Impossible to reduce new volume allocated to install dualboot windows 10

Similar Questions

• cocodede80070422 Wiondows 7 udate same error appears every time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  errorcodede80070422 Wiondows 7 udate even appears each time you start. Impossible to verify new updates. Followed to fix windows nothing helped.

  Hi Colin,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem you found error 80070422 when checking for Windows updates. This problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 2

  Step by step instructions for the fixed number.
   
  (a) press the Windows key + X , and then select (Admin) command prompt.
     
  (b) on the prompt window open copy and paste commands (all at once)
   
  net stop wuauserv

  net stop cryptSvc
   
  net stop bits

  net stop msiserver

  Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution

  Ren C:\Windows\System32\catroot2 catroot2.old

  net start wuauserv

  net start cryptSvc

  net start bits

  net start msiserver

  (c) wait for the course to complete.
   
  (d) close the command prompt.

  Now, try to reinstall Windows updates and check if it helps.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• New computer with 7 installed - tried windows update and stuck saying preparation set up windows

  Just bought a new Sony Vaio with windows 7 installed and went to windows updates, as they recommended. Updated and said to reboot. Now he's stuck saying prearing to set up windows. Not turned off your computer. Help please...

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Here you need to start your computer in safe mode and do a system restore.

  Start the computer in safe mode and check the number.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  You have to try to perform a system restore to go back to the work settings, to do that follow the instructions below:

  1) click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (2) in the System Restore dialog box, click on choose a different restore point and then click Next.

  (3) in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4) click Finish.

  If you still have the problem then we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking Start , all programsand then click Windows Update.

  2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Crashes after installing a new hardware, then fresh install of windows 7 on old HD

  Has decided to update some parts (motherboard, CPU, memory), and kept the source of power, hard drive, hard drive and case.  Had problems with it after the installation of the new equipment, would crash when windows starts (he did not altogether at the login screen).  So, I decided to start over with the new installation of Windows 7.  No dice, crashes again, but this time after about 10 to 30 seconds in normal mode (if I have connection immediately, otherwise it will crash if left on the login screen).

  Here is the log of the events of the last attempt to start (the oldest writing down) (including start in normal mode, then start in safe mode with networking)

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {7D096C5F-AC08-4F1F-BEB7-5C22C517CE39}

  DCOM got error '1084' trying to start WSearch service with arguments "" to start the server:

  {9E175B6D-F52A-11D8-B9A5-505054503030}

  DCOM got error "1084" try to start the service EventSystem with arguments "" to start the server:

  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  DCOM got error '1084' trying to start the ShellHWDetection service with arguments "" to start the server:

  {DD522ACC-F821-461A-A407-50B198B896DC}

  Winlogon notification subscriber was unavailable to handle a notification event.

  The next (s) starting or starting system could not load:

  discache

  spldr

  The system has rebooted without judgment properly first. This error can be caused if the system unresponsive, crashed or unexpected power loss.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  The application-specific permission settings do not authorization for the application server COM with the CLSID

  {22279AF5-03AE-4CAF-989D-2530918B2F1C}

  and APPID

  {0773CCD6-59A2-4D26-B235-19247767E645}

  the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) of the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool.

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  = Test SSD software - revision: 12/04/14 =.

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:
  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:
  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Passage burn in test: http://www.PassMark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• I installed a new hard drive and went to Windows 7 Pro. And Ms. Updates do W o r k.

  I installed a new HD and then installed MS Windows 7 Pro... the installation that I chose not to do the updates but elected to do them later time... re booted system and all this time I was connected to the net and I activated the new facility... However when I TRIED to get the TOP dating Ms... It wouldn't connect... I tried the fix but not with a "clean boot"... it's always the same tool will not connect!  So what of next... I need of these very important updates and of course need answers too!

  The error code I got was code 8024A 006 that it is in the MS update panel

  After he rann throughout the night!

  You will find these solutions and many other things that that might be useful to www.canadiantech.info

  About 120 pages.  Most of it is written for non-technical people, but there is a section for computer scientists.

• Cannot create the new drive and impossible to reduce c drive I want...

  My laptop disk management displays the following information...

  (1) healthy OEM 14.75 GB partition

  (2) 200 MB Healthy (System, active, primary partition) (containing the system files)

  (3) c: in good health (start-up, swap files, dump, primary) (which contains Windows) total 421 GB, free 400 GB (which contains Windows)

  (4) D: sound logic GB 29 disc

  I want to shrink the C drive in 30 GB and want to do at least 3 drives more. I also have linux in the D drive.

  so when I want to shrink C drive, then it shows the size of available shrink space in MB 212653 and total size after shrink 219284MB. This means that my C drive will at least 219284MB. but I don't want that.

