Impossible to run concurrent jobs in EBS 12.1.3

Similar Questions

• two loop running concurrently, but double length

  Hi guys,.

  I try to read at the same time both ion Chamber. IC0 IC1 reading and reading have a loop of each.

  These two Subvi can run concurrently, but by the time the cost doubled again.

  Why?

  Thank you very much!

  

  Hi guys,.

  Thanks for your reply.

  I found the problem. I put the delay between write and read the com see the following figure. The timer was implemented with Resp.vi of IC101. After I moved out, my code can work well. It's the job

• How to manually run the job scheduler

  I wanted to know how to run a job scheduler manually. My requirement is to reschedule some jobs if I want to run it manually so that their execution for the day is over and I can put the new time. For example. to reprogram a job, we can use the following command:

  () DBMS_SCHEDULER.set_attribute

  name = > 'CLUSTERPLANNINGREPORTS_JOB ',.

  attribute = > "repeat_interval"

  value = > ' freq = daily; BYHOUR = 16; BYMINUTE = 0; BYSECOND = 0 ;') ;

  Similarly, I wanted to run the task from the Scheduler.

  I hope that my request is clear.

  Please get back with the answer to my query.

  Concerning

  BEGIN
  DBMS_SCHEDULER.run_job (job_name => 'USERNAME.JOB_NAME');
  END;
  /
  

• Poor Oracle Performance consistency running concurrent queries

  We have 600 million records in the cache must be retrieved on queries (filter or Multi Extractor, we tried both), but we are faced with poor performance when we increase concurrency, we use 5 son of job by node Manager representing a total of 300 sons, we are not able to get a rate higher than 400 records/s (that is, each node consistency to recover 6 records/s) It would take too long (nearly 20 days) to 600 M of process records. This means that consistent performance are poor until the database.

  The improvements that we tried:

  We have created the index (index simple and compound), implemented from POF, tunned shuts down the JVM to reduce the GC, configured network communication (doesn't any sense cause we run everything on the same machine, but we tried), increased coherence nets, implemented best practices and after all, we tried to run on Exalogic , and after all, we had the same problem.

  The material on our tests, we used:

  -Dell R910 with 1 TB of Ram and 80 processors;

  -Oracle Exalogic X 3.

  Each node consistency is using 16 GB of Ram, and we use a distributed Cache.

  Before dropping out of coherence I would like to know if there is something more, we can try.

  We opened the SR and after many tests, that we abandoned consistency, we changed the technology, and now the Solution works well. We understood that the consistency is just for the cache and not for intensive query.

• Impossible to run the restore has successfully completed.

  I would like to restore on computer to the point before a few recent updates.  It runs very slow now.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems with the system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon

  Mick Murphy - Microsoft partner

• Impossible to run the installer for HP officejet 4500 G510 install on Windows 7 Home Premium SP1 Toshiba Satellite. Any ideas how to fix?

  Setup running on the HP disc will not work.  No error message, stops just until it loads the installation program.

  I downloaded the site Installer Internet HP (versions complete and base).  Same results - cannot run the installation program.

  I contacted Toshiba, which says it's a problem of Windows 7, and communicate with Microsoft.

  I installed this printer at least 10 times on some other operating systems without problem.

  I want a wireless printer that prints, scans, and faxes, but impossible to get the installer to run.

  Any ideas on how to solve this problem?

  Hi PCCoachFL,

  Printer HP office jet 4500 G510 is compatible with Windows 7. For more information please visit the link below:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=HP%20officejet%204500%20G510%20&OS=64-bit

  I advise you to install download drivers for the printer HP office jet 4500 G510 and check if it works.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3919446&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3919445

  You can also see the article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• Conclusion running info JOBS

  Hellou,

  Please can someone tell me what is the problem?

  My appeal JOB_TEST_PREPROCESS jobs program and this program in this procedure call procedure, I call this:

  	SELECT rj.log_id IN the dba_scheduler_running_jobs rj l_job_log_id
  	WHERE rj.job_name = i_job_name
  	AND rj.owner = i_job_owner;

  When I run the present:

  BEGIN

  dbms_scheduler.drop_job ('JOB_TEST_PREPROCESS');

  sys.dbms_scheduler.create_job (job_name = > 'JOB_TEST_PREPROCESS',)

  program name = > "PROG_TEST_PREPROCESS"

  = start_date > to_date (null).

  repeat_interval = > ",

  End_date = > to_date (null).

  job_class = > 'DEFAULT_JOB_CLASS ',.

  enabled = > TRUE,

  auto_drop = > false,

  Comments = > ");

  end;

  > > then it will find me my current JOB and everything is OK

  but when I run the present:

  BEGIN

  dbms_scheduler.run_job ('JOB_TEST_PREPROCESS');

  END;

  then my procedure always fail on NO_DATA_FOUN (select isn't running the task because it is not in the dba_scheduler_running_jobs)

  What is the problem.

