Impossible to set up the Infrastructure life cycle Manager

Similar Questions

• Router WRT54GS, how to set up the infrastructure mode.

  Hello

  I'm new in this forum.  I have been using this router for many years.  I have two desktop computers and a laptop computer, the first two connected by cable, wireless laptop.  I got a lcd tv got a (wireless) lan connector and want to access the internet with my TV as well.  The manual of the TV says that he accepts the router mode infrrastructure and no ad-hoc.  According to me, the first time that I have configured the router was punctual and now I want to change to the infrastructure.   I've looked everywhere and many people say to go to set up the wizard provided in the cd of the router but I did and I don't see the option to select the option at all.  Could someone help me to find a way to fix it?  I'd really appreciate it.

  Thank you guys for your help.  Tonight, I tried several times until it worked.  No idea, but it works now.  Case is closed.  Thanks again.

• Printers Multifunction LaserJet 1536dnf impossible to set up the network in Lion scanning

  Hello

  I'm trying to configure ethernet scanning using my Laserjet 1536dnf. I am able to set up the network in Lion scanning. I was able to do in Snow Leopard. Can someone help me? It would be much appreciated. Thank you

  Hello

  If you have previously installed software, be sure to remove it using the option of the scrubber:

  * Please note that the following steps will delete all HP software installed.

  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Once done, download and install the full functionality of Lion software:

  http://FTP.HP.com/pub/softlib/software12/COL41268/IM-100565-1/HP_Lion_LJ_SW_v12.13.26.dmg

  Make sure to install any update HP available by clicking the Apple icon, then software update

• Impossible to set up the account on the mail application

  I am new to windows 8 and I try to use the app mail mail calendars people trio apart, and am pretty dead on the use rather than other applications. My problem is that my phone is apple so I have an email from icloud I want to put in the icloud app is not available as a type of email, so I select the other option and then select the IMAP type but I can't connect to the server. Please tell me if its possible to add it to the app! I got it to connect with outlook, so I think it should work with this app as well. Help, please! :)

  Hello Megan,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Do you receive an error message or a code when you say, 'I can't it to connect to the server?

  Thank you for details on the issue.

  This behavior can occur if the app files or settings are corrupt or missing.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter app and then try to set up the e-mail account. This tool can automatically identify and fix problems with applications and the Windows store.
  See this link:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If this does not help, use method 2.

  Method 2:
  Please refer to this article and check if it helps.
  Reference:
  Messaging app for Windows
  http://Windows.Microsoft.com/en-us/Windows-8/mail-app-tutorial

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• BlackBerry 10. impossible to set up the email on Z10

  Hi guys and girls

  Someone at - it the same problem.

  I tried to configure my POP3 for 3 days and now good luck e-mail address.

  I have checked and rechecked my

  Displays the settings and my smtp, port and SSL settings and other impossible settings connected to my e-mail address.

  Also gives me a message saying that my provider seems to not be trust worthy?

  I use the same settings in Outlook 2007 and connects to the email without any problem.

  Is there a problem with Z10 POP function?

  Or?

  I found the problem

  If your POP3 and SMTP does not use the good name of user and password this cuase it does not

  So my problem is that I was that the phone automatically adds the POP3 username for the SMTP Protocol. where the service provider I use do not need that in order to post the causes of the problem

  Example of

  pop setting incoming

  Username: [email protected]

  password: * & * & * & *.

  incomeing mail server: pop3.mail.co.za

  disabled port 110 (ssl)

  (Since im using Vodacom in South Africa)

  Courses

  User name: (blank)

  password: (blank)

  Outbound: smpt.vodamail.co.za

  Port: 25 (encryption smtp disabled)

  and I took the settings.

  Thanks for the help,

• WAP321 captive portal - impossible to set up the guest network connection

  Hello community.

  I use two WAP321 with the latest Firmware (1.0.6.2) in a cluster.

  Both are connected to a switch SG300-10 (FW: 1.4.1.3) in Mode of L3.

  The switch is connected to a router RV130 (FW: 1.0.2.7).

  The router has Inter-VLAN-routing active and static routes for my VLANS configured.

  To one of the Interfaces of the router is a connected DNS/DHCP server that manages the resolution of names and the dynamic distribution of IP4 for my network.

