Impossible to use NIC (Etherent controller does not recognize) on VMachine

Similar Questions

• Used to boot Windows - does not recognize the hard drive

  Hello. I had my computer laptop vostro dell for 5 years, and I've never had a problem. A few weeks ago, I was starting, and I got the blue screen of death. I had the same thing when I rebooted. I bought a SATA dock for recover my files, so I could format it and start from scratch. However, the dock does not detect my HARD drive, although I hear the disc running. I tried to connect a Dell Latitude docking station to transfer the files, but the Latitude does not recognize my HDD ether. Vostro runs XP Home Edition and Zorin OS, Latitude anime XP Pro. HHD in question is a 120 GB Western Digital Scorpio for drinking devices. Help, please.

  You boot from the disk and choose "Try without Unbuntu and change to your computer"?. Honestly, it looks that you have installed. In addition, using raid with Windows Xp support?

  If you have chosen to 'Try' Unbuntu I recommend now you run chkdsk /r from the recovery console. The problem is not with the hard drive probably, but with the file system.

  Download WIndows Xp Recovery Console from HERE. Save the file to your desktop. You will need to burn the iso image to a blank cd using the same way you did to the image ISO of Unbuntu ImgBurn. Although the instructions below refer to a Windows disk, the disk from the Recovery Console that you create will do the same.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• I use an application that does not recognize the DC Acrobat Reader version as a PDF Viewer is valid.  How can I download the older version XI?

  I looked in all directions, and even those who SAY they are for XI download DC.  And QuickBooks does not work with DC.

  Here: ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/

• I have a hp compaq dc5800, that is used. The pc does not recognize the network interface card.

  I reinstalled win xp pro. When finished and restared the nic card was recognized that even if the lights are on when I joined cable ethernet an atheist. I installed the drivers but nothing has worked. Why this is happening and what can do? Thanks in advance.

  You are the very welcome.

  You have the small factor form (SFF) or convertible minitower (CMT)?

  Electrical supplies and the form factor of the audio and video cards must be flat with low profile brackets if you have a LTS. Power supply power is also less than a SFF in a CMT.

  I have a dc7800 CMT. I installed a very nice video fanless AMD Radeon 6570 1 GB card in mine and I love it.

  I have installed a sound card, but I guess you could do it.

  I don't know how that everything affects the audio settings in the BIOS.

  Most video cards are the HDMI audio chips on board, and those disable the integrated audio system. He must therefore go back into the BIOS and enable the onboard audio setting.

  It's so everyone guess what happens when you add a new sound card. It neutralizes the again integrated audio system (which would be nice in this case), it neutralizes the HDMI audio (not a problem if you never Hang PC via an HDMI cable)?

  In any case, if you want a sound card, you can get a card PCI or PCIe one that there is a PCIe location in the dc7800.

  If you have a Mini PC, I would not recommend add both a video card and audio, because that can overload the 240W P/S.

  Paul

• Hello, I just pay for membership on the creative cloud adobe but when I download Muse I still can't use it because it does not recognize my membership.

  

  I really don't understand what is the problem. I restarted my computer, tried logging on and outside. I also tried to buy the creative cloud again, but he urged that I already have a subscription. So now I'm stuck and cannot open/use Muse?

  I guess you two have two different issues.

  @kylianw, you have a muse subscription indicated in your account?

  @jrd, you have a subscription to lr/ps are unable to use lr and ps, correct?

  so, if your two accounts show the subscriptions that are not reflected in your desktop cc application after the release, then using the same adobe id used to confirm your account, you

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• When I try to back up my computer using windows 7, it does not recognize the dvd in the player as a removable device. I had windows vista Home premium sp1 without any problem. I have compaq presario sr-5610f

  Compaq presario sr5610f

  How is your question about the Windows Update feature? Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I just upgraded to logic 10.2.4 and now it does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. Any suggestions?

  I just upgraded to logic 10.2.4 (and 10.11.16) and El Capitan now logical does not recognize my controller - Yamaha P-95. Yamaha has no new drivers yet. RELOADED drivers available and tried different USB ports. The audio works fine. Any suggestions?

  you need to ask Yamaha if they have a work-around or they intend to release the pilots, have a beta driver or what is their recommendation.

