Similar Questions

• PS and LR produce bad impressions, but other programs are not...

  It's a little long, because I did a bit of investigation, but I can't solve my problem and I need help:

  I had a nice workflow that I have used for years.  I'm sure that many of you would find a bit tedious and I will not go into the details of it, but the important part is that I always printed on Photoshop (Extended CS6 - now at 13.0.3 - Yes, I have the window trial stupid bug, but that's another matter).  My monitors are profiled (no printer profile custom, but I have downloaded profiles suitable PixelGenius for times where I need them, and with my management of colors, my impressions were quite specific.)  I use and Epson Stylus Photo R2880 and I was very happy with it.  I work mainly on an iMac 24 "(millésime 2009)."  Recently, I decided to change my work flow based entirely on some of the tutorial videos that I bought of LL.  I decided that I was ready to integrate much more LR in the workflow, especially now that he understands the proofing.  Due to the new workflow I was really looking forward to printing off LR.  Who should you get more or less current.

  So far, I haven't printed with my new workflow and I would say that I haven't printed anything since 13.0.1 on PS and LR 4.1 (not that I was printing from LR at the time).  Having not printed in a while, I knew that I needed a head cleaning (of course I did) and, as is my habit, once the head was clean, I printed (from LR) a 4 x 6 image I had planned on printing to a larger size.  It collects all persistent grime after a cleaning.  Printing doesn't look just right for me (too dark and the colors were a bit wide).  I met with wrong colors prints once before, and it turned to be a driver problem.  In the process, I found a large image that is indicative of a certain type of problem and I keep the good and bad prints of hand... just in case.  I decided to print this picture, and of course, it came out looking like the standard version craptastic I was getting into with the bad long time driver.  Just to check that it had to do with my new process, I printed the picture of the PS (which worked fine the last time I printed this image). Also, it came out all wrong (the same as LR all wrong).  Since the bad impressions looked like the old 'bad driver' impressions, I thought I knew what was going on and worked with Epson to reset my printing pipeline and reinstall my printers (I also have a workforce of 845 for printing "throw" and for my wife to use).

  With new installs for my printers in place I went ahead and printed again... and once again, it came to pass badly.  I was, to say the least, discouraged.  As a last test of consistency, I loaded the image up in Nikon Capture NX2 (version 2.3.1) and did a print using the same color profile.  All of a sudden feel perfect.  It is my 'good' old prints and, equally important, was a Dead Ringer for the image on the screen. At this point, I guess that for some reason any LR and PS not correctly color managed.  I thought they were ignoring my selection of color profile and let the printer manage printing from the native color space (ProPhoto RGB) or.  To test this, I set up printing in PS (same image), but took a very strange color profile (Nikon DBase for v3.0.0.3002 of the NAVE).  It's odd how radically a color profile that I could find (the colors are mapped to completely different areas).  I was hoping that printing would be unchanged, but unfortunately he is out with the weird mapping that provides this profile.  It is so drastic a change, I have a hard time assessing whether it is 'off', as the other impressions are.  What is apparent is that PS at least (I have not tried in LR), it's actually reproducing along the pipeline of printing color information.  This does not explain why LR and PS of 'bad' impressions but not Nikon Capture.  This is where I am.  Apparently the color management is broken in my Adobe products, but works very well in my Nikon software.  I'm a bit of a loss. I'm sure I'm printing off LR and especially PS, correctly to 99.999999999%.  Anyone have any ideas?  I'd like to be able to print again. Impression of Capture NX2 is really not a good option.

  Thanks in advance,

  David

  Just to close it entirely, I just got the phone with Epson and they confirmed that if you have PS or LR color management, EVERYTHING must disengage in the printer including the option of 16-bit driver.  You will always get 16-bit printing via the PS color management.  Apparently the option "Off (no correction color)" and the 16-bit box operate independently of the driver and if one is on there as a conflict with a managed utility printing color.  I just wanted that along.

  Thanks again for all the help,

  Dave

• Meta keywords, description Head tags

  Hi all

  If anyone can identify the difference between the head tags and how best to use them to improve SEO:

  Meta

  Description

  Keywords

  And is there a difference between the description and the title of a page?

  Thanks in advance

  S

  If anyone can identify the difference between the head tags and how best to use them to improve SEO:

  Meta

  Description

  Keywords

  And is there a difference between the description and the title of a page?

  Yes, there is.

  Meta Description = a short sentence (Word 8-15) on the page and what it contains.  Google uses the your page title and meta description in the search results pages so it's the first impression people have of your site.

  Meta Keywords are ignored by search engines.  If adding them to your bookmarks you sleep better at night, very well.  But it will have no impact on your ranking.

