in one my pring don't notprin

Similar Questions

• I have 2 accounts admin and want one removed. Don't let me do one, but not the other?

  My Admin account, that I had from the beginning which is password protected and the Moose is can be removed.

  The second admin account that has been created and has no password can be removed... just the origanl one maybe?

  Has always been my understanding that you should always have at least two accounts on your system administrator.

  As a regular very knowledgeable of this forum has compared to him, it's like having a car with a single key, what do you do if you lose this one key? Basically you're toward the top of the proverbial Creek.

  It's the same with only have a single administrator account, what should you do if your admin account is damaged?

  My thoughts are that it is much better to prevent than cure.

  Kind regards

• How to scan without ink in psc 1610 all-in-one? I don't need to print, just scan

  I use Mac OX 10.6.8.

  The error message is "Insert print cartridges."  But I have another printer for printing, I don't need it for scanning.

  Hi Casey,.

  Are how you trying to scan? If you use the HP software, try using the Apple built in scanner (imager Apple) it * may * allow you to bypass the no problem ink.

  In addition, you can mark a resolved post by clicking "mark as solution" by a mail, right next to the reply button.

• My windows do not appear when I choose one, so I don't have any options

  Hi, I'm on Mac, Illustrator CC, and my windows do not appear when I click on them. I want to change my gradient, but I can't.

  There is certainly an option or something I missed.

  Thank you

  Try and reset the workspace you are using. Or select a different workspace. Or turn on the frame of the application.

• At startup, the screen displays two websites of mozilla instead of one, why?

  To start Mozilla, each time, two sites of Mozilla display. We're 'Mozilla Firefox Start Page' and the other is the screen "on the first installation of Mozilla". Installing the first page is displayed on the screen. Both are active.

  I would like to see a single one. I don't know what to do.

  You can check for problems with preferences.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• When I logout out, I get a dark screen, swirly wheel and a box that asks if I want to continue the installation or abandonment, but it wont let me click on one.  How can I fix?

  When I logout on my Macbook Air, Safari 9.1, my screen darkens, and there is a box that asks if I want to continue or cancel the installation.  But I can't click on one.  I have not tried to install anything for awhile.  Is this something I can fix it or what I have to visit the Apple store?

  You may have installed one or more variants of the Trojan 'InstallMac '. Please take the following steps to disable.

  The criminal behind this attack tries to make the malware difficult to remove by varying names of the files it installs. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Back up all data before proceeding.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return. A folder named "LaunchAgents" opens.

  Press command-2 key combination to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click on this title to sort the content by date. This will make the related files easy to identify regardless of their names, because they will have the same modification date.

  2A inside of the folder that you just opened, there may be files with the name of all these forms:

  something. AppRemoval.plist

  Something.download.plist

  Something.ltvbit.plist

  Something.notification.plist

  Something.Update.plist

  Here, something is usually an empty string of sense, for example one of the following:

  Epolife

  InstallMac

  Javeview

  Kuklorest

  Manroling

  Otwexplain

  Here are examples, not a comprehensive list. The chain could be anything, and there might be more value of something. Looking for a group of files with the same date of change who match the description.

  Lately, the striker of "InstallMac" a were quick strings 'AppRemoval', 'download', 'ltvbit' and 'update' in the names of its records. For example, you might see file names such as these, instead of the above:

  something. AppVemoral.plist

  Something.dolnwoad.plist

  Something.btvlit.plist

  Something.uadpte.plist

  You may have more than one copy of the malware, with different values of something.

  Place all of these in the trash. If there are other files whose name begins with something, those in the trash also move. You can get a caveat that some files are locked; Delete them anyway.

  Once you've done that, we may not have anything left in the LaunchAgents folder; in this case, you can remove the folder, but otherwise does not delete it. Other files in the folder are not necessarily malicious (though they may be, if you have also installed another type of malware).

  Log off or restart the computer. The Trojan horse should now be inactive.

  3. This step is optional. Open the folder as in step 1:

  ~/Library/Application Support

  and move it to the trash of the subfolders with the name, something you found in step 2.

  Do not move the Application Support folder or anything else inside.

  4. open the Applications folder. If there is an element named something, or "Hell Zip", or with any of the other names listed in step 2, then drag it to the trash.

  If in doubt, press option-command-4 key combination to get the apps by date added. Look at the apps that have been added since you first noticed the problem. If there is one, that you don't recognize, drag it to the trash.

