Device Manager: nothing is pulling upwards

Similar Questions

• What do you do if your cd/dvd drive does not exist in the Device Manager but always turns upward when you put a disc?

  HI, I lost my cd/dvd drive. It was there before, and when I had a successful previous problem to solve this but not this time. I did the upper and lower bit of regedit but without success. When I picked up this last time I learned to do something with the power reset but can't remember how now.
  I can't even get off the ground with the help of microsoft as cd/dvd players do not appear on my device manager.
  I use a portable Pavilion of HP9000 with a play version of Vista that is updated.
  Everything else works fine but just not drive.

  Hello

  I would like you to follow the steps below and check them off if they help.

  Step 1:

  I suggest to Uninstall third-party software for CD burning temporarily and check if the CD is recognized.

  Step 2:

  I would say that you go to Device Manager,

  a. click on 'View' and 'show hidden devices ',.
  b. once the device is found, click top and "search the hardware changes.

• Printer Spooler, wireless not there, Device Manager see nothing

  just ran updates and now the internet printer are now recognized... went to the Device Manager and it has nothing... of advice how to recover the wireless and printer

  Your message is unclear, but perhaps this can help (although it is intended for installation of post-sp3 problem rather than an "ordinary" Windows Update): http://support.microsoft.com/kb/953979 (also http://support.microsoft.com/kb/953791)

• [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

  Hello

  I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
  I have not installed a new OS or anything recently.
  I have a Dell Inspiron 1545
  Windows 7 Home Premium
  Service Pack 1 (6.1.7601 Build 7601)
  Pentium Dual-Core CPU
  64-bit operating system
  I tried:
  • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
  • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
  • Install drivers in safe mode. I rebooted. No change.
  • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
  • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
  • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
  • Ran Microsoft Fix It I rebooted. No change.
  • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
  • Put on the headphones. Nothing changes.

  I'll probably have to do a fresh install, am I not?
  I would be very grateful if you could help, thanks.
  Jerome

  Right, I fixed it myself.

  So I uninstalled "High Definition Audio Controller".
  But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

  Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

  If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

  If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

• Windows 10 - PC recognize iPad, but iTunes does not. Nothing appears in the Device Manager.

  I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.

  Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• HP G6-1184SA: Bluetooth problem - not installed / display upward in Device Manager - does not at all - HELP!

  Hello

  I just reinstalled windows 7 64 bit on my HP G6-1184SA.

  I managed to get all the other drivers to work from the Drivers HP section on the Web site.

  However I have a problem with drivers Bluetooth.

  • It does not appear in Device Manager.
  • It is obviously not working and I don't even know how I get it to the settings to find/installation/use.
  • I tried all the drivers Bluetooth 4 under my driver on HP product page. (2 of the drivers made me have BSOD and I got in safe mode to remove).

  So basically, I want to get the Bluetooth on my laptop at work - there is no key on the keyboard or button to activate it - but I know there are as I've used it before you reinstall the operating system.

  Please notify.

  Thank you.

  Hello:

  The page on the link below product specification indicates that your laptop does not come with built-in bluetooth.

  If so, this feature would be are indicated as well as the specification of 802.11 wireless connectivity b/g/n.

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1100-notebook-PC-series/5082224/model/5119776/document/c02863651/

  If you still believe without a shadow of a doubt that your laptop came with bluetooth, little matter what the State of the record, then the only suggestion I can offer for you to install the HP software Connection Manager and see if you can turn on the bluetooth car radio using this software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112799-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5119776&sw_lang=&product=5119775

• Windows starts fine, but the Device Manager is empty. nothing else works besides the top of office

  Windows xp sp3-basically a six year old child was playing on the computer. I didn't know that the idea that he did. Looks like he has deleted all devices. There are simply not there. When I click on the drives, it completes. Everythings still on disks. I tried to reboot in safe mode. the computer turns on and off the fine. He can't get WiFi to install if no network. the computer was a prize won my daughter, no disc, but it's all legitimate. his recorded a son-in-law john r.  He has a floppy drive, a dvd burner and cd burner. It is in great shape before this happened. im hoping that this is a simple reboot or something im just missing.

  Hi Cindy,.

  ·         Device Manager is empty?

  ·         You have installed Windows XP Service Pack 3?

  Method 1: Check to see if this article helps you.

  None of the items appear in the device list manager when you open

  Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.

  Microsoft Safety Scanner - free online tool for PC health and safety

• Bluescreen when usb2 drive attivated, no error reported upward on Device Manager. Drive works __OK on usb1 ports. Unit worked for 18 months without any problem

  Error code = OX0000050, pilot?

  Hi comsecflyplan,

  · Provide us the full error code with error message.

  · What is the service pack installed?

