Impossible to send recive mail using windows mail

Similar Questions

• Windows live ID:0x800CCC0E, 10060 socket error - impossible to send/receive email using Windows Live Mail

  could not send email, now I can't send or receive email.  I contacted my IP to see if it was a problem on their end, and it wasn't. Help, please!

  Looks like you are running in a block of 25 port.

  As a general rule, the owner of port 25 SMTP server you use must be the same as the entity that provides your Internet connection at the moment. To learn more about this issue, see anti-spam

  http://www.postcastserver.com/help/Port_25_Blocking.aspx

   

  The workarounds available when sending abroad are the following:

   

  1. use webmail to send (via your browser).

  2. ask your ISP if they have one port other than '25' for SMTP.

  3. If you use the same connection away from home frequently,

  Replace with the SMTP belonging in this regard. It's a bit

  difficult, but if you want to go this route, I can provide more details.

  4. If you frequently send to multiple locations, get a free Gmail account,

  Configure it to POP access, set up in Windows Mail and use it to

  your shipment of household chores. Gmail uses port 465 for SMTP, which is not blocked

  as port 25 is.

   

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  'Law Gal' wrote in the new message: * e-mail address is removed from the privacy... *

  Here is the error I get.  I'm on a laptop, wireless.  My thing of mail server does not use SSL.

  I can't SEND mail via Windows Live, but I can receive.

  The connection to the server has failed.

  Are subject: Roberts - t/c Nancy Stacy (925) 939-4367'
  Server: 'mail.hsimonsonlaw.com '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.
  Socket error: 10060

  Gary van, MVP (Mail)

• Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

  Why, when I send an email using windows mail (RoadRunner ISP) sometimes it does not transmit the image that are in the original.

  Some messages are not complying with the standards of the Internet and the images do not show before their delivery.  You can overcome this by transmitting the message as an attachment instead, and then the images will be intact.

  Steve

• Impossible to send E-mail on Satellite A100 WinXP SP2

  Hi all

  just found this forum.
  I have the Satellite A100 Windows XP sp2 and I'm unable to send e-mail to certain addresses (yahoo among others - recipients rejected by the server).
  After several long sessions with my ISP tech (ntlworld) support that seemed to be the best advice that all is OK with my settings on the server and I need to look for a solution elsewhere.

  I was using Outlook Express as my email application so tried Mozilla's Thunderbird to see if this helped - no improvement, unfortunately.
  Windows updates all installed. I approach approaching the limit of my knowledge, help/advice or pointers in the right direction is greatly appreciated.

  Hello

  Maybe is a problem of the Outlook profile.

  Make a new profile in Outlook under Extras? E account Mail with information from the ISP and verify the Netware properties.

  I hope this is a help.

  By

• Impossible to send e-mail password is incorrect?

  Hi people,

  Recently I get this error when I try to send an e-mail with one of Mr. addresses I can check and receive e-mail at the address, but when I send a mail on my iPhone I get error.

  I have the same address put in place on my iPad and have no problem in sending or receiving emails.

  I rechecked and the password is correctly entered.

  Any suggestion would be appreciated.

  This happens on my iPhone 6

  Hello Jasdelta,

  Thank you for using communities Support from Apple. I know have a problem with the email on your iPhone just, it's not what you expect. As I understand it, you can't send email on your iPhone and your iPad allows to send and receive e-mails with the same account. Since that narrows down your problem on your iPhone, I suggest you reboot your iPhone, like closing down and starting process is important to keep the iPhone software works correctly:

  Restart your iPhone, iPad or iPod touch

  Then follow the steps in this article to troubleshoot and fix your emails on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• Sending pictures to option is grayed out. How to send the picture using Windows Photo Gallery?

  Original title: Gallery

  I would like to know how to send an image to a file open. When I choose "" send to "this option is"greyed out"."

  Do you use "Windows Photo Gallery" of Vista, or a third party library?  ' Send to ' is not normally associated with the images of the Windows Photo Gallery in Vista?