  You can get an alert that the item is locked. Confirm that you want to move to the trash.

  Empty the trash.

  If you receive an alert that the application is running, force it to quit.

  5. from the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  Uninstall all extensions, you don't know that you need. When in doubt, remove all of them. None is required for normal operation. Do the equivalent with Chrome and Firefox browsers, if you use one of the people.

  If the window does not open, restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

  6. replace the search engine and home page in each of your browsers, if either has been changed. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

• I don't have the refund?

  I didn't buy Terraria, so I'm a refund and all, and I got the email saying I'd get one, but I don't understand. Can someone tell me what is happening?

  How did you buy article, and since how long you are told that you would get a refund?

  If you used the balance of your account and it has been more than a week, and you tried to disconnect and return to your account to see if your balance is updated, then contact Support again and include your file number.

  If you used a credit card and it is more than a couple of weeks then contact Support again and include your file number.

• looking for HP? : caps lock lights up when I press a, s f keys d resulting in a capital letter when I don't want to help!

  My a, s, d, f keys switch on the lock key cap causing a capital letter when I don't want one. I don't see any button stuck etc.? Everything started happening. any help appreciated as I cannot unlock my computer. My password has one of these keys in it. Help!

  Hi @mexpensive33,

  Thank you for your response.

  If you do a search on the web there are videos on the removal and cleaning of the keys on the keyboard.

  There are also several YouTube videos if you want to view.

  If you are unable to solve the problem and it's a question of physics with the keyboard you can replace.

  If you see the maintenance guide and maintenance for your laptop (if available), you can get part numbers and instructions for replaceable parts by the customer to do an auto repair.

  I would need the exact model of the HP Envy to get the interview guide.

  If you should be in warranty please contact HP support for service options.  If you are out of warranty you can also try a local computer repair shop.

  Good luck!

• The all-in-one to buy?

  Hi, I am looking to buy an all-in-one printer to replace my old printer Deskjet 710C, who has worked well with my old XP desktop, but does not work with my "new" Windows 7 laptop (I want to use an all-in-one with two machines).

  Some advice please... I've been watching two printers I like the look of, but of course I want to be absolutely sure that they are compatible with both.  This is for home use only, so I'm looking for only something relatively basic.

  The two all-in-one, I like the look of are: 3055 A Deskjet and Deskjet 2510.

  The specs. my PC are the following: my desktop using XP, SP3 and 32-bit.

  My laptop is Windows 7 and 64-bit.

  I'm not too bothered about using the all-in-one wireless device as I could wire up to two p.c. but, if it can be used with wireless, it would be an added bonus.

  I'd appreciate it really any advice on if either of these two all-each would be compatible with two p.c.., or to hear if anyone can suggest any other all-in-one's - I don't want to buy something that I can't use it with the two c.p..

  Thank you very much.

  The 3055a Deskjet printer is wireless capable, but the 2510 Deskjet is not.

• Windows 7 pro deactivation lexmark all in one for pilots.

  I have 2 different Lexmark all-in-one printer / scanner. Windows 7 pro in just the last 2 weeks, via a download/update made my Lexmark x 2470 useless, corrupt some thing in the firmware and disabled drivers for my Lexmark 4530 thus making it unusable. Anyone having the same problems, have their software Lexmark corrupted by Microsoft updates?

  Hello

  Please contact Microsoft Community.

  Let us know the exact error message you get.

  Make a test with the steps below:

  Step 1:

  Try to run the troubleshooting of the printer utility.

  Click Start.

  In the search bar, type troubleshooting.

  Select the printer in the list and click Next.

  Step 2:

  Turn on Auditors invited on all computers.

  Step 3:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Turn on WE network discovery
  Turn ON file and sharing printers
  Put IT in the section sharing public folder
  Turn ON password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. Don't STOP FIREWALLS; CONFIGURE them PROPERLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT CREATE PASSWORDS, EVEN IF ONLY the MOST SIMPLE . If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

  How install a printer connected locally to a different computer if the driver installation routine does not help:
  
  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

  Configure file sharing / print:

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Share a printer:

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  I hope this helps.

• "You don't have permission to access to" a computer - Windows 7

  Now, I have 3 laptops in my house.  We're on Windows 7 (let's call it W7) and two are on Vista (we'll call V1 and V2).  On my Windows 7, I can connect (via the network - all PC use the same Linksys wireless router) v1 without problem and see shared files, but I can't connect to V2.  I get the message "you don't have permission to access \\PCName."  Now if I put in place a different id user on W7, I can access the V1 and V2.  I need to stick with my original if possible user id, because this is where I've already implemented a large number of programs that I need for work.

