs only 6 of the 9, but I can't install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB973923) and

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688).  After uninstalling and installing Net framework.  I got this to work.  For this reason, I can not install Adobe or ITunes.   I fixed my registry, spending 2 hours with Adobe and have been to Microsoft technical support, but they were no help.

  I see this question there, but not a solution.  Micorsoft is your problem.

  Hello

  ·         What happens when you try to install the updates or application (error message or error code)?

  ·         This all the steps that you have already tried (if you can list them wouldn't us repeat the same steps)?

  To check the error code, follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Try to download and install the update manually and check if this is useful.

  Step 1:

  To download the update, follow the link below.

  http://support.Microsoft.com/kb/973923

  Step 2:

  Before you install the update to configure the computer to clean start State and then continue the installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Also, for the installation of any application, you can try to install after you have configured the computer to clean the start state. Also uninstall any partial installation of applications that they may conflict with the installation.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the graphics driver downloaded from the ATI site

  I can't updtare the catalyst for the ATI Radeon 3470 I downloaded the new version of the ATI site and first of all, I downloaded the xp version, thinking that it was Vista.

  He stopped me after trying to install the version of Vista after restarting the installation.
  He did not recognize the driver or I do not know why the screen continues with bad resolution can you help me please.

  The site of ATI graphics drivers are not designed for the use of the laptop and are not certified by Toshiba and, therefore, it of not possible to install it.
  Using the graphic drivers of Toshiba you are always on the safe side.

  I have heard and read that some user installed drivers graphics omegadrivers.net site but these drivers are not supported by Toshiba and can be installed ONLY at your own RISK!

• Impossible to install the symantec .exe file, error windows must be restarted

  Hello!

  I recently lived with a problem while installing symantec antivirus, when I try to install or run this file, the error is showking as symantec has detected that the system must be reset to install this... I rebooted several times, but the problem always arises. Please can you solve this problem? Just reply to me as soon as possible if the problem can be solved.

  Concerning

  Mohammed Fahed

  Hello

  1. don't you make changes on the computer before the show?
  2 is the limited with the Symantec AntiVirus installation issue?

  Method 1:
  You can try the steps in the link and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Method 2:
  Perform a clean boot and check if you are able to install the program.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can check if the windows service install is started. Follow these steps:

  a. Click Start, type services.msc in the start search box and press on enter.
  b. in the list of Services (Local), right-click on Windows Installer and then click Properties.
  v. If startup type drop-down list is set to Disable, select the manual option in the drop-down list startup type.
  d. click the button under the status of the service item and click OK.
  Method 4:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Reference link:
  Install programs: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

• Impossible to install the Cisco VPN Client on Windows 7

  Hello

  After an uninstall successful VPN Cisco version 4. I try to install the Cisco VPN Client 5.0.07.0290 version.

  But after the launch of vpnclient_setup.msi, the wizard starts. When I click on the next button, I get the following message: "installation ended prematurely because of an error".

  As an attachment, I add the details of the discovery of the error in the logs of windows (logError.txt) and the logs generated by the MSI installer in verbose (log2.txt) mode.

  My computer is a lenovo W500 with Windows 7 64-bit and 4 GB of memory (compatible with the requirements of the Cisco VPN Client).

  I have administrative privileges on this computer.

  Please help me!

  I need to use it to connect to my corporate network.

  Thanks in advance.

  BR

  Jerome

  If you want to try another software, I know that works I used it up until cisco came out with a 64-bit client there. Is the 64-bit version of shrew 2.1.0 it worked very well, you will just need your file FCP of cisco for import into if you have. This will tell you if the client or your system at least.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Impossible to install W8.1, impossible to install the KB2862973 update with error code 80073712, cannot connect to the microsoft account

  I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update.  Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired.  Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now.  If this problem persists, look for 'referee' on the start screen. "I also performed this task without success.  Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712.  I looked for solutions to this problem, and those who have tried unsuccessfully.  I really need someone to tell me how to fix all these issues, because I believe they should be linked.  It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!

  Thank you

  Shane

  Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.

  I suggest you to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821

  Keep us informed.

• Impossible to install the important update, code 66A

  I tried to install this important update, but it keeps the default, something to do with code 66 a. I looked online and someone said to repair the file in the page uninstall, but this option is not available for me. Can someone please?

  Error code '0x8007066A' when you use the Windows Update Web site or Microsoft Update to install the .net Framework update:
  http://support.Microsoft.com/kb/2507641/

• Error code 646 when installing the automatic/important updates for Windows Vista (with Service Pack 2)

  Recently, I received 646 error code when you try to install the important/automatic updates to Windows Vista. What patches are there for this issue? What risks are there to do not overcome this problem?

  rivercitylady,
  Usually with the code 646 error, if you download the update and install it manually that will fix the problem.
  Go to the Microsoft Download Center and search for the number of the update has failed.  Download on your PC, then run it from there. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the Safari extensions; error message

  Impossible to install the Safari extensions; error message

  Hello

  Make sure that OS X and Safari are up-to-date.

  Open system preferences > App Store, then click on: check now

  Your profile says your Mac works v10.11.1. The v10.11.5 update is available. This is maybe the reason why you can not install the Safari extensions.

• Where should I install the Boot Camp updates: Windows or Mac?

  With the help of Boot Camp, I have installed Windows 10 when my OS from Apple was Yosemite. Recently, I upgraded the operating system Apple to El Capitan. Today, while working on the side of Windows 10 things, I got a notice of pop-up that I should install the update for Boot Camp. So I have two questions actually:

  • (1) was not the latest version of Boot Camp included in the update of El Capitan? and,
  • (2) should I download it then install the Boot Camp update, when I run Windows 10 or when I'm on the side of Mac?

  1 n ° with the exception of the Boot Camp Assistant, all components of Boot Camp are Windows software and does not part of Mac OS X.

  2. do Windows.

  (137099)

• Automatic Update keeps wanting to install the same 5 updates every day even after what they are already installed.

  The automatic update keeps eager to download and install the same 5 updates daily. These 5 updates are KB979909, KB982168 KB982524, KB983583, KB2418241. I looked at the log of update and it showes them already installed. This has happened since November. What can I do?

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/32ba77cb-cff2-4155-b70d-e31b7ba4c8df >