In any case to control the speed of the fan to Alienware Aurora R4?
In any case to control the speed of the fan in Alienware Aurora R4?
Hello
You are running the latest version of the Bios?
Tags: Dell Products
Similar Questions
-
Satellite C660D - software to control the fan speed?
Just brought a C660D. Someone knows the software to control the fan speed?
My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.
If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.
Hi Polaralbatross,
Have you ever tried the Eco mode that uses the cooling battery optimized method?
-
Satellite P100 - 400 PSPA6A: How can I control the fan speed manually
Good evening
I would like to know how can I manually control the speed of the fan?
I ask this question because my laptop rarely use the fan at a higher speed.Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)Kind regards.
Hello
I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.
If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.
If you are using Vista, then you should check the Vista Power Options:
Check this thread how to manage Windows Vista power management features
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.
-
I won't be here but Microsoft seems very happy sending me on the prosecution of the wild goose, and here I landed! I didn't even know that Microsoft had a band, probably not my music a little... In any case, it is the second shortcut of Microsoft which is supposed to take me to the "Windows 7 Compatibility Center. The first, in the Windows help sent me to http://windows.microsoft.com/en-us/windows/support#1TC=windows-7. Not a mention of the word "compatibility" on the page anywhere. Then, enter 'compatibility' in the search for support and here is the result, looks promising. https://www.microsoft.com/en-us/search/result.aspx?q=compatibility. But no, I click on the first result that says Microsoft compatibility Center. Even what seems to be the correct web address, microsoft.com /compatibility and it takes me here http://www.microsoft.com/microsoft-band/en-us/support/hardware/microsoft-band-system-requirements. I give up!
Hi André,.
Please keep us updated.
Unfortunately, the center of compatibility Windows has actually retired. To find out if any program that works with Windows 10 or not, you can check with the developer to program on the compatibility of its operating system. In addition, when you migrate to Windows 10 from a previous version of Windows, you are informed about programs that may not work with Windows 10. However, you can try to install these programs in compatibility mode and check.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Satellite A200-1SC: which tool controls the fan?
Hello
I'm looking for a program that I can control the fan speed. Because my fan turns on all 10 dry:(sans charge cpu!)
Or someone has a Bios more elders where the fan runs slower? My bios version is 1.70
Hello
I use the FanSpeed on my laptop Toshiba-No.
But I don't think it will work on your A200.
The fan table that is stored in the BIOS controls modules cooling and, therefore, it s unlikely that this tool is running. -
How to control the fan on Portege Z830?
I have a Portege Z830 with BIOS version 1.7 and I am very upset by the noise of the fan.
I was wondering if it is possible to control the fan noise, so I started to experiment with a little utility called SpeedFan. I put in place so that the fan will not turn on until the temperature of the processor exceeds a defined number. But it does not; It seems that the BIOS is ignorant these parameters.So my question is how can I set the fan to work my way?
There are not many options to control the fan.
The fan is controlled by the BIOS. The fan table that is stored in the BIOS contains information how a cooling module must operate.
As mentioned by Liam, you can change the settings of power plant of Win 7 more battery as a way to minimize the performance of fans
This should help a little...In other http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65068 thread, I found a neat trick of the last user... He replaced Z830 fan with the fan of Z930 origin...
It worked. -
DV7 - 3067cl, how to open the case and clean the fan?
Where to find a manual that shows you how to open the case to clean the fan?
Thank you!
Hello
It is not easier to do component, but the procedure is detailed from on Page 94 of your & Maintenance Guide.
Kind regards
DP - K
-
Satellite A100: looking for a software to control the fan speed
Hello
I am looking for software of control/read on my laptop fan speed, because energy does not seem to do anything. It seems not serious if I set the 'method of cooling' to 'Battery optimized' or 'Maximum Performance' or fixed CPU processing speed. I () has installed the Module & Power Saver town a couple of times without success.
SpeedFan & NHC will not work.