  Another problem, when I tried to create a new simple volume the following error comes.    You cannot create a new volume in this unallocated space because the disk already contains the maximum number of partitions.  What can I do?

  The existence of files across the disk will limit the amount by which you can reduce the volume.  You can defragment to reduce this, but there will always be property files that will create a limit for you.  I had to do a full install in a 70 GB partition for Windows CE - with my first attempt to install, I could not it less than 250 GB even if I tried to partition when installing Win7 had finished.

  I think you'll have to decide a complete reinstall to resolve the issues, but that's just my opinion.  During installation, choose the option to partition the drive & set it to create a partition that is not less than 70 GB and Windows will install fortunately in this.  You can then use the rest for a partition of data user files.

  You don't mention your brand of PC, but even once, as Palcouk said, you will have some facility in order to safeguard the partition image factory of the manufacturer of the PC in DVD or USB [Dells certainly have the USB option for this].  Fix this before whatever it is that you will destroy this partition when reinstalling and might also do so just try to move partitions.

• Vista has created new volume on HD during the update. Need to delete.

  I use Vista Ultimate. During an update, Vista has failed. As part of the recovery process, he created a new volume on my hard - J drive:-where he put all my old files. He then created a brand new facility on c: I have no idea why.

  He spent 75% of my hard drive to the backup volume J space.

  Now, I've got all the files I need recovery j: and I want to reallocate space on c: and get rid of j: entirely. I shrunk J: but Vista will not let me extend c:

  I did not have enough room on j: to run Vista Ultimate, so I really need to reclaim space. Could someone please help? Thank you in advance.

  Hi NancyDL,

  What happens when you try to extend the volume?

  To create a partition or volume (the two terms are often used interchangeably) on a drive hard, there must be unallocated space on the hard drive (empty) or a free space in an extended hard disk partition.

  If there is no unallocated space, you can create some by reducing an existing partition or removing a partition.

  I would suggest you remove j: drive to make it also allocated and then extend the c: volume.

  For more information, please see the link below.
  Create and format a hard disk partition
  http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partition

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How to reduce the volume of alerts in FF when using webmail without lowering the system volume (Mac)?

  I use Mac OS 10.6.8.
  When I access my webmail via Firefox, I get a Twitter hard whenever I have send or receive a new email.
  I contacted my ISP (Optimum) and they said tell Firefox to my computer to make the sound. They say that they have no control over it.
  I tried to reduce the volume of alerts in my system prefs, but it has not affected the volume of FF.

  How reduce or disable volume in FF when using webmail without lowering system volume?

  Thank you!!! The 'sound' button off in their preferences. Fixed. (It was so freakin ' fort!)

  I, in turn, chatted with Service to customer of Optimum and tells them that they must tell their supervisor to better educate their own service to the customer, instead of passing the ball. We'll see.

  Let contributors Mozilla smart to not return the ball.

• When I reinstall El Capitan on a new drive, should I install device drivers?

  I am completely new to the Mac, after using Windows all my life.

  My question is; I'll put a new, larger internal SSD in my MacBook Pro and of course re - install El Capitan.  I need to download and install device drivers, as you do with Windows machines?

  In addition, my MacBook Pro is 8 years old and the battery is endangered.  How a new battery will be?

  N ° OS X contains everything that is needed. You have a project in front of you. But see the following:

  How to replace or upgrade a drive in a laptop

  Step 1: Fix the hard disk and permissions

  Boot from an OS X install disc

  1. Insert the OS X installation disc into the optical drive.

  2 restart the computer.

  3. immediately after the ring, press and hold the C"" key.

  4 release the button when the spinning gear under the Apple grey dark

  logo appears.

  5. wait for the installer to finish loading.

  Boot from a recovery HD:

  1. reboot the computer.

  2. immediately after the ring, press and hold the

  'ORDER' and the set of keys 'R '.

  3. release the keys when appears the utilities Menu.

  After the installer loads, choose your language and click on the button continue. When the menu bar appears, select disk utility from the menu of the Installer (the menu utilities for Tiger, Leopard or Snow Leopard).

  For Lion or later select disk utility in the main Menu of public services.

  After disk utility loads select your entry from hard drive (to mfgr. ID and Player size) of the list on the left.  In the disk utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If Disk utility reports errors, that it can not solve, then Disk Warrior or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  Second stage: Remove the old drive and install the new drive.  Place of the old drive in an external USB enclosure.  You can buy one at OWC , which is also a good supplier for the readers.

  Step 3: boot from the external drive.  Restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager appears.  Select the icon of the HD to the external hard drive recovery, and then click the arrow pointing down.

  Fourth step: new preparation of the hard drive

  1. open utility disk in the utility Main Menu, then click on the continue button.

