In stand by mode physical map?

Similar Questions

• After the stand-by mode screen turns green or the GET messy graphics - Satellite M100-165

  When I leave my phone for more than 20 minutes on the stand of mode and I try to turn it on again the screen turns green or the graphics be annoying.
  In order to work, I have to reset and turn it back on. Does anyone know what I can do about it?
  Thanks in advance.

  Hello

  This problem occurs since the first day? Is your unit a clean install of the OS to factory settings?

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Flexconnect AP stuck in stand-alone Mode

  Hi all

  I have all my APs configured under flexconnect at the remote site.

  I have one controller at the head office.

  There are two redundant links of MPLS from the main office to the remote site.

  Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.

  I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .

  But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).

  Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!

  There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.

  If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.

  HTH

  Rasika

• Limitation period for H-HARVEST stand-alone mode

  Hello

  We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.

  Y at - it any reference to show?

  Concerning

  Luis Noriega

  Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• How to use an expression with "Derived physical mapping.

  I'm trying to use an expression in the "Physical mapping Derived" option in the business model. I chose the 'University Code' logical column and then I clicked on "Edit" option under the "Derived physical mapping. I tried to put the phrase in two different places - in the "Column mapping" tab and in the tab "Content", under "Use this WHERE clause to limit the rows returned"-, but neither one worked. The system gives me an error, but also, there is no search.

  Is there something wrong with the expression below, or I am connect the expression in the wrong place?

  CASE

  WHEN "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE"= 'DOMC' THEN 'CARL '.

  WHEN "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE' = 'NOMS-LAKE' THEN 'NOSM.

  WHEN "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE"="NOMS-LAUR"THEN"NOSM.

  WHEN "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE"="LAUR-ALGM"THEN"ALGM ".

  WHEN "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE"= 'LAUR-HRST' THEN 'HRST.

  ANOTHER "orcl". » ». "" "" EDCS_CORE '. "" D UNIVERSITY '. " UNIVERSITY_CODE ".

  END

  Hello

  So let's not forget the 'Content' tab and the WHERE clause field (this is something else and you don't need here).

  If you open the logical column properties, go to the tab 'Source column', you are supposed to have the "physical mappings Derived' already activated (because your column come from the DB).

  There you click on the LTS source and click 'change '.

  You have now before you all the columns from the source to the logical Table mapping.

  Select your 'Code of the University' column, and then click the "fx" (top right of the window).

  Here, you can put your CASE WHEN.

  If you are not satisfied with the result (no given or not look it up), have a look at the generated SQL physical (your BOX WHEN is inside) and where is the problem (maybe your column in the DB has spaces before or after the codes and things like that).

• physical mapping of MDB TIMESTAMPDIFF or derived expression

  Is it all the same to install a timestampdiff calculations as a derived column aggregation and get or must it be done as a physical mapping?

  TimeStampDiff (SQL_TSI_DAY, "xxx". "Fact". "" From the Date", VALUEOF (NQ_SESSION. ("' EFF_TO_DATE") if I try this using "Of Date of application" the fact or dimension, the calculation shows up with tab grouping darkened.

  Derived columns are supposed to apply the post aggregation calculations - so the tab is grayed out.

  Your best bet is to use TimeStampDiff in physical mapping.

• Try to get the listener to the APEX to run in stand-alone mode

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
  
  Thank you!
  
  Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
  NEWS: Check out: /home/oracle/apex_listener/apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  INFO: Extraction to: / tmp/apex
  INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
  INFO: From Embedded Web container: / tmp/apex
  December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
  INFO: http://localhost:8070 / apex began.
  December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized
  at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
  at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
  at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
  at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
  at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
  at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
  at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
  at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)
  
  
  December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
  at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)

  Hello

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.

  Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
  It is in any case, he started on Linux, so...

  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized

  This is the relevant part of your stack trace. You must call http://: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time.

  -Udo

• Stand-alone mode - scalability

  Hello
  
  We have an environment where we organize the listener of the APEX in stand-alone mode (on linux). Currently, it works on dev environments and test.
  The question is how to dimensionnera the independent auditor once we expose this to hundreds of users in the production environment?
  
  I know that the cost of not using a J2EE server is the management and control, but how to dimensionnera the independent auditor from deployment to a Web server?
  
  Brgds
  Martin B. Nielsen

  The stand-alone mode is only for development purposes. It is not intended for production use. You will need to use a proper application for the production server.

• Stand By Mode time setting

  How set you the mode on the S10 stand?  If I watch a video or something on there, the screen will Dim every minute or so and I have to use the touch pad to bring it back.

  Is it possible to adjust that? or just disable it when you watch a video there?

  Hello.. This could be help...

  Establishment of Lenovo

  cordially KalvinKlein

  -------------------------------------------------------------------------------------------------------

  You want more? For more information to get the most out of your machine S-Class

  Backup

  Windows 7

  Clean install of XP

  Starting XP

  Guide to WebCam

  Lenovo easy Capture

• BlackBerry Smartphones stand-alone mode

  Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane?  It allows the unit to be on, but calls or e-mails aren't coming through.

  Welcome to the forums.

  Yes, you can simply turn off the wireless.  Click on icon to manage the connections, then click on disable all connections.