Hello
Sorry but I do not share your view on Power saver utility. Do you really believe that Toshiba create tool like that for nothing? Just FYI: public service power saver is not available with Vista operating system and on this forum, you will find topics where people really miss this fun and useful utility.
In any case, it is well known that many tools that you can find on the internet do not have much influence on laptop cooling fan speed. To be honest, something like that can be very dangerous because the majority of users want to have silent notebooks and overheating problems are totally underestimated.
Can you please be a bit more specific about your problem? Your laptop is too strong for you or is the short battery life? Why you are not satisfied with this tool?
-
How can I change or control the fan speeds up my computer?
my processor and motherboard run hot. the fan for processor speed is 20%, the other two are 30%. How to increase the fan speed to lower the temperature?
I would not try to change the speed of the CPU fan. Clean the case out if its full of dust (if it's a desktop computer). If you can put more fans in the case, put more fans in it
-
HP 15 ac110tx: which is the driver to control the fan speed?
I'm a bit confused and don't know exactly the name of the driver that controls the speed of the if laptop fan... .Please let me know the same thing...
Thank you...Hello
No driver but there are few places that control laptop fan speed: BIOS, temperature sensor and software (a lot of portable HP have software called CoolSene)
Kind regards.
-
Control the fan on Satellite Pro 2100
I used to see the analysis of the cpu temp with speedfan, I'd see when the temp (labeled local or remote or temp1, I don't remember.) Maybe 'local').
reached 50 or 50 >, fan went.But I can't find that now. The fan still works ' cos I can activate it with speedfan saying speedfan set to 50% or more, then it lights.
(less than 50% it is not lit, or at low speed - I think a constant - it is inaudible).I would like to know why the fan is not when the temperature reaches 50 > more... When the setting is...
is there a program I can use to do?He finds...
you know toshiba replaces the thing of power management with its own thing in toshiba power saver. Toshiba power saver thing had a framework..."Cooling method.
and
"Intel Speedstep Technology.Each is adjustable to the Performance, or optimized battery or something.
More course set the method of 'performance' of cooling... If you say 'battery optimized' then I think that the processor gets hot enough.
Whereas, for the technology intel speedstep... I do not remember that I put there, but I guess that optimized battery would make the CPU cooler.
However, I noticed when changing the settings of the more advanced page of toshiba power saver setting processor speed to the lowest, it was extremely slow but still an idle at high temperature, about 50 I think, not so much if any difference there.
I think it was less 0 charge, or charge of 0 to 10. I watch the load with notebook hardware control, speedfan and maybe other programs... However, only was necessary.
-
Possibility to control the fan and the temperature under Linux
Hi all.
I suspect that my fan has stopped working. My satellite T110 tends to heat more quickly than in the past. After a brief search, I installed lm-sensors, and leave the settings by default yesterday reported temperature was 54 degrees. Today the same tool report processor temperature of 32 ° C when I went away and 50 ° C now, after 32 minutes. I was not be able to check the fan but as far as I can see the fan does not work. I would be really grateful if someone could tell me.
1. If there is a reliable method to control es Linux pc (or even under windows, I have a system dual boot)
2. What are the possible limits (non-hazardous)
3. what could I do to fix my fan? It is easy to replace?
4. a useful link to get information and support on the subject.Thanks a lot to you all.
jabbbaIs that what you found answers?
As you know Toshiba doesn't support Linux and doesn't offer solutions for this.
In my opinion, you should visit some Linux forum and try to find a solution with Linux experts. -
(Redirected) The R2 of Alienware Aurora upgrade
Hi all
I've had my Alienware Aurora R2 now in 2012 and I was completely happy with it - she has never missed a beat.
I want to upgrade the video card and RAM to deal with some upcoming games.
Current specifications are:
i5 CPU 650 @ 3.2 Ghz
6 GB OF RAM
RADEON HD5670
I'd appreciate some tips on the best compatible card and RAM to buy.