  In my network, I have different VLAN for customers, management, server, test and the WLAN clients.

  So far so good.

  I have install on the WAP321 cluster, an intern (VAP0) and a guest WLAN (VAP1) using the Setup Wizard.

  Delivery of DHCP and DNS lookups are ok for two wireless LANs.

  Settings WAP VLAN and IP4 address are:

  -untagged VLAN: enabled

  -untagged VLAN ID: e.g. 3

  -Management VLAN ID: the same without tag VLAN ID

  -IPv4 parameters are static in the ip range of the VLAN untagged

  -DNS server are set to manual for a server in VLAN 4 and to 8.8.8.8

  My problem is that I can connect to the WLAN comments but I never get the captive portal login screen.

  The First-Instance Association captive portal is set to VAP1.

  The Configuration of the Instance in captivity 'Vérification' is located in the local.

  A group and users are configured.

  The customer obtain an IP address in the host IP address range VLAN and can search names and IPS, e.g. www.cisco.com.

  If I try to open a Web site, and then I get the message that the server did not respond.

  Impatience on your part.

  Best regards

  Rainer.

  That's great. I'm glad to hear that.

  Eric Moyers

• Impossible to set up the Apple ID to download applications.

  Separated from this thread.

  This has nothing to do w my email! its on my iphone5c, I can not id apple setup properly to download apps, im tired of this game, Mickey mouse and am willing to change to another provider/carrier :-(

  Hello

  You can try the steps listed in one of the links below or contact Apple Support for assistance.

  https://support.Apple.com/en-us/HT204316

  http://www.Apple.com/icloud/Setup/

• Turers and phony Life Cycle Manager

  Hi guys. I am just in the middle of download the virtual appliance for LCM and then its coming down I thought I would post just to see if I could check a number of things.

  I saw some demos showing some of the cool features in the LMC and how it contributes to they control the deployment of virtual machines in an environment and has nice features rear load, although is it for existing virtual machines can I want to audit an existing with narrations of hundreds, yes hundreds of VMS environment?

  Any information would be appreciated.

  Thank you.

  Yes, you can import existing virtual machines.  Look in the Administration section.  You can import virtual machines as well as all the virtual machines in a folder or a pool of resources.  You can designate an owner, associate values of criteria, set a retirement date and capture the historical cost of installation and ongoing monthly maintenance costs.

  Enjoy.

• Issue life cycle management tutorial

  I'm a newb with planning and Essbase. Asked me to help a project. I read the tutorial of LCM since I wanted to migrate our PRD to DEV. This seems to be a fairly common problem. We have no calculation of the Manager or EMP architect installed since we're on Solaris. We have done everything with classic. The tutorial reference EPM as necessary to migrate the application planning and dimensions and Bishop Calc for Bishop of computing artifacts. We have a windows server running Planning Server reports. Should I install EMP and Calc Manager on that server, because it needs Windows or y at - it another way to migrate to our DEV environment. If I should install EMP and Calc Mgr I just place the files with other zippers download V*.zip and run the installer? Thanks for any help you can provide.

  You need not have EPMA and/or Calc for LCM Manager.

  Just follow the steps in this link http://www.oracle.com/technetwork/middleware/performance-management/tutorials/pln-lcm-obe-095602.html

  See you soon,.
  Abhishek

  P.S. Looking at your message again, I believe that you got confused between EMP and EPMA :)

  Published by: Abhishek Sep 20, 2011 11:34

• Get-MCpl / global platform, the mapping card Life Cycle

  Hello
  
  is there a any correlation between the response of get-MCpl and definitions of Cycle Global Platform car Live?
  
  I had a get-MCpl output:
  ------
  cm > get-MCpl
  = > 80 CA 9F 7F 00...
  (usec 12102)
  < = 9F 7F 2 a 47 90 50 40 47 91 81 02 31 00 83 58 00... * G.P@G... 1.X.
  11 68 91 45 81 48 12 83 65 00 00 00 00 01 2F 31. h.E.H.. e... / 1
  30 31 31 36 38 00 00 00 00 00 00 00 00 90 00 01168...
  Status: No error
  Manufacturer of IC: 4790
  IC Type: 5040
  The operating system ID: 4791
  Operating system release date: 8102 (11.4.2008)
  Version of operating system level: 3100
  Date of manufacture of IC: 8358 (23.12.2008)
  IC serial number: 00116891
  Identifier of the IC package: 4581
  Module IC manufacturer: 4812
  Module IC Packaging Date: 8365 (30.12.2008)
  Manufacturer of CCI: 0000
  IC incorporation Date: 0000
  IC Pre-Personalizer: 012F
  IC Pre-personally. Date equipment: 3130 (10.5.2003)
  IC Pre-personally. Hardware ID: 31313638
  IC Personalizer: 0000
  IC customization Date: 0000
  IC personally. Hardware ID: 00000000
  -------
  