  Any ideas on what could be going on with my original user id?  He worked two weeks ago, although I added a few programs as I finally tried access V2.  Thank you!

  You can 'stick with your original user "; just add it to the machine of V2. See point c below for more details:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• HP Photosmart all-in-one 7520 showing Air Print Macbook Pro Maverick 10.9.4

  At one point, I don't have Air Print showing next to the printer in system preferences. Printer and scanner works well, but I was told by someone on this forum who Air Print should not see. How can I remove Air Print. I have a Macbook Pro Maverick 10.9.4. HP Scan version 4.1.1. I did an update earlier this year and the impression of Air was not there.  See Office for Mac not choose for the question. Thanks for your help.

  Hello Sunshyn. It worked, no Airprint shows. Thank you for your help.

• BlackBerry smartphones, what is the difference between the messages icon and the one with my e-mail address as title?

  Hi, I'm new to blackberry. I just got a "BOLD", and some of the icons seem to be redundant. If someone could explain why I would really appreciate it. I had trouble getting the results of a search of forum so I apologize if this topic has been discussed recently.

  What is the difference between 'messages' (which looks like an envelope) and the other envelope with the globe on it (which appears as [email protected])?

  Can I delete one? I don't understand why there are two.

  Also, why is it "medianet" and "browser"? They aren't going to the same place? What is an AT & T thing where they try to control the universe?

  Thanks for your help,

  KG

  With the BlackBerry, you can have up to 10 "BIS" (BlackBerry Internet Service) email addresses, but also a company e-mail sent to your BlackBerry address.  It is also SMS (text) messages, PIN of PIIN messages and MMS messages.

  Each BIS email address gets its own icon which will appear only this e-mail by e-mail address.  The Messages icon ALL E-mail addresses sent to the BlackBerry.  It will also display all messages in pine and optionally show the SMS (text) messages and phone calls, and IM still active cats.  But there is no icon for only PIN messages.

  The fact that there is no way to separate the email from company to a simple icon is a point of contention for some users.  There is a product (Empower BES Mailbox - OTA / Web $20) which will create an icon that displays only the Enterprise email.  However, you can also create a saved search to display only the BES (BlackBerry Enterprise Server) email.

  If you prefer using a simple icon of Messages or have separate icons for each email address is a matter of personal preference.  If you have only one or two emails being sent to your BlackBerry, there is probably little difference.  However, I have six accounts BIS as a BES account delivered and many prefer to have a place to look when I hear or feel that a new message has arrived.

  In addition, equipped with a full QWERTY keyboard device, I'd rather be able to use the shortcut keys to access ALL the applications on my BlackBerry.  In fact, I have everything I don't need (including Messages, all messaging icons, address book, calendar, Notepad, etc.) in a folder called hidden since I never need them!

• How can I change my desktop on an Aspire One Happy picture

  How can I change my desktop on an Aspire One Happy picture

  Hi Maryannebuttigieg,

  Welcome to the Windows 8 community!

  From your problem description, I understand that you want to change the image of office on the Aspire One Happy. Don't worry; I'm here to help you.

  I suggest the following methods and check if it helps to solve the problem.

  (1) open Personalization by hitting swipe in the edge right of the screen, tap search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), registering personalization in the search box, type or by clicking settings and then type or customization.

  (2) to change the wallpaper, press or click on wallpaper, are looking for the pictures you want to use, select the check boxes for the photos you want to include in your slideshow and then press or click on save changes.

  Reference:--

  Introduction to themes

  http://Windows.Microsoft.com/en-us/Windows-8/get-started-with-themes

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards

• Windows 8 deleted my Admin account with a regular one?

  I tried to do a video editing for school, so I connect my iPad to copy video clips and try to install an application (on the account admin, our default one that we don't have another). The app wants a login, so I have connection with mine. After finishing, I try to log on to the admin account, to see that is he. It is not even under the button "logout". Apps and even PC settings will not open. What is c?

  You said that you put your password into an application and then he does this?  What app did?  If I were you I run a system restore quick return to 24 hours ago and repair the damage he has caused.  This restoration will not change your files, it returns only return all the values of registry changed.  It takes about 2 minutes, and if you don't like you can cancel it, so you don't lose to try.