Windows 7 pro deactivation lexmark all in one for pilots.

I have 2 different Lexmark all-in-one printer / scanner. Windows 7 pro in just the last 2 weeks, via a download/update made my Lexmark x 2470 useless, corrupt some thing in the firmware and disabled drivers for my Lexmark 4530 thus making it unusable. Anyone having the same problems, have their software Lexmark corrupted by Microsoft updates?

Hello

Please contact Microsoft Community.

Let us know the exact error message you get.

Make a test with the steps below:

Step 1:

Try to run the troubleshooting of the printer utility.

Click Start.

In the search bar, type troubleshooting.

Select the printer in the list and click Next.

Step 2:

Turn on Auditors invited on all computers.

Step 3:

Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

Turn on WE network discovery
Turn ON file and sharing printers
Put IT in the section sharing public folder
Turn ON password protected sharing

A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. Don't STOP FIREWALLS; CONFIGURE them PROPERLY.

(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT CREATE PASSWORDS, EVEN IF ONLY the MOST SIMPLE . If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

Start > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UAC

Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

How install a printer connected locally to a different computer if the driver installation routine does not help:

Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

Configure file sharing / print:

Troubleshoot network printer:

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

Share a printer:

http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

I hope this helps.

Tags: Windows

Similar Questions

  • HP Officejet Pro 8620 e-all-in-one printer windows 8

    Printer e-all-in-one-HP Officejet Pro 8620 Windows 8.

    wireless printer is. printing from iphone is OK

    Since my PC win 8 not sending a file to filesgo-printer - printer not respongding - no message.

    I have install new printer 8620 on 8600 series of drivers printer or printing only from my PC

    How can I fix the thanks of printing problems

    Hi @yosiwajcenberg , welcome to the forums there.

    I read your post on your Officejet 8620 do not print for you, on your system Windows 8. I suggest you try the following steps.

    1. go to your control panel and uninstall your printer.
    2. hold your key to Windows and the R key on your keyboard to invite the run dialogue box.
    3. Type "coil" and press enter or click OK.
    4. Select and open the drivers folder, select the x 64 folder if you have a 64-bit operating system or the w32x86 if you have a 32-bit operating system.
    5 open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
    6 reinstall the printer: HP Officejet Pro 8620 e-all-in-One Printer series full feature software and drivers

    I hope that helps!

    Have a nice day

  • HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

    We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

    The printer is installed and can print successfully from 3 desktop with Windows OS 10.

    4 desktop pc with Windows 10 is not able to install the printer drivers.

    When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

    We have tried to remove the printer some time but without success.

    Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

    Adding the printer manual, also don't do not install us the printer driver.

    The only driver installed is the scanner.

    We are out of ideas, you can help us with all the great ideas.

    Sincerely,.

    Gilbert

    Hello

    I'm glad to hear that your problem is solved and everything works fine now.

    Good day!

  • Need driver for a Lexmark printer 1200 all in one for windows 8?

    Where can I find drivers for a Lexmark 1200 printer all in one for windows 8?

    www. lexmark. pilotmanager.com.

    MS does not specific pilots for other company equipment.

  • cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

    I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

    Any help is appreciated!

    Hello NRHII,

    Welcome to the HP Forums!

    I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

    (1) turn off your printer
    (2) unplug the power cord at the back of the router
    (3) restart your computer
    (4) wait less than 60 seconds, reconnect the power cord to the router
    (5) turn the printer, wait for the computer to turn on

    The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

    1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
    2. Tap the Installer icon ( ).
    3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
    4. Tap the name of your network and then press OK .
    5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

  • HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

    Hi all

    HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

    My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

    Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

    Thank you

    Glen

    Hi oorwill44,

    Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

    Please take a look here: how Scan: Windows XP

    I hope this helps, let me know if you have any questions.

    Thank you

  • OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

    Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

    Hello dhe8011,

    Welcome to the HP Forums!