  Photos from the photo gallery Windows send to Flash memory
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/thread/60055083-019c-44e0-b5d4-ba0640bd4522

• Unable to send an email using Windows 8 mail application

  Original title: Outlook.com with BTinternet email compatibility

  I have Windows 8.1 and try to use the Outlook webmail to send and receive emails from my btinternet account. I can receive but not send emails. I checked and rechecked the settings for incoming and outgoing messages, and all are defined by BT for use with webmail. Messages sent from my btinternet address returned by postmaster at Hotmail after several hours and after receiving a notice of delay

  Hi Bob,

  As you cannot send an e-mail using webmail on Internet Explorer, as well as the issue might be with BT server.

  To check if the problem is really with the Windows 8 mail application, I suggest you add another email and see if you are facing difficulties during use.

  Get back to us if you need further assistance.

  Thank you.

• Impossible to send e-mail on yahoo when I use the firefox browser

  I am not able to send email when I'm logged into yahoo on the firefox browser. When I click on send, nothing happens. If I use IE, it sends. Please notify. Thank you

  URL of affected sites

  http://mail.Yahoo.com

  Just a hunch. Try to disable the ZoneAlarm toolbar extension and see if you can send an email through Yahoo.

• 0x800CCC0F error code is trying to send an email using Windows Live Mail

  Apparently not answered my question, even if it is requested - a lot!  Here once again is:

  I can receive but not send mail with Windows Live Mail.  I have a new laptop - less than 1 week, running Windows 7 Home.
  I set up my email accounts exactly the same as in Outlook on my old machine.  I have them set up on my phone without problem as well.  Only it does not work with Windows Live Mail.

  I have McAfee Firewall and Virus Checker - which I disabled it according to other positions.  Not good, it won't send.  No matter what I do, this is the error:

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Server: - hidden for obvious reasons.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Can anyone help?

  1. If you do not include the full error message, no one can help. Reveal your server won't cause problems.
  2. The issue could not have been answered that it is not the right forum for WLMail. Experts are found here.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Impossible to send e-mails through Hotmail to Outlook Express

  Original title: "Email from outlook Express 6, do not know how?

  I have an outlook Express 6 to send emails from, but don't understand how to use the thing. And used my email via hotmail, until last night when I finally got a call saying that Hotmail was not sending my emails at all! I was so frustrated to learn this and as you can imagine, angry with all the work that went into it. Now, everything is all wrong for me once again, I might as well the text the person I'm trying to achieve, and then I know that my email goes out!

  I have a missing child, and I need to know how to do this as quickly as possible! Now, I have an additional problem, I am very sick and need surjury after 6 October this month following an entry. And I'm already very worried about things. Please, y at - it someone who may eventually walk me through the steps of obtaining my express working properly? Also the charterer that I try their best to help me by saying that I am a * address email is removed from the privacy * and a * address email is removed from the privacy *, does that mean? >

  Hello

  • Try Outlook express installation using the hotmail account?

  See the articles below and check if it helps.

  How to set up Outlook Express

  http://support.Microsoft.com/kb/2409264

  Importing items into Outlook Express

  http://support.Microsoft.com/kb/2398794

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  http://support.Microsoft.com/kb/813514

• Impossible to send e-mail, Live mail error ox800CCC0e

  I can receive but not send email in Live Mail.  I get the Live Mail error 0x800CCC0e and socket 10013 error code.  My ISP is Comcast and I can send and receive to Comcast.net.  I contacted Comcast and they say that all is well in respect to my connections and referred me to Microsoft.  Any help or advice would be greatly appreciated.

  I contacted Comcast and they say that everything is fine regarding my connections...

  Did also tell you that your settings were outdated and give you good?