Best regards and thanks,
vs_ursus
Better in this position in the Alienware owners Club Forum, here:
http://en.community.Dell.com/Owners-Club/Alienware/default.aspx
Bev.
-
I used to use VMware Workstation 10 and recently upgraded to VMware workstation 11. However, whenever I try to install a newer version of VMware tools, it will fail with message saying something like "VMware Tools can be installed in the Virtual Machine.
Yes, I am trying to install VMware Tools within the guest operating system, but I get this notification for all my virtual machines, I'm running.
I'm under 6 Virtual Machines simultaneously and they run on Windows 7 32 bit OS and configured with 4 GB of RAM, 1CPU, 100GB HD + 5 GB second HD for the swap file, NO printer, no sound card.
For each virtual machine, I changed about 50 + key of Windows registry and detect the values to hide from all the programs that they are running on the virtual machine.
I assume due to records, I changed, it confuses VM installer who it is not running on a Virtual Machine. Then I tried to change all these registers changed to send it back to the original value, yet I is always the same message.
I must be missing either some registry values or values that I restored is false. But I don't know which is the case.
I can simply delete all my Virtual Machines and start again with the new virtual machine, but I don't want to repeat this process whenever a newer version of the VM tools out. and installation of windows and search and replace registry values for each virtual computer is full of works.
So, here is my question. Anyone know how to force the update / install VM tools in my virtual machine?
P.S. I added under scripts in the file .vmx for each of the virtual machines. I don't think it would cause the problem but just in case I include it.
SVGA.vramsize = 268435456
monitor_control.restrict_backdoor = "" true ".
insulation. Tools.getptrlocation.Disable = 'true '.
insulation. Tools.setptrlocation.Disable = 'true '.
insulation. Tools.setVersion.Disable = 'true '.
insulation. Tools.GetVersion.Disable = 'true '.
monitor_control.disable_directexec = 'true '.
SMBIOS.reflecthost = 'true '.
memtrimrate = '0 '.
mainmem.usenamedfile = "false".
sched.mem.pshare.Enable = "false".
prefvmx.userecommendedlockedmemsize = 'true '.
Tent Installer to get the version information of the hypervisor of underling to see if it is a VM or not. This is done by contacting by back door.
Setting monitor_control.restrict_backdoor = "true"prevents communication."
-
I have acrobat 9 pro and I see no way to change the spelling of the text. I know the search for instructions to do this it is assumed to be a right pane, but I have no right pane and I don't see how to get one to appear. Thanks for any help.
In Acrobat 9 the tool is called the "Text editor" tool It is included in the "Advanced editing" toolbar, so just with the right button of the toolbar area and select it from the list of available tools. Or you can select: Tools > advanced editing > text editing tool
Maybe you are looking for
-
What will be the form of the file (file://) Protocol in firefox? Using file://servername/foldername, I am uable to open a folder. But it supported in other browsers. Need a quick solution to this issue.I used following code snippets:< a href = "file:
-
Bought a new laptop HP 15-be005TU. :=) Installed Windows 7 Ultimate (64 bit). Unable to connect to the network. No Wifi, Lan. After a few trials including finding Network Controller, controller USB and BCM43142A0 "No. Drivers." Help, please. Roland D
-
Satellite Pro 6100: peripheral USB does not
Can anyone help me please with the following problem. Satellite pro SP6100:After the computer starts, I get the error message USB device does not work correctly.I have nothing plugged into the USB port but I don't get the error message. Is there anyo
-
I get a pop up window when I double-click on a Win7 vi: "Labview.exe - error system, the program cannot start because ADLIBELF.dll is missing on your computer. Try reinstalling the program to fix this problem. If I just click the OK button in the pop
-
How to copyQuicken the files on my CD player
I tried to copy my files Quicken on a blank CD. After waiting for the green to indicate the end of the backup line, I tried to access the data I found on the CD. Nothing is on the CD. What should I do to make a backup copy of my Quicken on a unuse