Impressions of partial Document on HP all-in-One 7410, 2 Mac Leopard

Similar Questions

• Digitization of Document with Dell All In One Printer A960

  I would like to know the steps to scan a document on a Dell All In One Printer A960.  I have a Windows Vista operating system.

  Here are the steps I take in the manaul.

  1. I put the paper on the glass.

  2. Select the place I want the paper to go.

  3. I then select the Start button.

  4. once I press the button start, he says: it's scanning, without windows or tabs open on my computer screen.

  5. I then go to my control panel and click on the button that says "scanner and camera" to find the document.

  6. I can preview the document once I've selected the button that says "Scanner and camera" on the Control Panel, it takes me to a page where the document is located, the only thing I can do on this page is three things (1) overview of the document, (2) the document Scan or (3) cancel the document., I can't do anything else.

  Step 6 is where I have problems, how can I get the document of the preview of the page area scan to another folder or area such as 'My Document' folder or any other folder, so that I can attach it to an email. There are only buttons "3", (1) a preview button Scan of a button (2) and (3) a Cancel button.

  If I can get the document of the preview in "My Documents folder" area or any other folder I can attach it to an email.

  If anyone knows the steps to get the document in the preview page to scan in 'my account', please list the steps, this is my first time trying to scan a document.

  Thank you

  Hello

  I suggest you to try the steps in the following Microsoft article and check if this may help.

  Scan a document or a file:

  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-a-document-or-file

  If the steps above mentioned article from Microsoft, then it would be better to post the same question in the Dell support forum for assistance.

  Dell Community support: http://en.community.Dell.com/

  For more information, see the following article:

  http://support.Dell.com/support/eDOCS/systems/A960/en/a960en.PDF

  Hope the information is useful.

• Printing problems with Photosmart HP 6520 e-all-in-one on a Mac

  Hello!

  I just successfully saved and connected via WiFi to my new HP Photosmart 6520 e-all-in-one pritner. I even printed the page alignment and test successfully.

  When I tried to print documents in Word, Adobe PDF and TextEdit, the same result occurs each time. The first page that prints a text on my Mac such as:

  %! PS-Adobe - 3.0
  % APL_DSC_Encoding: UTF8
  % APLProducer: (Version 10.8.2 (build 12 c 60)

  And then many many many blank pages start printing after that. WHAT GIVES!

  I use a MacBook Pro with OSX Version 10.8.2 and tried to restart my printer and computer several times without success. Any help with this would be much appreciated!

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• OCR software for F380 all-in-one on OSX Snow Leopard

  Hello, I recently upgraded to OS x 10.6.8 on my iMac and lost the ability to recognize the text when scanning.  Is there a driver or software I can install to find that?  My printer is an all-in-one F380.  I already checked the other posts here, but the last is almost 3 years old.  Thanks for the help!

  Greetings!

  You have downloaded the drivers of full features for OS X 10.6? If not, you can download here.

• HP Officejet 5510 all-in-one drivers for Snow Leopard (10.6)

  Just for you interested in getting the support of driver for HP Officejet 5510 all in one for Mac OS X 10.6 (to add to the growing list by the look of things!)

  I have a HP Officejet 5510, which is (about 5 years) worked flawlessly on Leopard

  Surprised to have just upgraded to discover that it's not supported (should have checked the forums or is it for a)

  Do we have an answer as to whether this printer will be supported?

  Not shown as a printer taken currently supported

  http://support.Apple.com/kb/HT3669#HP

  Apple recommend checking with HP

  Don't really want to buy a new printer (especially since I have a lot of spare ink cartridges - which has probably cost more than the printer.)

  Thank you

  The new drivers Officejet 5510 downloaded from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=219&LC=en&DLC=en&cc=UK&lang=en&product=311255

  Installed and print works now

  Thank you

• HP Deskjet 3055 has all-in-one installation with mac

  just bought the perfect printer for my HP Deskjet 3055 A scanner/printer/photocpier needs and I precisely wanted to that it is wireless. to see that it won't install with MAC OS X 10.7.5... When I insert the instalation disc the message is "operating system is" the installer is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below.

  is it possible for me to get this to work without having to plug?

  Hello

  Constitutes plug in the USB cable, it is necessary to configure the wireless connection.

  Then, download and install the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107372-1&CC=UK&DLC=en&LC=en&OS=219&product=5224271&sw_lang=

  During the install you will be guided to configure the wireless connection, once the client software installation compelte it will inspire you to unplug the USB cable.

  Kind regards

  Shlomi

• hp printer officejet 6700 premium e-all-in-one - h711n and mac 10.8.3

  Apparently, this printer can be installed in a mac than 10.7.

  I couldn't find a driver for a mac 10.8.3. Could someone help me to find or other which option should I

  Nice day!

  You can find the MAC driver at the bottom of the link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=&LC=en&OS=219&product=5058338&sw_lang=

• HP Deskjet 4535: Problem of Hp all-in-One remote printing

  Hello

  I bought a Deskjet 4535 all-in-one last week and there was a problem printing word document using the all-in-one remote application via the iphone.   Impressions of thin paper thorigh the laptop wireless, but when you use the remote, the content document appear to have shrunk - while there were four pages originally, now the output is adapted in three pages, with the smallest font size.   I tried to manual pagebreaks on all four sides, but it still shows the same.  Document has been prined in the dropbox, both laptop & iphone folder.

