Cannot install printer with Windows 8.1

Similar Questions

• 4650 HP Office Jet: cannot select printer with Windows 10

  After 3 excruciating days between HP and Microsoft technicians, I'm about to throw the laptop.

  set up mobile printing for use by iPhone, iPad and android, as well as office with Windows 8.  They work great.

  When I try to connect a laptop computer and a laptop with Windows 10, we are unable to select the printer.  It is on the network, but cannot print.  Microsoft insists that HP is not correct for our machines printer driver and HP says that's a matter of Windows 10.

  All I have this problem and knows how to solve?

  Hello

  Please download the software and the following drivers and install them on your Windows computers 10 (all):

  http://ftp.HP.com/pub/softlib/software13/COL61230/MP-147816-1/OJ4650_72.exe

  Be sure to select Wireless when you configure.

  Kind regards.

• OfficeJet Pro 8600 Plus: Officejet Pro more than 8600 - cannot install printer on Windows 10

  I have upgraded from Windows 7 to Windows 10 and CANNOT install the printer.

  After the upgrade, the HP software prompted me to reconnect to the printer.  I chose for a wireless connection.

  The process hangs / locks the screen shown on the picture below.  I have tried just about EVERY related solutions posted in the community and have come-up-small.

  Did anyone else out there having the same problem?

  

  hjs_19... Thanks much for the reply.

  I was finally able to solve the problem using 'Reset this PC' in Windows 10 - see pictures below.

  My system has been corrupted somehow.  I don't know what was the cause, but the system works better than ever now (Lenovo T430 8 MB of RAM).  The process of 'Reset this PC' purged MANY foreigners "tricks" of the machine.

  

  

• Cannot install printer on Windows 8.1

  I can't install my printer HP Deskjet all-in-one J610 series on my computer that has Windows 8.1.  A message appears that says can only install to Windows 7.  Please can you tell me how to overcome this problem.  Thank you.

  Is your printer the 3050 J610 and you really have Windows 8.1

  Uninstall what you have done so far.

  Temporarily disable your antivirus software and firewall

  Go to this site, select your operating system and download the printer installation software

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=4066452

• Cannot install acrobat with windows 10 11 standart

  Reached almost the end of the installation, the installer go back and uninstall Acrobat 11 and asks me to restart. Thanks for your help.

  Uninstall the acrobat and reader versions.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  then reinstall.  If necessary, use the compatibility mode to install.

• I get a "cannot install printer because a policy has been enabled on your computer that blocks NT 4.0 driver ' how can I install my printer?

  I have a HP Pavilion dv6500 running Vista 32 bit. I just bought a new printer, a HP Photosmart C4640, when I tried to install and connect I get a message indicating that it cannot install printer as a policy has been activated this block driver NT 4.0. I have run all updates of software and drivers, but still get this message. I've been at this for almost a week now. I've been doing the HP race with regard to aid. I am VERY fusturated at this point and desperately need help. What should I do to make this work?

  Hi jessheffernan2003,

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information, see the link below:

  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  http://support.Microsoft.com/kb/931719/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why cannot open itunes with windows 10

  Why cannot open iTunes with windows 10

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. (Yes, I see that you've done that but maybe not the specific deletions which are mentioned).

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  See also install missing components in case the installation of a component at a time is successful.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot install error code Windows update 9 48

  Original title: I'm unable to install the windows explore 9 9 48 error code

  I can't install the windows explore 9 9 48 error code

  Hi Mario,.

  Thanks for posting in the Microsoft Community.

  According to the description provided, looks that you can not install the update to Windows.

  It would be awesome if you could answers to these questions in order to help you further.

  1. are you referring to Windows update?

  2 have you made changes on the computer before this problem?

  3 is confined with any particular update?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Note: The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Note: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• HP Officejet Pro 8600 Plus: I'm trying to troubleshoot printer with Windows 10.

  I removed my original pilot, launched my CD orig who downloaded correctly.  When I go to find in my device Mgr it sees and as to continue through the wizard to add to my HP Pavilion he asks that I add the "WPS" I can't find it anywhere in my manual or my printer.  How can I get my WPS so I continue and restore this printer with Windows 10 settings?  Then I should be able to download your drivers 'full foot' and the laptop talk to the printer (at least I hope it's going to happen).  Currently you can only print via USB then please get back to me with an answer as soon as possible.

  Hello

  The CD may be a little old. Please download and install the software and the following driver on your Windows 10 computers (new or updated):

  http://ftp.HP.com/pub/softlib/software12/COL40120/bi-108858-4/OJ8600_1315-1.exe

  Kind regards.

• Windows 7 - cannot install system updates - "Windows Update service... does not work."

  original title: Windows 7 - cannot install system updates - "Windows Update cannot currently check for updates, because the service is not running." You may have to restart the computer. "

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: try to get weekly updates applied.  Since the 1845 update I couldn't have Nicrosoft updates applied to my system.  A disable the updates because the system continues to try, and I try again me and try all the time.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dena,

  I solved the problem: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  "FixIt" MS reported that he had fixed everything, and W7 update mechanism works very well- but the problem remains:http://support.microsoft.com/kb/971058

• Impossible to install ubuntu with windows 8 double trunk

  I have lenovo laptop g500s with windows 8 pre installed. I couldn't install ubuntu (linux) alongside win 8. When I tried to dual boot, this laptop with ubuntu victory 8 boot manager was corrupted.can someone suggest me how to install ubuntu with windows 8.

  Hello Samyajith,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the exact error message or code when you say, 'victory 8 boot manager has been corrupted?

  I appreciate your efforts to resolve the issue.

  Please refer to the suggestions for aufa35 replied on 6 January 2014 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/dual-boot-Windows-8-and-Ubuntu/cce29abd-4190-4e9d-87E3-33b7fb640569

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If this does not help, then I would recommend you post the question on the Ubuntu forums.

  Ubuntu community forums
  http://community.Ubuntu.com/contribute/support/Ubuntu-forums/

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start

  

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.