Possibility to control the fan and the temperature under Linux

Similar Questions

• Is it possible to control the opening and the closing time of a script by an officer being connected?

  Hi Experts,

  We currently use scripts UCCX 7.0 with opening and closing hours of CSQ controlled via defined under the time of day in the script.

  I would like to know if it is possible to control the opening and the closing time of a script based on an agent is connected or not?

  So basically, the office is deemed open when an agent is connected and deemed closed when there is no connected agents regardless of the time.

  If possible, can you kindly point me in the right sense of how implement this corresponds to the script.

  Kind regards

  THERE.

  Hello

  Sure... in short:

  -Use a step "to obtain the statistical report" to see how many officers is connected, or "ready" (your choice) and store that in an int variable

  -If this > 0 then 'goto' your behavior variable open.

  -If it is 0 or - 1, then goto closed.

  Aaron

• HP Probook s 4440: the update of the BIOS under Linux

  Hello

  My laptop (HP Probook 4440 s) is in the list of laptops with BIOS updates related to security issues [1].

  But I'm on Linux, for which no updates seems to be available [2], although there is an update of the BIOS available for Windows [3]?

  Could someone tell me how to get and apply this update via Linux...

  THX,

  Abdellatif

  [1]: https://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04393276

  [2]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_107629_1 & swEnvOid = 202...

  [3]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_135974_1 & swEnvOid = 413...

  I did recently on my HP ProBook 450 G2 Kubuntu Linux 15.10 running.

  A new version of the BIOS (01.16 Rev.A 1 December 2015) was available, but for Windows only.

  What I had to do to install the BIOS under Linux:

  * Download the exe file (for example: sp74048.exe): this is an archive

  * unpack with 7zip

  * go to my laptop configuration: restart, press [ESC] >

  Configuration of the BIOS F10 > MAIN > system update BIOS > BIOS update using local media

  * read the instructions:

  "Place the system on a FAT32 partition no BIOS BIN file more

  on the system or on a removable USB hard drive

  under the folder "Hewlett-Packard\BIOS\New.

  Then, add or verify that the HP Bios update utility (HpBiosUpdate.efi)

  and the signature file (HpBiosUpdate.s12) are

  on the same partition FAT32 under

  the path to the following folder: "Hewlett-Packard\BIOSUpdate. »

  * Take a flash drive, create the folder ""Hewlett-Packard\BIOS\ " "

  copy the whole folder "BIOSUpdate" since the original installation file for her

  create the "New" folder and copy the bin on it (in my case "M74_0116.bin")

  * If at the end, the flash drive looks like this:

  \---Hewlett-Packard

  + - BIOS

  | \---New

  |      Mxx_xxxx. bin

  |

  \---BIOSUpdate

  all files here

  * place the flash drive in the laptop and "BIOS update using local media" hit the button [I accept] below "the system BIOS will be updated immediately.'." "

  Then update the BIOS HP appears saying: the system BIOS is updated day. > writing new BIOS Image. > Veryfying new BIOS Image. > restart.

  Fact.

  It is really beyond me why HP does not provide a simple archive with the appropriate directory structure and a readme file so that anyone could update the BIOS regardless of operating system.

  Warning: I'm just an average Linux user. This procedure worked for me, but before use, you must consider the risks for yourself. You SHOULD know what you're doing.

• Can I use PXI embedded controller connected to the PC under LINUX operating system

  Hi all

  We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

  Can I use PXI embedded controller connected to the PC under LINUX operating system?

  If Yes, where can I find its configuration in the .ini file?

  Thanks in advance.

  Hello bachir_elec,

  I'm sending you two links that I don't provide the information you need.

  Using Linux on an Embedeed PXI controller:

  http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

  Configuration of your PXI Linux system:

  http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

  You can take a look?

• Is it possible to control the local file system access?

  Is it possible to control installed programs access to the local file system content in the same way windows internet access firewall controls?

  That is, allow a program installed in "C:\Program Files\Test\" with the name test.exe access directory folder for writing and for reading Documents. Everything else is denied by default, in the case where he wants to read 'Desktop\Private lettre.txt' user will ask if I want to allow this.
  I found several programs with this feature, but they are outdated and do not support win7 64 bit :(
  CoreForce and online Security Suite (ESS) Solutions

  Hello

  Thanks for posting your query in the Microsoft Community Forum.