  2. the disk utility charges and then select your new hard drive (it's the entry with the)

  MFGR. ID and size) from the list on the left. Note the SMART status of

  the reader in the status area of THE.  If it says not "verified" and then the player

  is failing or has failed and will need replacement.  Otherwise, click on the

  Tab in the main window of the disk utility partition .

  3. in the title of the Volume entitled plan defined the number of partitions from

  the drop to one. Set the type of Mac OS Extended format

  (Journaled). Click the Options button, set the partition scheme

  GUID then click on the OK button. Click on the Partition/apply button and

  Wait until the process is completed.

  4. Select the volume you just created (it's the auxiliary input under the)

  entry by car) from the list on the left. Click on the Erase tab in THE MAIN

  window.

  5. set the type of format Mac OS extended (journaled). Click on the

  The button options , check the box for zero data and click OK to

  return to the window to erase it.

  6. click on the delete button. The formatting process can take up to several

  hours depending on the size of the disk.

  Fifth step: clone the old disk to the new disk

  1. Select the destination volume in the list on the left.

  2. click on the tab restore in the main window of THE.

  3. check the box labeled destination Erase.

  4. Select the destination volume in the left list and drag it to the

  Destination entry field.

  5. Select the volume of the source of the list on the left and drag it to the

  Input source field.

  7. check you correctly, then click on the restore button.

  Destination means the new internal drive. Source means the old external drive.

  Step 6: open preferences Startup disk and select the new internal volume.  Click restart.  You should boot from the new drive.  Eject the disk and disconnect it from the computer.

• 420 HP 2000 ca: driver problems and hotkey on a new install of windows 7 on a HP 2000 420 ca

  Hello, new here, long story short:

  LAPTOP MODEL IS: HP 2000 420AC

  1 REINSTALLED A BRAND NEW HOME FOR WINDOWS 7 64 BIT.

  2. DOWNLOADED/INSTALLED ALL THE DRIVERS ON THE SITE OF HP FOR THIS MODEL.

  3. THE DRIVERS WIFI/wireless connection would NOT MOVE, I GET a MESSAGE READING "802.11.a/b/g/n wireless device not found adapter. The device may not be present or could have been ejected/disconnected from the system. Abandonment of the installation, please insert the card and try Setup again."

  The wireless card was not removed from the system, in fact, the laptop was never even opened.

  4. THE SHORTCUT KEYS DO NOT WORK TO TURN ON WITHOUT WIRELESS/WIFI, OR VOLUME CONTROLS, SCREEN BRIGHTNESS OR... THERE SEEMS TO HAVE NOTHING TO DOWNLOAD/INSTALL IN THE LIST FOR THOSE NOT MORE, A LACK OF FUNDAMENTAL TO THE SYSTEM. WITHOUT IT, NO WIRELESS (ETC.), PERIOD. THIS ISN'T LOOKING GOOD SO FAR.

  5 TIPS IN THE SITE WEB/FORUMS TO INSTALL "HP WIRELESS ASSISTANT" IN THE LIST OF AVAILABLE/SUPPORTED DRIVERS, BUT IT DIDN'T THERE HAS NO "HP WIRELESS ASSISTANT" IN THE LIST TO DOWNLOAD. AND TO DOWNLOAD IT DIRECTLY TO THE PAGE OF THE WIZARD ITSELF YOU MUST HAVE THE COMPUTER OPERATED BY CONNECTED DIRECTLY ONLINE TO INSTALL, YET THE COMPUTER ITSELF CANNOT CONNECT ONLINE IN THE FIRST PLACE, WHICH IS A MAJOR CONTRADICTION AND IRONY IF YOU ASK ME... «TO CONNECT ONLINE TO REPAIR US DIRECTLY SO THAT YOUR COMPUTER CAN APPLY ONLINE...» ». HUH?

  QUESTION: SOMEONE HAS A FOOLPROOF METHOD, THEY KNOW OF A WIRELESS ON A NEW INSTALL OF WINDOWS 7 ON THIS MODEL/S?

  MAYBE THE SITES THAT HAVE BETTER BACKUPS FIX HOTKEY DRIVERS AND WIRELESS AS THE HP SITE ITSELF?

  THANK YOU IN ADVANCE.

  RUSSELL.

  Hi, Russell:

  He has a Ralink WiFi card you find the parts list for your laptop.

  So, this is the driver you need for this card...

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp56942.exe

  HP wireless assistant software is not applicable to your model.  Your model uses the most recent software HP connection manager, which you may need to install in order to activate the wireless card so that the drivers can be installed.

  This package provides the connection manager HP for the notebook models and operating systems.

  File name: sp54630.exe

  The driver hotkey, you need is this one...

  This package contains the Quick Launch software HP, which allows the special function keys on the laptop to program models. For example, the software of HP Quick Launch allows users to press the Fn + ESC keys to view system information. This software works with supported operating systems.