  Thank you

  Moreover, I even filed a bug for this issue:

  Bug 19185117 : USER_SCHEDULER_RUNNING_JOBS EMPTY IF WORK IS PERFORMED BY RUN_JOB WITH USE_CURRENT_SESSION set to TRUE

  It led to a correction of documentation, but only in 12 c:

  http://docs.Oracle.com/database/121/ARPLS/d_sched.htm#ARPLS72396

  Using of RUN_JOB with use_current_session =TRUE does not update the status of the job and the work does not appear in *_SCHEDULER_RUNNING_JOBS views.

• 23 Firefox makes it impossible to run our product. How to get back to version 22?

  We have a product that uses a java applet to run it. Until the 22nd of Firefox (and all previous versions), the Firefox to work with our product, even when no other browser can't we depend on. We must be able to remove 23 FF and re - install 22 FF. I tried all the recommendations to solve the problem, but nothing works. Our Apple customers are people who are most affected because 6 Safari, Chrome, or Firefox will run our product. Our customers PC can run IE.

  How do I download Firefox 22? I have a copy saved 21 FF for PC Installer, but not for Mac.

  I know that this goes against the advice of Firefox, but I am instructing my company and my customers to disable updates for Firefox until we can use future versions.

  By default, the web pages are limited to loading files in the same directory and subdirectories. To relax this restriction, you can switch a parameter in all: config. This is not new, but in case this setting affects your application in a new way now, do you want to try?

  The subject: config method should work for everything: newtab, but extensions can substitute (and a user.js file it can return to the next boot).

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the file and make a pause so that the list is filtered

  (3) assuming that it is set to its default true, double-click the preference security.fileuri.strict_origin_policy to activate it false.

  Any difference?

• Impossible to run Performance IE FixIt error Code 80004005

  When I run MicrosoftFixit.IEPerformance error Code 80004005

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

• Impossible to run downloaded applications

  I am a novice in computer science.  In the last two days, I tried to free up space to make my system faster, so I deleted some programs, add ons and extensions, thinking that I have no need of them (no list of what I deleted everything}.

  Hi Deanna,

  Use Disk Cleanup tool, my computer-> right click on your drive c-> properties-> disk cleanup to free disk space.

  You can also delete your temporary files in, click on Start-> Run, type & -> % temp %-> ok. You can delete all the files in... wll you not be able to delete some files, since they may be in use.

  Clean your cache of internet explorer, start-> settings-> Control Panel-> options Internet-> delete the browser history.

  What is the application you download and does not run now?

• Impossible to run vbs files

  for some reason I can't run the .vbs without right click files and pressing open with command prompt. y at - it a setting I can change to fix this or what?

  Hello

  The question you have posted is related to the VB Script and will be well suited in the MSDN Community. Click on the link below.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualBasic

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Impossible to run Windows Update, get the 8007370B and 8007371C error code

  I could not update vista windows for many months, I currently have 30 updates update download but unable due to the error of the codes 8007370 B and 8007371 C... Help!

  I think that my computer was infected :(

  Just out of curiosity

  1 - What is the installed security/antivirus suite.

  2 - and what other security software you run, if any?

  3 - is this 'software firewall' the Windows Firewall or a third-party firewall? If the latter, what is the name of this application.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Impossible to run an .exe file or shortcut unless I have run as administrator.

  Hello

  Write to you all today because I recently had a virus on my second computer that is running Windows Vista Ultimate 64-bit edition and after removing Vista Anti Malware 2010, am unable to run .exe files. Initially, Avast Anti Virus caught the ave.exe file and removed from my system to the program had already himself installed and launched several times. I manually deleted some reg keys that it added to my registry and now I have an error after trying to launch any program file or .exe. I might be accidentally deleted a key "reg" I needed. I tried running SFC in the command prompt and couldn't solve my problem, and everything I've read says to restore from a backup, but my computer is fairly new and I still have my backup files ><. this="" is="" the="" error="" message="" i="" receive="" every="" time="" unless="" i="" right="" click="" and="" hit="" run="" as="">

  C:\Program... (header)

  This file does not have a program associated with it for performing this action. Create an association in the set Associations control panel.

  I can't find an option to create an association for any .exe in the set Associations control panel...

  PLEASE HELP ME!

  This is getting very frustrating. Thanks for your time.

  Daric

  Edit: I tried CHKDSK also now...

  Hello

  See the message I posted in the other thread:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/b76d7016-5776-421F-89F7-c6f661c6977d/#67d860dd-2AC1-4BF6-8ED0-b946b65003c2

  Use the methods and this one now:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Impossible to run an application

  original title: "to run this application you must first install one of the following versions of the .NET framework: __v4.0.30319__Contact your application Publisher for instructions about obtaining the appropriate version of the .NET framework."

  Any help? I get following messages appears at Windows startup (Vista Home Prem). Sometimes, this will happen after starting upwards.

  "To run this application you must first install one of the following versions of the .NET framework:
  v4.0.30319
  Contact your application Publisher for instructions about obtaining the appropriate version of the .NET framework.

  I tried to reinstall v.4, but it doesn't matter what. I don't even know the specific trigger for this error or the program. Any help? Thank you!

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable, uninstall (or remove it from startup).  Another option is to solve the problem with this application if it is that you actually use.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

  Hello

  First of all, thank you in advance for any advice for any help, you can offer.

  A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

  I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

  I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

  Hello

  Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

  Let us know how it goes.