  The most important is the content of your

  ,

  ,

  and

  Tags.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• monitor the iMac 27 grips 2011 TR spegne meta

  Da few week ago it monitor del mio iMac 27 grips (meta 2011) if spegne come in questo video.
  Ho tried AHT my non riesco a farlo partire. PREMO D d led computer my dopo circa 30 secondi in cui remains schermata bianca if starts usually.
  Rate Cosa Può if?

  FA questo lavoro a tutti?

  Bootup tenendo CMD + R, o it looping option / alt by the d dalla partition di ripristino e utilizzare utility Disco da li disco he riparare, quindi su Ripara years.

• My default size for printing the letter, but it retains the impression as if a parameter is set to 8X6.75. How can I fix it?

  Firefox has recently updated to 40.0.2. Just back from a week off the coast of the work to discover, it was the incorrect impression. The printer is said to add 8X6.75 paper to print. Firefox settings are defined on 11X8.5 and all other browsers are printing very well.

  If Firefox does not use the entire sheet of paper, it can result from after having extracted Windows incorrect paper size settings when reading data from the print driver. Compensation it may involve conclusions some mask parameters, but here goes:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste print and make a pause so that the list is filtered

  (3) for each parameter of the problem printer, right click and reset The fastest way is to click with the mouse and press the r key on the keyboard with your other hand.

  Note: In a few other discussions involving printers Brother, printer_printer_name.print_paper_data preference has been set to 256 and when the user changed it to 1 that solved the problem of paper size. If you see a 256 here, you can change the value by double-clicking it or by using the right click > modify.

  Any improvement?

• Create a table of values for which a condition is met

  I have exactly this problem, however connected solution is no longer valid: Re: table to automatically generate values if the condition is met,

  Basically I have a table (named 'Master Sheet') that has two columns, one with project names with a status ('Active' or 'pending'). I want a separate table that automatically fills the project names of the leaf of the master for which the status is 'Active '.

  For example, from this table:

  Project	Status
  Red	PENDING
  Orange	ASSETS
  Yellow	ASSETS
  Green	ASSETS
  Blue	PENDING

  I want to automatically generate this table, which contains only values whose status is 'Active' (not 'pending' and without values null):

  Project	Status
  Orange	ASSETS
  Yellow	ASSETS
  Green	ASSETS

  Please note that using the filter function does not work in this case, as I need to be able to freely add new lines to the two tables.

  Hi Kath,

  Here is a pair of similar solutions.

  

  That on background uses a writing ('ACTIVE') of the value in the formula in the master-1 table to create the index in column C.

  Above who gets the value of the cell in row 1 (A1) of the table of the single column and lists him only the names of any State were brought to the project.

  Index columns can be hidden.

  Formulas:

  Master: C2 IF (B = C$ 1, ROW (), 999)

  Table 1::A3: IF (SMALL (Master: $C, LINE () −2) = MAX (Master: $C),"", INDEX (Master: $A:$ B, SMALL (Maste r: $C, ROW (−2)), COLUMN ()))

  Master - 1:C2: IF (B = "ACTIVE", ROW (), 999)

  Table 1 - 1:A2: IF (SMALL ("Master-1': C, LINE (−1) ') = MAX ('Master-1': C),' ', index (" Master-1': b, SMA LL('Master-1'::C,ROW()−1),COLUMN()))) ")")

  All forms filled up to the last line of their respective columns.

  Filled with formulas in column A of the table of two columns to right of column B.

  Single column table must be no more than a longer column of its master table.

  Double table column must be as long as his master table or less.

  Kind regards

  Barry

• Battery meter

  My iPhone 6 is running iOS 9.3.1 just today started having a problem with the battery meter records does not correctly. After several hours of using my phone this morning, I noticed that he was always at 100% and he died soon after. It wasn't a problem last night, because I remember watching down to 4% and die last night. I had my time manually rather than what allows it to configure automatically. This http://fortune.com/2016/01/19/battery-issues-iphone-6s-and-6s-plus/ of fortune dot com suggested to do a hard reboot and automatic time setting enable. I restarted, and then activated, then restarted again, but nothing.

  I got the iOS version that I am running for awhile, so I don't think that it has nothing to do with the update because I only started to have a problem with it this morning

  First, download the autonomy since the app store app. It will tell you the status of the battery. Then try the battery meter calibration if the problem is not the battery.

  Recalibrate your battery meter:

  • Charges to 100%
  • Run the battery until the phone turns off
  • If it stops above 1% charge for only one minute, and then continue running the battery down. Repeat until it makes 1% before shutting
  • Load it back to 100%

  If the battery is defective, this should fix it.