  If the logic is compatible with the operating system then the problem is with the 3rd party controller, and the developer will have to answer it. Past that if you have a backup time machine an instance where worked together your controller, the software and the operating system you can restore to that point

  Use Time Machine to back up or restore your Mac - Apple Support

• Ethernet controller does not work on the Satellite L645D-S4030

  Basically, I got my windows 7 reinstalled on my laptop due to virus... Now I have a problem with the Ethernet controller does not, I checked my device manager and there is a kind of yellow dash through the icon... Someone knows what is the problem and how can I solve this problem?

  BTW, I have a SATELLITE L645D-S4030

  Hey Buddy,

  Hmm generally if you reinstall Toshiba Recovery disk Windows all drivers will be installed too because the disc contains a picture of the factory settings.
  Or you used another drive?

  Yellow exclamation mark can mean that there is a driver problem and so it would be advisable to reinstall the LAN driver. Follow the link Timox. After the driver is installed, restart your computer and check again in Device Manager. The yellow exclamation point should normally be gone.

• PlayStation 3 Sixaxies Controller does not work

  Hello I am looking for a fix for this problem, I have a perferctly good controller and a new computer windows 7 64 bit and I would like to know why the controller does not work please help thanks

  Are you sure Sony support the controller on a PC?  If you are just using a pilot implemented by a guy then it probably won't work on 64-bit.

  My advice, pick up a wired Xbox 360 controller.  Windows Update uses drivers and it will install immediately.  If you want to go wireless, you can use a wireless controller with the USB Gaming receiver for Windows. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• XPS 400 video controller does not

  I have a XPS 400 desktop computer that runs currently the 10 Insider Preview Windows operating system and its video controller does not work and so he struggles to play YouTube videos and he is totally unable to play games should be able to play. I once had this computer to run an operating system called Linux Mint and the video controller worked fine until I put Windows 10 on it. In Device Manager the video controller appears under other devices with an exclamation point. I tried to have the search system automatically updates of pilot, but he can't find. In the past I thought that the video controller was that of an AMD processor, but I don't remember why. Recently I watched the original specifications and it comes with an NVIDIA GEFORCE 6800, so I'm not sure she has and this computer has done to my knowledge undergo updates before I owned it but I don't know if its video controller has been changed. Nevertheless, I tried to get help thinking it is an AMD but nothing helps and I tried to download the drivers from NVIDIA but it still does not work as there is very little information on the video controller. Does anyone know a way I could get the video controller to work?

  10 Windows will have to use vista old drivers for video cards of vacuum tube.  XPS 400/Dimension 9150 can run windows etc. 8 or 10.

  Old cards Nvidia cannot use the latest drivers.

  the 340 series is the last version supporting older cards.

  NVIDIA has officially END END of SUPPORT LIFE in April 2016.
  http://www.nvidia.com/download/driverResults.aspx/77224/en-us

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/3473/~/EOL-Windows-driver-support-for-legacy-products

  But 64-bit versions of windows 8.1, 10 will require Pentium D 915 or higher with the radiator of the performance of copper.

  DirectX June 2010 is required to submit the drivers of DX10, which is what vista uses.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8109

  You download and extract in a folder and run DXSETUP. EXE as administrator.

  After that you will need to go into Control Panel, in programs and features add functionality to windows and re enable legacy live show.

  Then install of Chrome.

  http://www.Google.com/chrome/EULA.html?system=true&standalone=1

  Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

  Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  

  Description	Supported OS	Download
  ATI TVT2 Wonder Elite - unique analog NTSC TV Tuner internal, v.8.33.7.1, A00 (v64) Latest driver for the MCE Vista 64 bit for ATI TV WONDER ELITEmore details	Windows Vista 64-bit
  ATI TVT2 Wonder Elite - unique analog NTSC TV Tuner internal, v.8.33.7.1, A00 (v32)