  File name: sp56929.exe

  So that the brightness keys work, you must install the graphics driver first.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp54988.exe

• Bought a new hard drive and installed Windows 7. I then installed the old hard drive XP in a different machine and now I am told to reactivate Windows XP.

  Bought a new hard drive and installed win 7 to him to replace my old hd in xp. I then installed the old hd in xp to replace a system running under win2k, but I was prompted to save it. can I use the old license key that accompanies the xp or should I get a new license?

  original title: Win2K to XP

  Registration and "Activation" are two different things, registration is not required, the activation is and if the road that has XP on it done from another computer and a "Retail" version, then you will need to activate by phone using your existing product key.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Console of r. used to fix the MBR, now dirve says "New Volume"

  OK, I'm having a big problem.

  I'll start by saying that my computer a few days ago has only been running a configuration to multibooting with linux on a disk and Windows XP on another. Linux using Grub to boot. Now, I recently updated my BIOS and this had caused a problem with GRUB not start XP properly. I decided to remove the Linux disk, simply launch XP as my main drive and physically switch the two when I need to use one or the other.

  Given that I was removing Linux, I had to fix the MBR for Windows would be to start properly. I read online that all I had to do was start using my XP installation disk in the recovery console and doing a FIXMBR and FIXBOOT. I did it, but something went wrong and he said that I had to do a CHKDSK first. So I made "CHKDSK/r" and let stand overnight (this disc is 1. 5 t so it took a while).  So the next day after work I went back to finish the FIXMBR and FIXBOOT. He gave me the same message. Now I know exactly what I did after that, if I tried other commands or what, but I finally decided to just hang up and see what was going on.

  In Linux, I see that the name of volume for my XP disc went from "XP 1. 5 t"to"new Volume ". Not good. Now I see there are two files listed: RECYCLER and System Volume Information. I guess that the disk has been reformatted somehow? Now I'm at the point where I use my XP Backup to another drive of four months ago. I did some research on the recovery partition, file recovery, etc. I came across a program (trial version) that finds deleted files. I installed and run for a few minutes. OK, good news, is that I do not see some of my files and folders, so I guess that the disk was not completely formatted/overwritten.

  I don't know how the player got there where she is now. Maybe I used a bad command or a switch?

  So my question is where to go from here? Should I get a new drive and recover the files on the new disk? Can I restore files and recover the old partition?

  I hope I didn't confuse you too much. I appreciate any help you can give.

  -Jimmy

  Hey Jimmy,

  I personally never heard a user successfully remove the GRUB bootloader without a reinstall of Windows. You have no real solution is to reinstall Windows from the Windows partition is completely empty. I don't know any Linux file recovery tools, you may need to post in a Linux forum for Linux file recovery tools.

  Sorry I don't have a better solution for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to reduce the volume of an audio clip in CC animate to HTML5 output?

  I'm working on a presentation of 2 minutes in CC to animate. There is a voiceover track and a piece of background music, both playing for the entire animation sequence. I'm trying to reduce the level of the volume of the music track that the voice-over track is the center of attention. Unfortunately, when you select the piece of music, the Edit function is grey on in the Properties window.

  I tried to change the original music track in GarageBand, reduce the overall volume, but when imported into the document, Animate, the volume level seems to be the same as the way it replaced.

  What are the options I have to reduce the volume of the music track?

  When you import H.264 then animate on top of it, the video does not get exported. You must use something like the first to combine animation with video exported.

  For sound, look in the publication settings and adjust sound on Raw, stereo 16-bit, 44.1 KHz for the flow and the sound event.

  The noise is in the timeline of your movie, or is he played with the code? If you do anything with the code, worked for how long the entire animation will take in seconds and use it as the length of the export. If it's only the scenario animation, select the option to forward last image.

  Try a shorter export, to see if its exports ok.

  Once you have your video ready for YouTube, take the file in Adobe Media Encoder and use a high quality H.264 preset and upload this new file.

  Put this in a box 1 layer to improve the quality of the video:

  internship. Quality = "best";

• Prime Minister 14 new items cannot be installed error U44M1I210 updated.

  I want to just communicate with someone! How do I correct/get around that? First elements 14 said it was a new update I downloaded, but it could not install on Windows 7. Now, he just asks me to install and instantly fails.

  I can not fire the Prime Minister and I just bought it and impossible to contact that anyone to fix it. So now, I go through my computer in the meantime someone maybe sometimes back to me somewhere in another time zone. Or not. What total rubbish is Adobe. Why I just cant send a question. None of this is my fault, I just pay for it.

  See here:

  (Yes, it says creative cloud, but it applies to Photoshop Elements, too):

  Error U44M1I210 when installing the Adobe Creative cloud updates or Creative Suite 6

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.