Impossible to send software trigger using 6682 and OR sync

Similar Questions

• Are there examples of niScope send software trigger edge

  This is the sub VI:

  

  In my case, PXI-5105 and 6368 are used for the acquisition of synchronization. Post_trig_event and pre_trig_event of data are needed to analyze what analog channel has abnormal evolution. The trig source is not unique, which include several analogue channels. I therefore prefer to use a software to process a lot of data to channel to find the abnormal change and then send a trig signal, which means a trig signal to the PFI or the PXI_Trig. I think that the noScope that send software Trigger Edge works. Can you give me an example of this subroutine VI?

  I've attached an example that uses a software trigger to trigger an acquisition.  The code shows how to use the "niScope Trigger.vi software Send."

  Description of your request, it looks like you want to acquire data continuously and perform a top treatment in LabVIEW to determine when send software trigger.  This can also be done, and I would recommend starting with one of our continuous streaming of examples, like "niScope EX Fetch Forever.vi", which can be found using the example Locator OR under material input and output > Modular Instruments > NOR-SCOPE > Acquisition continues

   

  
  I hope this helps!

  -Nathan

• Is it possible to send a picture using NetStream and NetConnection?

  Would I be able to send an image using NetStream and NetConnection?

  Hi mattbanks82 ,

  I have not actually tried this before, but I think it can work if you can somehow encode the image as a byte array and send it, and then it receives, you can decode the byte array. There is an as part of the AS3 core lib project http://code.google.com/p/as3corelib/ JPEGEncoder class work that can encode a JPEG image in byte array, but I'm not really sure if it will serve your purpose. Maybe you can consult the documentation for the class to see if it suits your purpose. Otherwise you can consider implementing your own encoder.

  Thank you

  Abhishek

• Impossible to editing a program using Revo and Control Panel.

  Download Web Easy Professional installation program.  It has not finished installing.  The program displays in Program Files, but will not work.  Impossible to uninstall using Control Panel uninstall or Revo to re-download the program.

  Hello

   

  1. what operating system is installed on the computer?

  2. is the Web Easy Professional-specific question?

  See the following article:

  The following article gives an option to choose which program to uninstall, choose the Web Easy Professional you and click on uninstall.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Impossible to send recive mail using windows mail

  The "removed" host is not found. Please check that you have entered the server name correctly.
  Account: 'deleted', server: 'deleted', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  This error occurs when I try and send and receive messages. tried to remove the antivrus software but still no luck. all working fine until I did a system restore

  Here's how to set up Windows Mail:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows live ID:0x800CCC0E, 10060 socket error - impossible to send/receive email using Windows Live Mail

  could not send email, now I can't send or receive email.  I contacted my IP to see if it was a problem on their end, and it wasn't. Help, please!

  Looks like you are running in a block of 25 port.

  As a general rule, the owner of port 25 SMTP server you use must be the same as the entity that provides your Internet connection at the moment. To learn more about this issue, see anti-spam

  http://www.postcastserver.com/help/Port_25_Blocking.aspx

   

  The workarounds available when sending abroad are the following:

   

  1. use webmail to send (via your browser).

  2. ask your ISP if they have one port other than '25' for SMTP.

  3. If you use the same connection away from home frequently,

  Replace with the SMTP belonging in this regard. It's a bit

  difficult, but if you want to go this route, I can provide more details.

  4. If you frequently send to multiple locations, get a free Gmail account,

  Configure it to POP access, set up in Windows Mail and use it to

  your shipment of household chores. Gmail uses port 465 for SMTP, which is not blocked

  as port 25 is.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  'Law Gal' wrote in the new message: * e-mail address is removed from the privacy... *

  Here is the error I get.  I'm on a laptop, wireless.  My thing of mail server does not use SSL.

  I can't SEND mail via Windows Live, but I can receive.

  The connection to the server has failed.

