Black screen during the launch of Apple Diagnostics

Similar Questions

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• black screen during the initial installation of windows 7

  Hello. I currently have Windows Vista Home basic preinstalled on my laptop

  I am trying to install windows 7 ultimate.
  I inserted the disc, rebooted and pressed F2 and choose to boot from the disk
  After that, I get just a black screen with an underscore flashing in the upper left corner, and it seems that its not really do something
  I ran the Upgrade Advisor and he said that I would be able to install windows 7
  I have SiS Mirage 3 graphics and sound to date
  Can you tell me what to do
  What is on the disk, it is possible that the disc is damaged?

  Hello

  What is the brand and model of the computer.

  I suggest you to consult the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/black-screen-with-cursor-during-install/68eb0062-9493-4A3F-8a01-3bfc85dc7b3c

• I need help for Windows Vista black screen during the connection, even with the login screen removed

  Hey, I have a problem in Windows Vista:

  I've been updating / updated my graphics card and it is the graphics card, I'm updating, after a while, a black screen will appear (PITCH BLACK) and I there is no cursor and I tried Ctrl + Alt + Delete, but nothing seems to work, after I turned off my laptop, starts to load then it was the new dark night! (NO LOGIN SCREEN). Then I turned off my laptop then I constantly pressed f8, then I pressed "Computer repair" then it loads then my screen showed "Another user", then I clicked it then I had to type my ID but I have no details of connection, I pressed on enter with no connection details, but this still does not work because I had to type in my login information. I tried everything, then I went to safe mode and fact a password and changed my admin account type, then I rebooted my laptop, then I have constantly pressed f8 and pressed "Computer repair" then it loads and then my screen showed 'Another user' again... .
  
  PLEASE I NEED HELP! I WANT TO PLAY MY GAMES!

  Hello

  Follow the steps below:

   

  Method 1: Do the Startup Repair to fix the problem.

  See the following article for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

   

  Method 2: Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Let us know if that helps.

• Black screen during the call I phone 6 more

  BBlack screen while on a call to the phone I 6 more

  The screen is supposed to close during a call. As soon as you press it against your ear, the proximity sensor is turning off screen, in order to avoid "plays the numbering" or similar effects.

  If the screen is not active as soon as you lift the phone to your ear, check if the proximity on the top of the screen sensor is not covered by a protective film or the case, if you use one.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by resetting, but it can cure a few glitches.

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the phone works again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If this still does not work after that, get the phone checked for hardware problems by visiting an Apple store or Apple authorized service next to your site provider.

  Or contact the Apple Support to send it.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Black screen during the connection (Vista) very well in safe mode...

  OK, so yesterday I run my registry any clean my computer was fine... when I turned on it today it says windows had not been turned off correctly and to check for errors... I looked at this process as I always do, as it is rare for this to happen. I noticed that he began scanning of files obtained in about 8000-9000 and began to repeat the sweep of 8000-9000 repeatidly files as if stuck. All of a sudden he jumped past and began to say something on the amendment of security for these files or something (I'm not completely computer literate so I did not understand what he was saying). Ive read about 1000 pages on the internet and they are able to get the Task Manager in regular mode (which I can't) or used a malware FVIIland been fine... Im stuck about what should my computer for Friday run applications of uni and I'm all that hair out as I'm going bald and I shaved my head yesterday... Help, please.

  Thanks in advance for the answers,

  Jahsus.

  The game, January 13, 2011 12:06:36 + 0000, Jahsus wrote:

  OK, so yesterday I run my registry clean my computer was fine

  You run a registry cleaner a week? You play with fire. You
  should never run it.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

  I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

  Force the restart: press the lock and home buttons until the Apple logo appears again.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• iPhone 6 alternating between the black screen and the Apple logo and nothing else

  my iPhone 6 alternates between a black screen and the Apple logo, what do I do?

  Hi Nathanielfromwa,

  If your iPhone 6 alternates between black screens and the Apple logo, this could be a problem that can be fixed by wiping your iPhone to factory settings. If this is the case, save your iPhone first. I've included links if you need help with backing up your iPhone, but also to reset to the factory settings.

  How to back up your device using iCloud or iTunes - Apple Support

  Erase content and settings on your iPhone, iPad, iPod touch or Apple Watch - Apple Support

  I hope this helps, and if you have more questions, do not hesitate to ask!