  
  Latest driver for the MCE Vista 32bits for ATI TV WONDER ELITEmore details Windows Vista 32-bit ATI 256 MB RADEON X 850 XT Platinum Edition, Hyper memory PCI-Express X 16 (DVI/VGA/TV out) Radeon X 300 SE 128 MB Radeon X 600 SE, RADEON® X 600 256 MB HYPERMEMORY, 256 MB Radeon X 600, Radeon X1900XTX 512 MB, X 1300 Pro 256 MB, X 1300, X 1300 Pro, dual 512 MB Radeon X1950XTX Crossfire, v.8.332 - 070108 a 1-041388 C - Dell, A01
  64 bit Vista WHQL 8.332 driver from ATI. More details Windows Vista 64-bit ATI 256 MB RADEON X 850 XT Platinum Edition, Hyper memory PCI-Express X 16 (DVI/VGA/TV out) Radeon X 300 SE 128 MB Radeon X 600 SE, RADEON® X 600 256 MB HYPERMEMORY, 256 MB Radeon X 600, Radeon X1900XTX 512 MB, X 1300 Pro 256 MB, X 1300, X 1300 Pro, dual 512 MB Radeon X1950XTX Crossfire, v.8.332 - 070108 a 1-041385 C - Dell - Vista32, A01
  8,332 32 bit Vista WHQL driver. More details Windows Vista 32-bit ATI Radeon X1900XTX 512 MB, v.8.31.100-061024a-039652C-Dell-32Bit-Vista, A01
  32 bit Vista driver 8.31.100 driver for UHMGA14. More details Windows Vista 32-bit ATI Radeon X1900XTX 512 MB, v.8.31.100-061024a-039729C-Dell-64Bit-Vista, A01
  64 bit Vista driver 8.31.100 driver for Radeon X1900XTX 512 MB graphics card. More details Windows Vista 64-bit AGEIA PhysX adapter, v.2.6.2 (plant), A04
  AGEIA PhysX driver updated to take in charge the XPS 710 platform. Adds support for the latest games that use the card AGEIA PhysX and Novodex engine. More details Windows Vista 32-bit
  Windows Vista 64-bit
  Windows XP x 64
  Windows XP ATI Wonder Elite TVT2 - unique analog NTSC TV Tuner internal, v.8.273, A06
  Latest version of the driver for ATI TV WONDER ELITE. More details Windows Vista 64-bit
  Windows XP
  Windows Vista 32-bit

• Wireless controller does not work, said the controller is not an installed device

  My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
  It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
  I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

  Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

  But you will need to know if its Atheros QMI or Foxconn.

  If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

  Or if you want I could have a glance with teamviewer.

  You'll see what I'm doing. If you get it give me the ID and password, it gives you

  Or if you have Skype, my Skype name is the same name I use here

• WIN Pro 8, xbox 360, z axis wireless controller does not

  WIN Pro 8, Microsoft Xbox 360 wireless controller, z axis does not.

  Axis Z work in the calibration screen, but not in the test screen or in the games must be a driver problem, advice?

  Have deleted the driver to allow windows to reinstall the drivers.

  Installing the windows driver software 7 for the controller, still the z axis only work in the calibration screen.

  I thought that I had the same problem, but see the knowledge base article: http://support.microsoft.com/kb/2757006

  Apparently, the problem is only with the test itself dialog box. I also jumped to the conclusion that it must be a driver problem and expects the controller does not work properly in games.

  However, the controller DOESN'T seem to work properly in games.

  (Mine is actually a Logitech F710, but it uses Xinput anyway).

  I hope that your Z axis controller also works outside of the test application, and the information above helps dispel the confusion around this issue.

  There is no problem with the drivers or controller, everything works (read below for the explanation and solution)

  I had the same problem, with the z axis (Left Trigger (LT) and right trigger (RT)) with a 360 wireless controller by using the adapter on Windows 8 Pro 64-bit wireless controller.

  He would not show the entrances to trigger (z axis) on the calibration screen. Looked online and came across this thread in hopes of finding new update of drivers, or a solution.

  After reading the post I quoted above, I decided to see if the z axis works in the game, and he does. I tried Street Fighter X Tekken, went to training mode and you can view entries button on the screen, and pressing the RT and LT trigger buttons, they are part of the game and my character not the corresponding move associated with the key as well as to show the button based directly on the screen.

  I went then the game controller settings in windows 8 and again once the game controller dialog box does not show the LT and RT (z axis) entered.

  Solution: the controller works fine, and not showing is not the z axis is only a cosmetic problem with the Controller dialog box. So just ignore the controller, the z axis dialog box still works in games.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.