  Are subject: Roberts - t/c Nancy Stacy (925) 939-4367'
  Server: 'mail.hsimonsonlaw.com '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.
  Socket error: 10060

  Gary van, MVP (Mail)

• Impossible pictures send normal gmail, messaging LR and with server validation problem coming out?

  Unable to send photos with gmail, the problem of validation of the LR email and outgoing server

  Could attach you a screenshot of the error you get?

  Also did you shoot 2 verification channels and make less secure applications.

• Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Look at: Start-> Default Programs-> set your default programs
  Select: Windows Live Mail

  --
  Karel your [MVP - Windows desktop experience]

• Trying to send a software trigger to 5114

  Greetings to all my friends on the set of the digitizer,

  I try to send a software trigger to my digitizer 5114 in c# .NET.  There is no cable attached to the Commission, there is no signal going.  It works very well with the trigger set to "immediate".  However, I would like to make a trigger of software I test things.  It does not work - when I told FetchByte it crashes with a timeout.

  Here's the basic gist of what I have in my code:

  PrecisionTimeSpan triggerHoldoff = PrecisionTimeSpan.Zero;

  PrecisionTimeSpan triggerDelay = PrecisionTimeSpan.Zero;

  scopeSession.Trigger.ConfigureTriggerSoftware (triggerHoldoff, triggerDelay);

  scopeSession.Measurement.Initiate ();

  scopeSession.Trigger.AdvanceTrigger.SendSoftwareEdgeTrigger ();       Is this good?

  waveformByte = scopeSession.Channels [ChannelName]. Measurement.FetchByte (timeout, 1, waveformByte, out waveformInfo);  This request times out.

  This looks good, or is there another way to set up a trigger of generic software, and then send it to the 5114?  Thanks for any thoughts.

  Kind regards

  Penny

  Penny,

  Thank you for using the API OR-SCOPE of .NET 2.0 so soon after the release!

  In order to respond to your question as to why worked scopeSession.Trigger.ReferenceTrigger.SendSoftwareEdgeTrigger () and scopeSession.Trigger.AdvanceTrigger.SendSoftwareEdgeTrigger ();  not be found in the help topics include file:

  http://zone.NI.com/reference/en-XX/help/370592V-01/digitizers/5122_state_model/

  Your code has expired because he was in a State of pre of sampling, waiting for the trigger for reference.  Once the acquisition is completed, i.e. when (in yellow), he will wait for the trigger of the advance.  The advance trigger is used for multiple acquisitions records and allows you to wait between records.

  This table is also useful because it shows all events that can be exported and triggers that can be imported to your scanner. (and when these triggers can be used).

  I hope that helps!

  -Nathan

• Essbase Trigger Lock SS and send it

  Hello
  
  I need to create a trigger using the Regional service for sending by Spreadsheet Add - In and lock activity. Please guide me in the development of the script, I just can't understand what to put in the where and what condition in the window of the trigger. Impossible to find examples on the net.
  
  Thank you
  Ash

  OK, I was wrong. You can use a trigger on update to capture changes. Think about it, you must create a where and when the clause that would always return true. As
  Where [scenario] .currentmember
  When [scenario] .currentmember <> .currentmember [scenario] + 1

  I suspect that you do not want to use logging to not send an email. This will be rolled forward and after values. I have not tried, but I don't think it captures information on who did it. That's why I'd the ssaudit road. 11.1.1 you have transaction logging.

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT &amp; T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• What is the best software to improve performance and free hard disk cleanup. I used MacKeeper, but I'm tired of paying annual fees for this service.

  What is the best software to improve performance and free hard drive cleanup? I used MacKeeper, but I'm tired of paying annual fees for this service.

  You shouldn't have these software.  See discussion of Klaus1

  Do not install MacKeeper

  See also this one by Klaus1

  Viruses, Trojans, Malware - and other aspects of Internet Security

• Can send you pictures by using Skype and iphone 4S?

  Can send you pictures by using Skype and iphone 4S? If so, how? Thank you

  I di as described above and it worked. The only difference is that I should select more info for sending the photo. Thanks S.P - translation!