    I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

    Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

    Let me know if this document solved your problem or not.

    Impatience on your part.

  • HP Office Pro 8600 e all in one printer wizard disappeared

    I am running Windows 7, Office Pro 8600 e-all in one

    Out of the blue, two laptops in the House lost priner Assistant and all of its features (fax to the folder, etc.).

    Windows has had some updates for a few weeks so I can only assume it follows from there.

    For two laptops, I uninstalled and reinstalled the CD and the software of latest driver on the site of hp without success.

    I ran HP print and scan doctor without success.

    Any help would be greatly appreciated... I am at a loss.

    Hello

    On the start menu click programs and select HP, then select the HP Officejet Pro 8600 folder and proceed with the uninstall.

    Then download and install the following software, do not use older since the CD or software programs you can registered on the HP site in the past as the problem will remain while any previous software used:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-3&cc=us&DLC=en&LC=en&OS=4158&product=4323659&sw_lang=

    Once you have finished, restart your PC and click the HP Officejet Pro 8600, located on your desktop.

    Please let me know the results,

    Shlomi

  • Lexmark rhow bar I know if my lexmark all in one p4350 printer is compatible with this computer

    I have an old lexmark all - in - one printer series 4300 machine type model #4421-001

    I need to know how insta on my new HP desktop... Help

    Go to the Lexmark website and see if they have Windows 7 compatible drivers.

    Good luck.

  • HP Officejet PRO x 64-o: I have a? on the screen, it is a HP Officejet PRO x 64 all in one

    I have a? on the screen, it is a HP Officejet PRO x 64 all in one

    THANK YOU FOR YOUR HELP: THE PRINTER MODEL # IS SNPRC-1401-02

    AND THANK YOU FOR YOUR TIME!

  • Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

    I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

    What happens and how can I solve this problem?

    Hi TM1997,

    Thanks for the reply!

    Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

    Have a great weekend!

  • Re - install a hp psc 1401 all-in-one for windows 7 64 bit

    does anyone know how to re - connect a hp psc 1401 all-in-one for windows 7 64 bit? This configuration worked flawlessly for several years now, but it has suddenly stopped working.  I discovered that this model is even more appears on the software and drivers HP site.  Peroxide of hydrogen used to have such excellent customer service, but now it's like this all-in-one is useless without the right software.

    Hello

    The HP PSC 1401 software can be obtained from the HP site.

    Here's the product page with the download of the software of your device:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=1103491&sw_lang=

    Kind regards

    Shlomi

  • Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found

    Just upgraded to Windows 7 and my Dell All IN One Printer does not print.  It is said that the pilot of the AIO 942 not found.

    Anyone where I can download this driver?

    See http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20942%20Photo%20All-In-One%20Printer&v=Dell&uid=942STD&pf=0&pi=1&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit.

    There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.

    They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.

  • Sending faxes/install of the HP Officejet Pro 8500 Wireless all-in-One

    I'm on a po to buy this printer but have a question that I can't find an answer for without having to buy the printer. I have no Modem built into my PC.

    I am wanting to know:

    What I have a fax modem from my PC

    An external USB Modem will work

    To really stretch the question, how the external modem will connect to the all-in-one

    The all-in-one has a fax for stand-alone fax functionality.

    If anyone knows these answers I would appreciate a response. HP Officejet Pro 8500 Wireless all-in-one is on currently on sale $ 150 off and I would like to grab one before the end of the sale.

    Thank you very much

    Jerry

    When I talked to my PC manufacturer, I discovered that you can't do what I wanted to do, modem or not, since the PC Fax documents

    You can mark this question as answered and thanks for the help.

    Jerry

  • install hp officejet j4550 all-in-one for drivers from the Web site. all works except scan option

    all-in-one for drivers from the Web site. all works except scan option

    what OS you have... Windows 7, Vista XP? and when you try to scan it is out of the front of the printer or from the software of the PC... and when you try to analyse what is happening.

Maybe you are looking for