  When you land, go back and click on enable all connections on.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• VAPP start not allowed in stand-alone mode

  Hello

  I encountered a problem while trying to create a paralytic by vCloud web gui. He created in fact very well, but at the start it says "Mode is not supported on a stand-alone host." What it means? How can I solve this problem?

  Thanks in advance

  fejese

  You have 2 + ESX(I) hosts and DRS is enabled on all hosts?

• Reporter mode physical log shipping standby when you apply the patch

  I apply a (Group of hotfixes) processor for a dataguard primary and physical shall help Doc-ID 278641.1 . I need to temporarily stop archivelog shipment from primary to standby. The documentation gives this example of order:
  
  ALTER system set log_archive_dest_state_X = reporter brought = the two sid ='* '
  
  Where X is the number of destination used for shipment of recovery for the backup site.
  
  So, what is the X? In online research, the answer is almost always Log_archive_dest_state_2. Questioning primary school, 2 is idle and waiting seems to be on 1, so I think I use 1. Which should I use?
  
  On the primary:
  
  Select the State, nom_dest, DESTINATION of v$ archive_dest where status = "VALID";
  
  VALID
  LOG_ARCHIVE_DEST_1
  prod1s
  
  VALID
  LOG_ARCHIVE_DEST_10
  USE_DB_RECOVERY_FILE_DEST
  
  view the log_archive_dest_1 setting;
  
  Log_archive_dest_1 SERVICE string VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE) prod1s = LGW R SYNC AFFIRM DB_UNIQUE_NAME = prod1s
  
  LOG_ARCHIVE_DEST_10 string LOCATION = USE_DB_RECOVERY_FILE_DEST REQUIRED
  
  
  view the log_archive_dest_state setting
  
  VALUE OF TYPE NAME
  ------------------------------------ ---- ------------------------------
  log_archive_dest_state_1 ENABLE stri
  NG
  log_archive_dest_state_10 ENABLE stri
  NG
  LOG_ARCHIVE_DEST_STATE_2 ENABLE stri
  NG
  activate log_archive_dest_state_3 stri
  NG
  activate log_archive_dest_state_4 stri
  NG
  activate log_archive_dest_state_5 stri
  NG
  activate log_archive_dest_state_6 stri
  NG
  activate log_archive_dest_state_7 stri
  NG
  activate log_archive_dest_state_8 stri
  NG
  activate log_archive_dest_state_9 stri
  NG
  
  
  On the physics of the day before:
  
  Select the State, nom_dest, DESTINATION of v$ archive_dest where status = "VALID";
  
  VALID
  LOG_ARCHIVE_DEST_2
  prod1
  
  VALID
  LOG_ARCHIVE_DEST_10
  USE_DB_RECOVERY_FILE_DEST
  
  VALID
  STANDBY_ARCHIVE_DEST
  USE_DB_RECOVERY_FILE_DEST
  
  view the log_archive_dest_ setting
  
  LOG_ARCHIVE_DEST_10 string LOCATION = USE_DB_RECOVERY_FILE_DEST REQUIRED
  SERVICE string LOG_ARCHIVE_DEST_2 = VALID_FOR (ONLINE_LOGFILES, PRIMARY_ROLE) = prod1 LGWR
  SYNC AFFIRM DB_UNIQUE_NAME = prod1
  
  view the log_archive_dest_state setting
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  log_archive_dest_state_1 string DAVID
  log_archive_dest_state_10 string ENABLE
  allow the chain of LOG_ARCHIVE_DEST_STATE_2
  allow the chain of log_archive_dest_state_3
  allow the chain of log_archive_dest_state_4
  allow the chain of log_archive_dest_state_5
  allow the chain of log_archive_dest_state_6
  allow the chain of log_archive_dest_state_7
  allow the chain of log_archive_dest_state_8
  allow the chain of log_archive_dest_state_9
  
  DataGuard with physical standby
  DB to: 10.2.0.4.0
  No RAC, ASM or DG broker
  
  Published by: JJ on May 2, 2012 10:05
  
  Published by: JJ on May 2, 2012 10:05

  Hello;

  You want this

  ALTER system set log_archive_dest_state_2 = reporter; (you need to do to your log_archive_dest_state_n) DEST ID that apply to your system (looks like 2 also)

  I'll post my full how patch is here a moment.

  0. Disable log shipping from the Primary
  1. Shutdown Standby
  2. Install patch on Standby software only
  3. Startup Standby in recovery mode (do NOT run any SQL at the standby)
  4. Shutdown Primary
  5. Install patch on Primary
  6. Run SQL on Primary
  7. Re-enable log shipping
  8. Monitor the redo apply from Primary to Standby --- this will also upgrade the Standby 
  
  See Oracle support article : How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]
  

  Please consider old questions of closing some of you.

  Best regards

  mseberg

  Published by: mseberg on May 2, 2012 09:16

• set the optimizer mode for mapping

  How can I set the the optimizer mode (for example, "all_rows") explicitly for a mapping?
  
  ~ Prabha

  Hello

  in the design center, select "configure" in the context menu of a mapping. Under operators table, select a table, and then set the indicator of extraction.

  Kind regards
  Carsten.