  Help, please.

  Hey @drappoo,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing from the HP all-in-One remote app on your iPhone to your Deskjet Ink Advantage 4535 e-all-in-one printer. I can help you with that.

  What is happening, that is when printing from your iPhone or iPad, that the camera takes a picture that is displayed on the screen and print it. If things appear smaller so he has to solve is to change the size of the text to a larger size, and then change the zoom on the camera settings. Once you do this, you should be able to print all the greater.

  If you're still not print correctly, by uninstalling and installing the HP ePrint app should help you with that.

  Please let me know the results after following the above. If you are able to print properly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• All-in-one HP Officejet Pro L6580 is skip lines

  With the Test Page to the printer or document page, my all-in-one HP Officejet Pro L6580 is now skip lines.
  * original title - move printer head *.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  and look for a manual too

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• envy23 all-in-one 1075: bad image qulaity with cable TV, display of envy all-in-one

  This computer does not have a HDMI input.  Is that what I can do to improve the quality of television?

  Hello @Heavy,

  I understand that you're looking to improve the quality of your listening on your HP ENVY, 23-1075 all-in-One TV desktop PC. I don't see how you can improve quality without upgrading your graphics as any output you do with your computer via USB and will not as good as what your computer displays currently.

  If you decide to update your graphics card I'm you provide a link to the HP Support document: HP ENVY all-in-One Desktop PC product specifications 23-1075, where you will see the specifications that you must follow for your graphics card for replacement under the heading "Intel Graphics Media Accelerator HD (DX10.1).

  I am also including the HP Support document: addition or replacement of a graphic card HP ENVY 23-1000 All in On MXM series desktop PC, that will guide you in the process of replacing.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Impossible to analyze using Photosmart C4480 all-in-One

  I use the Photosmart C4480 all-in-One on a Mac, 10.6.8.  Impression always worked without problem but digitization has never worked.  Today, I realized that the software provided with the printer is by OS 10.5 (HP Scan Pro always gave me an 'unknown error' popup).  I downloaded version 10.6 on the HP site and installed on the old software.  I opened the new HP Scan, select a profile and press Scan and the program froze and I had to force quit.  I tried several times and it kept happening.  The all-in-one has a screen where you can scan a computer to the unit, and I tried that as well.  The program "Open in Preview" open on my computer, and the screen on the all-in-one read "Scanning" for a short time but then returned to the menu analyze.  Nothing happened on my computer or the scanner.  I decided to uninstall all the HP software and reinstall version 10.6, where crushing the 10.5 version had caused these problems, but after doing so I got the same results scanning HP and analysis on the all-in-one.  Thanks a bunch if you can help!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!

  Finally, download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• All-in-one Officejet J6480: glass J6480 scan fails: "Sorry, an unknown error has occurred." Mac OS 10.5.8

  (Officejet J6480 all-in-One, PowerMac G5, Mac OS 10.5.8, wired ethernet/WLAN) Sweeping the window stopped working and gives message: 'error. Sorry, an unknown error has occurred. "That's all. I can always scan the ScanPro application if I run first of all of the computer, but nothing of glass - i.e. manually, using the buttons on the control panel of the camera itself - to one of the destinations, I tried (PDF preview.), JPEG, HP Photosmart, etc..

  I uninstalled the software suite HP, reinstalled (latest version: 9.7.1), and engaged in the installation process, it has been completed successfully. But no change in behavior.

  I tried the procedure in a similar position:

  Re: Officejet J6480 all-in-One, scanning does not work anymore

  21/02/2010 19:02

  OK, one more not - we will reset the printing system: right click - Sys Prefs, Print & Fax - (control) the area of the print queue and select Reset printing system. -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  .. .but the behavior of my printer has not changed, and the error message is still the same, when I tried to scan from the glass. Any help?

  Hi @jcoronat,

  Welcome to the Forums of HP's Support. I understand that you get an error when you try to scan. I would like to help.

  I took most of these steps from a post of Sunshyn2005. To be honest, all I did is to change the links to software, but the post is enough onsite for troubleshooting of Mac software.

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Trying to network Envy HP 4500 all in one with OSX 10.9.4

  First time installation of HP Envy 4500 all-in-one happening on Mac with os x 10.9.4.  However I can't get the printer to work with cable. HP instructions were re - insert the CD and follow the instructions in the "reconfiguration without cable" However, this was not an option on the CD, he just tried to repeat the installation.
  Configuration of device through my Mac came wit this message-'device unreachable. woreless network settings were downloaded successfully on your device.  However your mac could not locate the device on the network. »

  There is no point of me having the wireless option if it is necessary to have a cable connection.  Please can someone help me with this last step to equip themselves.  Thank you very much.

  Hi thanks for Jamieson, for getting back to me.  We have now resolved the issue - '' We '' being myself and mark of the HP support team.  I tried all methods mention you several times and uninstalled, re-installed updates 3 times on etc. before contacting the forum.
  Finally, we found that the software of the printer was responsible and don't not all parameters.   Mark used Remoting to clear the printer software and start again and now it works a treat.   On the negative side I lost 8 hours of my time, not wanting to not give up the printer when we realize now it was never going to work. On the rise, Mark has been absolutely fantastic to talk me through the process of correction and the end result is a satisfied customer.  I also subscribe to e-print, which will be extremely useful to me in my travels