  Based on the information, it seems that you try to use a program to block programs installed to access the directory folder for writing and My Documents only for the reading of the code.

  It would be useful that you can answer these questions to help you further.

  1. you try to write an access program directory folder for writing and My Documents only for playback?

  2. How are you trying to code this program?

  If you try to write a program, the question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums for further assistance:

  MSDN forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Is it possible to control the Camileo H30 to the computer by USB?

  I would like to connect my camileo H30 USB and control the recording of here with PowerDirector or another program of this kind. Does anyone know if there is a way to do it? I tried to find the drivers, but it does not exist. My computer won't recognize it as a great so I can't even use it as a webcam for Skype, or...

  I can only access it as a hard drive for images and videos out of it...
  This should be easy to do... but it seems that it has not been properly thought...
  Any ideas?

  Thanks in advance

  Hello

  I have the TV and no, you can't control the cam using computer.
  The USB cable to move the files to cam for laptop computer or to charge the battery.

• Is it possible to 'control' the webcam (integrated in the laptop)?

  Have a teenage daughter @ approx. House & worried she could do on the internet. I was wondering if I can control the use of the webcam somehow. Any help will be greatly appreciated.
  Thank you

  Hi heatherRR,

  You can block the web cam application using Parental control by following the instructions in the link below.

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  You can view activity reports to check the activities in your computer that will help you block programs they use to access the webcam.
  Set up Parental controls activity reports
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• How can I control the temperature of the internal components in my office?

  I have a HP Pavillion Elite Windows 7 Ultimate 64-bit m9600t. I want to follow the temperature inside the Cabinet. What can I use? I understand there is a free software that will do it?

  Hello

  Download speedfan, GPU - Z and coretemp. These are all the freebies.  Pick and choose what works best for you.

• Satellite A200-193 - update of the BIOS under Linux

  Hi all

  I have a 3 years old Toshiba Satellite A200 - 193 (PSAEC), purchased in France, it's apparently not released in the United States - or not under the reference of thos - because I can't find it in the database of the Toshiba bios. (I could post in a french forum, but there is no such support :-/)

  The bios is a Phoenix, v1.30. This bios is known to have a bug inside, preventing the unofficial OS and not patched like linux to properly treat the acpi (control of the fan in particular). The temperature is higher than it should be.

  I tried to update my bios to 1.80 through the en of the toshiba site, but I and draw attention to say "this bios should only be used with Vista.
  OK, so it's purely disgraceful given the specific instructions of OS have NOTHING to do inside of a bios, what are my options?

  Has anyone installed this BIOS? He end up by properly?

  Thank you very much

  Hey Buddy,

  Please don t get me wrong, but Toshiba doesn't provide any support for Linux. This means that you search yourself for drivers or solutions and that s why the BIOS update is only Windows Vista supported.

  This means that if you want to do this update, you must install the operating system preinstalled Toshiba, I think that in this case Vista. Then, you are able to update the BIOS.

• Satellite Z830 - update of the BIOS under Linux?

  Hello

  I recently bought a Satellite z830, which I am very happy.

  Given that requires it my work, I wiped the hard drive and installed Ubuntu linux instead of the default Windows installation.
  Now I want to update the BIOS with the latest version, but unfortunately it is only available as a windows .exe

  Is it possible to upgrade the version of BIOS using only Ubuntu?

  Thank you

  -Chris

  Since the European driver page Toshiba simply provides a Win-based BIOS update version, you'll need an OS running in the window to update the BIOS-based victory. :(

• Satellite P100-437 - the update of the BIOS under Linux?

  Hello

  How can I update my BIOS when I only installed Linux? Your BIOS updates require windows.

  Thanks for the reply

  Hello

  First of all what laptop you have exactly?

  Normally the BIOS can only be updated on Windows so you need to install Windows to update the BIOS. The point is that the BIOS update is possible on OS preinstalled and that s not Linux. ;)

  Alternative, you can contact an authorized service provider. Maybe they can update the BIOS in DOS mode via disk or floppy disk. It s worth a try

• FRM-10043 can not open the file under LINUX

  FRM-10043: could not open the file.
  I created a form correctly in windows. It works very well.
  Now, I have to use it under LINUX. Then I copied the fmb file in Linux
  where the default test.fmx is placed.
  
  Now, I've run the sub query and got the result can not open the file.
  