  Somehow check in what GP card Live Cycle is my card?
  
  See you soon,.
  Max

  Hello

  It doesn't tell you the card life cycle State.

  If your card has too many authentication attempts has failed it will END.

  GP 2.1.1:

  The State FINISHED signals the end of the Cycle of life and the map card. The passage of the State by another State to TERMINATED is irreversible. In the FINISHED State, all APDU commands must travel to the issuer security domain and the issuer security domain must only meet the GET DATA command.

  You can try any other than GET DATA command, which must be authorized without a secure channel to see if the map is completed.

  See you soon,.
  Shane

  Published by: safarmer on 07/11/2011 13:08

• OfficeJet life cycles

  Someone has an idea, what would be the total life cycle for the series officejet 7110 or 7100.  In other words how pages you might think that this printer is able to produce during its life cycle.

  The rule I use is to multiply the maximum nominal cycle of the warranty period.  For the Officejet 7110, there would be 5000 pages per month x 12 months, or 60K.

• Life cycle Workbench project AIA vs REL

  Hello
  Is it possible to use Oracle referential Enterprice instead of life cycle project AIA workbench for actions such as the creation of BOMs, etc.
  
  concerning
  Philippe

  Hello

  OER is used for the purposes of the SOA governance in a large company where several services are integrated to form a central repository.

  Whereas the project life-cycle Workbench (PLW) is a tool developed to design time and deployment time repository in order to facilitate a common deployment for all of the product plan.

  Bill of materials (BOM) generation is dependent on the harvest your composite to PLW and harvest in turn depends on a complete annotation of composites. Yes, the harvest may be made to OER as well but the sound used for SOA governance, not the generation of BOM.

  Generation of BOM details are extracted from DB of the lifecycle and BOMs are generated. BOM can only be generated with Project life cycle Workbench.

  I hope this help you.

  Kind regards
  Rahul

• Missing items on the Infrastructure tab, signed as a full administrator

  I look at if logged in as configurationadmin, I can see everything.  When I import a user 'AD', I assign a tenant admin, Iaas Admin, then go to the user and grant all.  I don't see all of the elements on the infrastructure tab.  Managed computers is a.

  Has anyone seen this?

  • Here is a screenshot, the left is me logged as 'domain account', with full perms
  • The picture on the right is from configurationadmin

  

  Full administration

  (1) give tenant admin

  (2) grant Iaas admin

  (3) fabric of grant admin (this is what I missed.

  rights 'full admin' How - to's.

• The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

  Hi all

  I have seen under error in the tool main 2.2 Cisco infrastructure

  The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

  Could you please suggest how we can solve your problem.

  Thanks in advance...

  Kind regards

  Sachin

  Yes. Life cycle license are by smart device managed. See this page for a good overview:

  http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

  .. as well as this page:

  http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

  .. who States:

  Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

  A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

  When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

  We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

• You have to have a license of the life cycle, but also licensed insurance with premium

  I first 2.1 and I'm trying to see what I need to use licenses.  When you enable Netflow on a device, I see where he uses an insurance license.  My question is, should I also use a license of the life cycle?

  Thanks in advance.

  Hi joseph,

  You must purchase licenses of access to the features of the first Infrastructure and insurance licenses to access the features of insurance in the first Infrastructure lifecycle. Each license also controls the number of devices, you can manage using these features.

  If you have installed the first Infrastructure for the first time, you can access the features of the cycle of life and insurance management using the built-in evaluation license. The default trial license is valid for 60 days and a maximum of 100 units. Send a request to [email protected] / * / if:

  You need to extend the evaluation period.
  You need increase the device-County line.
  Already, you have a special license and must assess other feature licenses.

  Hope this answer your question.