• impression on my e mails Thr became very low

  the print is too small to read my emails, it wasn't like that before, when I access my E Mails by aol, the impression is very good, so I think it's a problem with my setting Firefox can you please help me?

  On the keyboard, use Ctrl + 0 (zero) to reset the zoom level for this area.

• How can I make the biggest impression

  How can I make the biggest impression on all Web sites? where is the setting? Thank you!

  To temporarily make more big, click on 'view' in the menu, then choose 'Zoom' & then it will allow you to set the zoom to larger or smaller.

  If you want to definitely bigger, if you have a Mac, click on 'Firefox', then 'Préférences' / If you have Windoze choose 'Tools', then 'Options' (both look the same from here...), then click the "Content" icon and change the font size.

  That should do it...

• What happened to the address bar impressive Firefox? He disappeared as a normal search bar.

  Firefox Win7 desktop. Address bar impressive Firefox disappeared, like a normal search bar. The so-called Delta Search appears on every new tab, that I opened. The only way to reach the sites I knew was to replace Delta address on the address bar, but now that is gone. Each new tab, I opened is monopolized by the search for Delta. There is a short bar that has appeared on the lower line of the header, as well as an ixquick search box which is also new. How to dispose of Delta & ixquick and get the Awesome bar back? I hope someone can help. Alan.

  You have to do an antivirus scan with which I have recommended to you?

• How to reset meter reading in iTunes 12.4?

  After the update, I am unable to reset the account play someone knows a work around or how to reset the meter reading?

  Here's a short AppleScript to replace the missing functionality of time reset. In addition, it erases all jumps, or position of bookmark and the last played and jumped dates.

  Copy and paste into the script editor, save it as LastPlayedNever in ~/Library/iTunes/Scripts. Select one or more tracks and call the script in the scripts menu in iTunes.

  

  -LastPlayedNever - v1. 0 - © Steve Maguire - 2016-05-18

  say application "iTunes."

  If the selection is not {} then

  set mySelection to selection

  Repeat with aTrack in mySelection

  the value played County of aTrack to 0

  the value played date of aTrack to missing value

  the value ignored County of aTrack to 0

  the value ignored date of aTrack to missing value

  If aTrack is bookmarkable then set bookmark of aTrack to 0

  end Repeat

  end if

  end say

  
  

  
  

  TT2

• import bookmarks not so impressive?

  Hi, I was really happy to see that you offer the possibility to import bookmarks droid, but after doing my awesome screen seems not so impressive. It's just an ugly (and unorganized) list of my favorites, that I imported. so it of perhaps a premature question, but will be my awesome screen a great look (with the beautiful miniature and other) more I use the browser? or imported bookmarks will not give their place? did not really see all import issues since most carry on sync. I have firefox on my laptop, but had accumulated bookmarks on my mobile browser that I didn't throw out the window. Thanks for your help!

  Yes, the more you use the browser it will be re-weight ends up your best sites. Bookmarks receive a bonus that is used to promote them.

• Why does not the meter of the quality of one of my choices of master password, regardless how I mix letters, numbers and non-alphanumeriques characters?

  I tried to create a master password, but it couldn't be done because the quality meter never accepted none of my passwords, even if I used a mixture of very complicated letters, numbers and special characters as well.

  There is no requirement when setting master password in Firefox. The password quality indicator is purely informative.

  If you try to fill the bar all the way, that's unlikely, unless you create a long password, or a mixture very complex of special characters, upper and lower case letters and numbers. Don't forget the password should be easy to remember and typed in, time after time. A highly secure password that is easily misspelled or forgotten is of no use.

• The CPU meter on the dysfunctions of transport bar

  At the far right of the Transport bar is a CPU meter. When a project is first opened on LPX, this gauge is the most crazy. It takes about 30 to 60 seconds and sometimes more. During this time, I am unable to play any project - the sound stutters. There is nothing I've been able to do to eliminate (or same gear up) this anomaly.

  (a) what could be the cause?

  (b) how could this problem be solved?

  Thank you

  It's perfectly normal: your content (sampled instruments, inflected tracks, audio files) is loaded into the RAM disk, using all available CPU power. The only thing that you can "do" is less sample content or less flexed titles. Or simply wait 30 to 60 seconds.

  I sometimes play a project that takes over again, but that's useless, the project will stutter and he will miss notes instrumentsa who are not entirely responsible.

  It may also take longer if you have other applications open (webbrowsers) because the contents of the RAM may need to be swapped to and from the disk.

  Opening & downloading a project of average size (with an already high logic) just took me 1'25 "."

  Two more $ to speed up: increase the RAM or use SSD (s) to store your recording and storage of the content of the sample.