  
  [orabif@br bin] $ sh frmcmp_batch.sh userid=CNT/CNT@cmt
  compile_all = Yes module_type = form module = logonfile.fmb
  
  
  10.1 forms (form of the compiler) Version 10.1.2.0.2 (Production)
  
  10.1 forms (form compiler): Release-Production
  Copyright (c) 1982, 2005, Oracle.
  All rights reserved.
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  PL/SQL Version 10.1.0.4.2 (Production)
  Oracle V10.1.2.0.2 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle 10.1.0.4.0 Production CORE
  
  FRM-10043: could not open the file.
  
  Form not created
  
  
  Please help me solve this problem.
  
  * I know that there is no need to compile OLB files. but my forms display error that
  FRM-18108 has no dependent objects.
  
  When I use Frmcmp.sh GUI is the compiled form succesffully if there is no OLB attached with it.
  It gives Fr-18108 when OLB is attached with the form that he
  
  Timely help is needed...
  
  Thanks in advance...
  
  with cheers
  Sprity...

  spirty,
  This sounds like it could also be a permissions problem. I'm guessing that when you copy-n-Paste the form on the LINUX Server, you did what Windows Explorer. When they are copied to the server LINUX file will be created with the default privileges defined on the file. I recommend that you connect to the LINUX Server and check the permissions on the file. If your file permissions do not match the permissions of the text.fmb (or other files .fmb you have there) I suggest that you change the permissions so that they match.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• In android, is it possible to control the flow of the tools rather than letting users choose? for.e.g. launch the first harvest and then rotation function after users click on "Apply"?

  In android, I would like to have control over the flow of the tools. I want users to rotate and crop everything first, before they don't embellish other stuffs.

  You can get better help in a forum for the program that you are using

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it says all communities) to open the drop-down list and scroll

• Is it possible to control the Organization of Photos?

  I finally bit the bullet and improved Mavericks with El Capitan and who now have to deal with pictures. I understand that pictures is designed to look like my iPhone and the iPad, but I don't store 64 000 photos on my iPhone. I'm not interested in using iCloud, so the fact that the Photos work well with iCloud is questionable. I got my photos carefully classified into events in iPhoto, often also the keywords tag and gathered in the smart Albums. I know that these events still exist on the sidebar in Photos, but I can scroll is no longer if they visually, using the key photos to see what event I'm (and scroll through a list of 450 events in a sidebar is quite heavy). There is no way to quickly scroll through my large library AT ALL. When I look at the years/collections/moments 'organization', it looks like big piles of photos, with no logic in how they are organized. You can not just get a representative of the group photograph, he must see all (& they are so small, that really nothing appears if you go at times for each & every group). They have random dates (sort of chronological, but not always), random places, that was (I found a lot of crazy places assigned - for example, a group of photos that were all taken home with a unknown place not assigned - in another State, no less!) - in short, not useful organization. If I want a picture in particular of January 2013, it will take a little research.

  I would like to put pictures together into groups that make sense to me. Is it possible to do that, far from putting a keyword on each. unique. Photo?

  p.s., Maybe someone else has already asked/answered my question, but when I tried to search for similar issues, the search engine could not do. It turns out that "Photos" can also be read as simple 'photos', so the search engine came up with hundreds of responses - any question with the word "photos". Note to Apple: choose a single word to your photo in the future program, please. Sheesh.

  Events are dead as a concept for the organization. Photos used Moments.

  You can change the size of the images with the zoom slider.

  You can use the search tool to quickly get to January 2013 - just type Jan... and see suggestions.

  If you want to group images by your own categories can use keywords or smart Albums Albums. It's really no different than iPhoto.

  Other than that, it's perfectly reasonable to find that the app is not good for you. It is not mandatory to use it and there are other managers of photos out there that would suit your workflow better. This is especially true if you have no use for the photo Cloud element.

• Is Firefox Nightly Build 16.0a1, possible to move the tabs under the favorite bar? Cause simply rightclick and uncheck the option is no longer there.

  All stated above

  I see that Madperson has already edited the message.

  I just tried it with my party and it's easy to reset using about: config.

  1. Key in the address bar Subject: config and press return
  2. accept any warning that may occur
  3. It lists all your preferences, use the filter to narrow down the list
  4. looking for browser.tabs.on.Top preference should be prexisting and will have the value true false
  5. Right click and toggle the value of false and true as needed