In France power cords

I live in the United Kingdom and intend to use my laptop in France. Should I buy a power cord specifically designed for the France? The manual says not to use a stem adapter from three to two on the UK power cord which would imply the need for a specific cable for French food. Is this good? I hope someone can help

Hello

I found a useful site on, Plug-and - Sockets, in different countries

http://www.powercords.co.UK/standard.htm#France

Tags: Toshiba

Similar Questions

  • Power cord for my iMac has crunched, how do I get a new one?

    What I do my power cord for my iMac has been chewed and I don't know if I can claim the title of the guarantee or if I should just buy a new...

    As I can use it only if I put in some way and cannot be pulled.

    If the plug of your end iMac has this form:

    Then the power cord to any standard computer work.  It may not be

    White enough with the beautiful fitting molded but it will work.

  • Indicator light power cord

    That means the light orange on the power cord?

    Support actively at a high rate.

  • After resetting the iPad to default it show that the power cord is trying to connect to iTunes

    I got an iPad 16 GB factory reset default after a while display only the power cord going to iTunes, need help to get this operational back, it worked Ok before resetting all we have tried to make clear the former owner information

    The iTunes icon and cable image means he went into recovery mode, you will need to connect it to iTunes to your computer to reset the iPad, and you can then restore/resync your content.

    If the previous owner had not disconnected from the settings > iCloud on it and find my iPad has been activated, you will need to communicate with him or her: disable find them my iPhone Activation Lock - Apple Support

  • A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    Yes.

    http://www.Apple.com/Mac-mini/specs/

    the voltage may vary from 100-240 V AC.

  • Power cord from the airport

    Is the power cord for the airport bought in Hong Kong not usable in the Canada?  My airport does not at all.

    The airport itself base can work with a variety of outlet power settings, but the types of decision-making between Hong Kong and the Canada are completely different. Base station supports a range of 120-240 v, 50-60 Hz energy sources. The other thing to consider is that the radio channels used may differ between these two countries.

    Sockets (120 v, 60 Hz) used in the Canada is similar to that used in the United States and look like one of the following conditions:

    While in Hong Kong (220v, 50 Hz), they use the following type:

  • My iPad displays a symbol of power cord and iTunes

    I tried all things hold sleep button to connect to the computer, then hold power button waiting and then start your computer repair but the iPad won't do anything except show the same screen, then after a few hours, the iPad is going to a dead battery. I tried to put the power cord but just ping guard. HELP Please,

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

    More info here:

    https://support.Apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • Power cord

    iMacs come with a single power cord.

    Is it safe to just plug the straight iMac in the mains or via a power Board?

    You can connect either. Both are safe as long as the power strip is approved by UL.

    See you soon,.

    GB

  • Pavilion DV7-6175us: wire frayed at the power cord

    I just discovered this thread in my power cord cut tonight. Spare part number is 609940-001. As you can see, the white wire is broken, but the only issues I have experienced with my laptop is my AMD display driver to crash. But after you have reinstalled it and Direct X, as well as some versions of Microsoft Visual C++, the stability of video cards has improved considerably. But tonight, he crashed twice in 5 minutes, and then a few seconds later, just let Windows down and showed me a message of BSE on my display driver. I then looked at my power cord, and I find the severed cord. The severity of a problem is the next, and how long should I try and get a replacement cord? Thanks for reading and thanks in advance for your answers.

    Stop using it. It is a fire hazard and a danger to your laptop. Get a new one immediately.

  • substitute the new power cord on the charger?

    I have a MACBOOK pro... the cord to alveoli? It has been is so frayed since I am under warranty they sent me a new. I need instructions on how to replace it on the charger. I'm out of the country on a small island so I can't communicate with them... Please help me find video or instructions. Thank you

    Look at the photos in this article:

    Find the right adapter cord for your laptop Mac - Apple Support and sector

    the AC power cord slips laterally for removal and replacement "block". Does have a substantial 'push' to begin to move.

  • My time capsule 2 TB suddenly stopped working after 14 months, is possible to be to power Sunrise again? I tried a new power cord and the different points of sale.

    MY time capsule 2 TB is is no longer under tension after 14 months. I changed the power cord and made sure that the work of output and still no power. Is it possible to fix it?

    Yes. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  • Need for new Satellite A300 adapter & power cord

    Hi Forum,

    You need to replace the A300 adapter & power cord. I live in the United Kingdom. Do you know if the Toshiba ASP at the United Kingdom replace these components? Can I order directly from Toshiba? I looked on Amazon, but most of them seem not real!

    Thank you all!

    Hi Susan,

    Normally you can order the adapter AC and power cord of each authorized service provider.

    Just give them a call or email. I m sure that they can send you a new adapter. :)

  • Power cord for a Toshiba NB200-10Z bought in the United Kingdom EU?

    Hello

    I just ordered the Toshiba NB200-10Z of Amazon.co.uk because the model wasn't available everywhere in Finland, despite being listed on the site of Toshiba Finland. It ' probably be only with the style UK power cord & plug-and - my concern is where can I find a power cord appropriate for the unit (with a schuko type plug)? Or are the UK and different EU cords also at the other end where they plug in the power adapter, which is what I need to get a power adapter and a power cord?

    Thanks for any information.

    Best regards
    Boucicaut

    Hello

    I agree with Al - eX. As you can see on the underside of the adapter AC/DC it can handle voltages range from 110 to 240 volts.

    You need only a new power cord. Therefore, you can contact the service provider authorized in your country. Maybe you can exchange the cable and if you get one free.
    Alternative go to your favorite computer store. Such a cable, you must find there too.

  • Satellite Pro L500 - stops when the power cord removed

    Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

    Someone please help. I have not installed anything new.

    Hey,.

    For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

    I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

    You can find a list of all FSA here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Good luck! :)

  • Designjet 1055 cm liked: designjet 1055 more power cord

    I am need of a power cord for my Designjet 1055 cm plus. It seems that I need a power cord C13, is that correct? Will work any cord or I need something specific to the printer?

    If in the United States, it's just the standard desktop computer or computer monitor power cord.  None of them will work.

Maybe you are looking for

  • Firefox does not recognize the VLC plugin

    Firefox on Lion is not recognize the VLC plugin. I tried to reinstall the plugin and Firefox do not recognize. I also checked that it is installed in the correct location (Library/Internet Plug-ins)

  • Firefox downloads Web site, but not properly

    It downloads the page but the page window is too small, so you can't interact with it.

  • How to transfer the contents of my Itunes from one PC to another?

    Hello I tried several options that I found on the web, but no seem to work and my playlist are all empty? I have the usual content in Itunes, music, games, memos, tones... I would like to use Itunes as I did on my old computer to my new computer... T

  • LabVIEW 7.1 application does not work on Win 7 64 bit

    Hello I created an application with LabVIEW 7.1 and related Setup (including the support screws). After installation, the application works on Win XP 32-bit, Win 7 32 bit, but he can't find some analyze VI under Win 7 64 bit. Is a LabVIEW 7.1 all app

  • Vision information

    I'm not very experienced in labview, andI use OCR with vision assistant. I would like to know if anyone could tell me what is the threshold, and why I have to train the wizard of vision with characters that the database has already, when I move the o