  Try the methods and check the results below:

  Method 1:

  Run the patch from the link below: hardware devices do not work or are not detected in Windows:http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Remove and reinstall all USB controllers:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

  Link for reference: advanced troubleshooting tips for General USB for Windows XP problems:http://support.microsoft.com/kb/310575

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Drivers on Device Manager say they are up to date but I'm getting reports that my network cards not upward to date and my NVIDIA and other drivers? especially from NVidia

  my machine continues to say my drivers is not up-to-date, but when I try to update in the Device Manager it claims they are confused? How can I ypdate my drivers for free I just paid so far my OS for win 7

  sincerelly,

  setcrosss1

  If you have a finder driver installed, uninstall it. Very often, they find the correct manufacturer drivers but only suitable for revisions to material beyond the stuff in your own computer.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Removed usb drivers Device Manager

  Hello

  I had a problem with the USB and Firewire connections on my HP XW8400 PC.  The system works under windows xp pro.  The problem I had was that some devices/readers etc were not noticed when I plugged the different Slots USB or firewire and others have been.  I have a dongle usb constantly on my system to run a publishing package that I use on a daily basis... I also have an attached Firewire/USB PCI card.  I use the rear firewire and slots of the editing software and hard drives USB and USB slots front is where I keep my dongle and I use the usb port and firewire for other devices such as readers, usk sticks, cameras etc etc.  As I say, things work well, other custom.  For those who don't to correctly connect the peripheral material Add Wizard would come upward, I press on to connect to the web to search for and then it they'd material device wzard found no drivers/solution/whatever.  Being that it is my main computer to work I didn't want to risk anything and so have put up with him for a long time.  However, these days, I need to get a camera connected to the said work stations and so made test after trying to install the software to factory for the camera via camera software CD and realizing that he did not always work.  I used Malware Bytes and it came with nothing and then AGV antivirus and it came wirth nothing.  Ok... So I thought that it MUST be something to do with the USB (and Firewire) themselves.

  I searched on google and it brought me to this microsoft support page: http://support.microsoft.com/kb/310575 I read through it and he said how to uninstall and re-install the usb via Device Manager drivers.  I went through the instructions and I have clicked on each of the usb devices in Device Manager and uninstalled.  Then I restarted my computer and when it said that it had detected new hardware everytime I clicked on the Hardware Wizard it now impossible to connect to the internet because one of the devices was my router to wide band.  GREAT!

  So, I spent half a day to find the original Windows CD and I reflected on the drive, but couldn't find anything to do with the USB drivers.

  I tried the last known good configuration and that was obviously after deleting files of drivers said Ihad closed and restarted a couple of times since then.

  I checked the system restore and that has been cut!

  If someone could please tell me how to install the said USB controller to ensure that I get the USB drivers installed?

  I'm guessing I now need to go through the window / each device and find the software CD and add the drivers, but I don't even know if I have half of the Conference on disarmament, or they just instantly connect via XP.  I certainly can't find anything for my router, which means I can't even on the web.

  And why has my material wizerd for usb and firewire devices summer miss me for so long?

  All advice appreciated.

  PS... Microsoft, don't you think not that 1 - it would be wise to let people know on the above mentioned page remove the usb drivers may well turn off your Internet so that the wizard doesn't work and you can visit his profile when you connect.  If she had said that I would never be deleted.  2. due to some software I use (Avid Media Composer) on the specially designed workstation, there are various conflicts that occur when the upgrade to Service Pack 3, so you stop the real users of microsoft products to have access to your DIFFICULTY IT thingymajig if they decide to stay on service pack 2.  Why make life so hard Micfrosoft?  I'm very careful with my systems.  I should have a choice of not having to be upgraded if it means he can endanger other packages, but I'll always freedom of basic set of tools and services that you offer.  I'm fed up.   The following, that I get computer is a MAC!

  You're right, that Windows XP has drivers for a large number of features built into the operating system.  Peripheral USB in particular are supposed to be 'plug and play' - you simply connect the device to the computer, it goes "Bong", and the device is recognized and installed.

  A "Repair Installation" window is supposed to leave all your applications and your data intact - but you will almost always see advice to backup everything that you care about the 'just in case '.

  Try posting here: http://social.technet.microsoft.com/Forums/en-us/itproxpsp/threads
  Technet forums are supposed to be for the "professional" so maybe, your message will be seen by someone who has a better knowledge of this issue than most people who post on the forums for answers.

  Items to include in your message:

  • You have XP Pro sp2 (and why)
  • That you have had a hard time to install a camera and so found and followed the instructions in KB310575
  • After you follow the instructions in KB310575, all of your USB devices are reports 1 Code and you are unable to install the drivers
  • Everything that you think is relevant
  • And, more importantly, a link to this topic, so anyone can see what's been tried so far: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/deleted-usb-drivers-device-manager/2272852e-7462-4d65-a8ad-e8162c9eb800#_self

  Good luck and I'm sorry, I could not solve your problem.

• CD/DVD drive no appears in Device Manager and is not opening?

  Hi when I click to open my DVD/CD drive it does not open upward. Or it appears in Device Manager. I unplugged and plugged in I tried to use microsoft fix it. Nothing worked for me.