  It is difficult to be certain of your problem without seeing the full error message, but a reasoned guess says that you are still using port 25 for SMTP even if Comcast not have support for at least a year. Right-click on the account name in the folders pane, and then select Properties. On the servers tab, select my server requires authentication. On the Advanced tab, change the port to 587 outgoing mail server.

  Delete all messages waiting for the Outbox (below the records of account in the folders pane), then dial a new test message with a single topic and send it to yourself. Post a new message in your response.

• Impossible to send e-mails, they are rejected with Postmaster failed message

  I HAVE A PERSISTENT PROBLEM PASS MY E.MAILS. THEY ARE NOT ACCEPTED AND THEY RETURNED WITH A POSTMASTER HAS NO MESSAGE.

  * original title - REJECTION OF the ENVOY E.MAILS. *.

  This does not mean that the message has been rejected, it means that the email address you tried to send that there was.

  Check your spelling, make sure shift caps lock is turned off just to be sure and see if you still get the message from the postmaster.

  If you get one more time, it could you copy and paste everything in the message from the administrator (but take anything as the subject line of the email that you have sent to your privacy)

• Impossible to send software trigger using 6682 and OR sync

  I can't send a trigger of global software to the PXI (PXI_Trig0) trigger using the PXI-6682 card and the software of synchronization OR (beta 3.0 and 3.1). I ran the example vi: route software Trigger.vi and chosen my 6682 and terminal of destination PXI_Trig0 resources. I get the error:-1074118606 was held at niSync Connect Software Trigger.vi, driver status: (Hex 0xBFFA4032) the terminal specified source is not valid for this operation. Looking at the terminal of the source, it is selected as the GlobalSoftwareTrigger. If this card does not support a software trigger (I can't imagine why), if not, how can I send a software inside of basket PXI trigger trigger?

  Any help would be great.

  Josh

  I found this one. Apparently the PXI-6682 card cannot do a software trigger, so I plugged internally PFI2 to PXI_Trig0, then an event of installation time (down, up, down) on PFI2. Time event fires a trigger on PFI2 that triggers a trigger on the backplane PXI PXI_Trig0. I will then put up to fire all stars fires instead of PXI_Trig0 to synchronize my two FPGAS.

• Impossible to listen to music using Windows Media Player 12.

  Original title: Media Player 12

  After the extraction of a lot of lp to media player. All he's trying to do is rip music. Even when I put it just plays the cd.  When you try to view pictures in Windows Media Player. It plays all my music. And some how my folder will now appear in my music catorgory. And I can't move my folder of this place. Also when it says it's updated media licenses. He says its doing to the public the music that someone has suggestions. I did a sfc. And all the files are ok

  Guest63

  Hello

  We would like to know more details from you for help you with this problem.

  (1) what happens when you try to move your folder?

  (2) what version of the Windows operating system you have installed on your computer?

  (3) have signed to your computer as an administrator user?

  I suggest you follow the steps below according to the operating system on your computer. You might face this problem that any library created is damaged or if they are protected by DRM. Follow the steps below.

  Windows 8:

  Launch Windows Media Player convenience store Setting.

  Please follow the steps below to run this utility for troubleshooting.

  (a) key Windows + W keys on your desk.

  (b) write the Troubleshooting in the search box in the upper right.

  (c) select the Troubleshooting option after the search.

  (d) select the show all option.

  (e) select the setting of Windows Media Player.

  (f) click Next to perform the resolution of problems and follow the steps.

  Launch Windows Media Player troubleshooting utility library.

  Please follow the steps below to run this utility for troubleshooting.

  (a) key Windows + W keys on your desk.

  (b) write the Troubleshooting in the search box in the upper right.

  (c) select the Troubleshooting option after the search.

  (d) select the show all option.

  (e) select the Windows Media Player library.

  (f) click Next to perform the resolution of problems and follow the steps.

  Windows 7:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Alternatively, you can follow the steps below.

  The Player Windows Media DRM: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Media-Player-DRM-frequently-asked-questions

  Write us with the asked details and the status of the issue.

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---