• Black screen when I launch the Satellite A100-773

  Hello

  I don't know what is happening
  If I press the 'POWER' button at startup, I got BLACK SCREEN all the time,
  If the screen is defekt? or what else can we?
  the lobe of the HDD to burn?

  It verifies the DVD-ROM and the CAPS LOCK, and another lobe burn upward, as allways standart!
  but after that if I hit the ' CAPS LOCK ' button it don't burn.

  * edit1 *.
  If I press the key "FN" for more function, the lobe burn, but I can do it only for a few seconds, then there reakt custom more

  thx for the help...

  It is difficult to tell if it s a defective GPU or the internal laptop display.
  You can try to connect an external monitor to the laptop to check if something appears on the second monitor.

  If you see any picture or anything else so I guess that the graphics card is dead.
  This could be the case value because the GPU is fixed on the Board and that's why the whole motherboard replacement would be necessary.

  Seems you have to reach a point of service authorized in your country for the control of the laptop and the diagnosis of the error.

  If the warranty is valid everything should be done for free!

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• IdeaPad 500 - a black screen during Normal labor

  IdeaPad 500 - a black screen during Normal labor

  My 500 Ideapad is a month old. After a few days with her, I saw that in the middle of my normal work (Word, Excel, ETC...) My screen turn Black and will never go back. Only with the black screen reboot goes normal again.

  What should I do here?

  Thank you

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• Intermittently, he goes down with a black screen provides the following information: Boot from CD

  I have a Dell Inspiron 530 running with Windows Vista.  Intermittently, he falls down with a black screen provides the following information:

  Boot from CD

  Client MAC addr: 00 ID 09 88 CE 06

  GUID FFFFFFFF FFFF FFFF FFFF FFFFFFFFFFFF DHCP *.

  PXE - E53: no boot file received

  PXE - M0F leaving Intel Boot Agent

  No available boot device - retype press to try

  To the point where I have indicated the asterisk above, it has a slash which rotates in a circular motion.

  My thought is that it's either the Windows code is corrupted or is a hardware failure.  While I am not positive, I feel that it occurs when Internet Explorer is used.   System Restore is not enabled on this computer, so this isn't an option.  Can someone help me understand this means and how I could fix this?  I know that will later Windows version can solve it, but this isn't the answer I'm looking for.  Thank you

  Attempt to initialize the network is not a 'possible', it is certain that your PC is doing exactly this depending on your BIOS settings. In addition, she tries the network initialization after already trying to start on an optical disc. The two attempts at device boot doesn't have, in all likelihood after having already failed the boot from the hard drive. There is no message to indicate than an attempt to boot to the hard drive, or he leaves the screen too fast to see you or you did not save it in your original post.

  My advice on the diagnosis is based on the studied the real model of your PC, not generic advice for all Dell PC with Vista installed.

  1. Your computer has already finished POST (Power O n Self TEST) otherwise you wouldn't see any attempt to start at all.
  2. You've already provided specific error messages.
  3. I have already advised the best and most approriate diagnostics for your PC.
  4. Your PC will not start in any mode if it becomes a default 'hard', rather than the intermittent fault means your original message. Start in any mode, you can and make a backup as soon as possible.
  5. Unless these recent changes include adjustments to the BIOS settings, they are irrelevant, that he is a boot failure which can be caused by anything done under Vista.
  6. Removing the external devices is never a bad step of troubleshooting if you encounter problems. I doubt it will help in this instance, but it will not hurt to try, especially if they are peripheral bootable.
  7. Startup Repair will not solve a hardware problem (by far the most likley scenario).
  8. System Restore is not usable unless you can actually start to Vista and it's never going to treat problems of material.
  9. IMO, this is not a software issue. See also point 4.
  10. If you have a hard drive failure, it is not recommended to try to reinstall the operating system. First of all prove that the hard drive is OK as advised before trying to re-setup. In addition, if you can, back up your data before reinstalling the operating system. In all likelihood, that's what you have to do but for a hard drive replacement.

  I repeat that a failing or failed hard drive is the most likely scenario. Other more distant possibilities include

  • A failed or failing disk controller (almost certainly on the motherboard)
  • Boot from the hard drive is disabled in the BIOS (highly unlikely if this anomaly is intermittent)
  • Some sort of weird for the failure of the BIOS
  • Option 3 mentioned in the previous post (unlikely unless your PC has been internally inspected/modified or subject to vibration displacement/hitting more/remove etc..)

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.