  Photo of him, not in Device Manager:
  http://i397.Photobucket.com/albums/PP56/nirvanaking95/dvdcddrivenotworking.jpg
  I JUST INSTALL WINDOWS VISTA SINCE WINDOWS 2000 IT HAS WORKED VERY WELL ON THE 2000!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• DVD drive has disappeared from my computer and Device Manager lists

  The machine is an Acer laptop with a single disc DVD - RW Win Vista Home Premium 32 running with all the latest updates installed.

  I have not installed anything new (software or hardware), I know.

  The other day the player just stopped working and is no longer registered to each workstation or in the Device Manager list.

  While they inspected the system event logs there is a chain of...

  Event 7026 - the next (s) starting or starting system could not load:

  CDROM

  and...

  Event 11 atapi - driver detected an error in the controller on \Device\Ide\IdePort2.

  Event 9 atapi - the device, \Device\Ide\IdePort0, did not within the time limit.

  Event 11 atapi - driver has detected an error on \Device\Ide\IdePort0 controller.

  I know that the drive itself works well because when I initially turn on the laptop I can hear the drive spin upward and I'm able to eject the drawer, so there the power etc... but once in Windows the drive does not work or even appear anywhere.

  So far, I have tried.

  1. detection of new hardware in Device Manager

  2 - installing all IDE channels and let the system reinstall after re-booting

  3 running the Microsoft Fixit tool, it seems to point out that there is a problem and said fixed it, but nothing is actually fixed by that

  I noticed a few other posts which look similar to mine, but had trouble understanding if they truly are or not.  So apologies if this is a repeat of something already posted.

  OK tried the fixit tool still once, was not aware there were different tools for different issues.  I have the wrong tool launches the first time round.

  Anyway, the drive is still on holiday somewhere, fixit tool reports that it may not detect the drive at all, so that seems to indicate that he does not drive connected.

  Is it possible that the IDE cable has come off the promenade inside the laptop?  I hope that not because I just spent the last couple of hours trying to figure how to get to where the Player connects, but seems almost impossible... can get to all the rest, keyboard and screen disconnected, RAM, disk HARD etc, but the DVD player, not a hope!

  Looks like I'll take it to a service somewhere I guess.

• No list on Device Manager

  I don't get anything on my Device Manager list. I already tried this:

  1. Click Start, click run, type services.msc and click OK.
  2. Double-click Plug-and-Play.
     
     If you receive a Configuration Manager message, click OK.
  3. In the Startup Type list, click Automatic, and then click OK.
  4. Services nearby.
  5. Restart the computer.

  It didn't work, I don't know any other alternative for this execution. I am trying to install a hp printer all in one and it would not show on the hp Solution Center, obviously its not detected or nothing appears in list manager of devices of all... someone help pls...

  Hi please black_angel, try the following steps. Following are the three different steps to resolve the problem... Please try one of the measures listed. Resolution: Step 1: Article from Microsoft: No. elements appear in the Device Manager list when you open it http://support.microsoft.com/kb/311504 Please note: the URL above will take you to a web site with HP no. HP does not control and is not responsible for information outside the HP Web site. Step 2: Give the patch 107: restore the Manager of devices http://www.kellys-korner-xp.com/regs_edits/devicemanagerrestore.reg please take note: the URL above will take you to a web site with HP no. HP does not control and is not responsible for information outside the HP Web site. Step 3: 1. Go to "Start", "Run" and type "regedt32" 2. Expand the "HKEY_LOCAL_MACHINE" window 3 scroll down to "SYSTEM\CurrentControlSet\Enum" 4. "Enum' selected, click Edit > > menu"permissions. " Note: At this point you will probably notice that there are no permissions on this key. 5. click on 'Add '. 6 Add the group "Everyone" and the user 'SYSTEM '. 7. Select 'All' and check 'Read' ONLY! 8 select 'SYSTEM' and check "full control". 9. click on the button "Advanced" at the bottom of the window. 10. in the Advanced window, check "reset permissions on all child objects...". "11. click 'OK' 12. In the warning window click on 'Yes' 13. HP close REGEDT32 technician

• Satellite A500 - 17 X - Webcam does not appear in Device Manager

  Hello

  I'm looking for more assistance with a recently purchased A500 - 17 X running on Windows 7 64 bit. The Webcam worked when buying, but has suddenly stopped working. Web camera software is up-to-date with the latest download from the Toshiba site, but returns the message at the launch:

  "Web Camera initialization failed" Please, you check the camera device & restart the application or computer.

  I checked the Device Manager under Imaging for webcam devices & is not listed (it's my own laptop; I also have a Toshiba laptop provided by employer & when the webcam is listed on that one, so I presume that it must appear in the same place!

  Does anyone have any suggestions? Would it be a bad connection to the webcam itself, i.e. a warranty issue, or is there a software solution to check if the webcam is actually present? I scan for new hardware & nothing new is detected.

  Thanks in anticipation!

  Jon

  In my opinion, you should try to reinstall the driver for the webcam. Remove preinstalled software, restart your computer and reinstall the latest version available.

  Best test you can do is to reinstall the recovery image. with factory cam settings should work fine again.