Stand By Mode time setting

Similar Questions

• Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Depending on your mode, I loaded down and insatalled and executed. But he doesn't not started and signed "check internet connection and time setting". Internet and the setting of the time are correct.

  Please let me know how to start.

  Please try to follow: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• locked mode is set at six and locked for a long time

  Hi good moring.i have a problem, can you help me, thanks

  Oracle 10 g windows 2003 Server

  I found a lock, lock mode is set at six, it makes me surprised, he blocked for several hours.

  and I get the sql code:

  updating seg$ set type #=: 4, blocks =: 5, extensions =: 6, minexts =: 7, maxexts =: extsize 8, =: extpct 9, =: 10, user #=: 11, iniexts =: 12, lists = decode (: 13, 65535, NULL,: 13), groups = decode (: 14, 65535, NULL,: 14), = cachehint: 15, hwmincr =: 16, spare1 = DECODE (: 17, 0, NULL,: 17), scanhint =: where the 18 ts #=: 1 and folder number =: 2 and block #=: 3

  can you tell me what caused it and how to fix?  I think that mode 6 locking is very...

  Thank you.

  Select sid, serial #, sql_id, last_call_et, situation, event, State, seq #, seconds_in_wait, p1, p1text

  session $ v

  where sid = 121

  Run the query several times and see the EVENT, STATE, SECONDS_IN_WAIT, P1 and P1TEXT

  SECONDS_IN_WAIT would show how long the session waiting for the current wait event.

  EVENT is the event of waiting.

  Is that it is pending or WAITED last (on the previous wait - that would be the EVENT)

  SEQ # would be incremented for each new expectation.

  Hemant K Collette

• Flexconnect AP stuck in stand-alone Mode

  Hi all

  I have all my APs configured under flexconnect at the remote site.

  I have one controller at the head office.

  There are two redundant links of MPLS from the main office to the remote site.

  Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.

  I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .

  But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).

  Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!

  There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.

  If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.

  HTH

  Rasika

• Try to get the listener to the APEX to run in stand-alone mode

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
  
  Thank you!
  
  Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
  NEWS: Check out: /home/oracle/apex_listener/apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  INFO: Extraction to: / tmp/apex
  INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
  INFO: From Embedded Web container: / tmp/apex
  December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
  INFO: http://localhost:8070 / apex began.
  December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized
  at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
  at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
  at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
  at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
  at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
  at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
  at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
  at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)
  
  
  December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
  at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)

  Hello

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.

  Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
  It is in any case, he started on Linux, so...

  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized

  This is the relevant part of your stack trace. You must call http://: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time.

  -Udo

• After the stand-by mode screen turns green or the GET messy graphics - Satellite M100-165

  When I leave my phone for more than 20 minutes on the stand of mode and I try to turn it on again the screen turns green or the graphics be annoying.
  In order to work, I have to reset and turn it back on. Does anyone know what I can do about it?
  Thanks in advance.

  Hello

  This problem occurs since the first day? Is your unit a clean install of the OS to factory settings?

• Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Hello Pidcock,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.

  I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Limitation period for H-HARVEST stand-alone mode

  Hello

  We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.

  Y at - it any reference to show?

  Concerning

  Luis Noriega

  Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Windows 7 sleep mode is set for 30 minutes, but turns off after 30 seconds or so when I'm online

  My mother's computer sleep mode is set for 30 minutes, but it keeps complaining that when she's online, the screen keeps blacking out all 30 seconds or more and she has to move the mouse to retrieve.  Any suggestions on how to fix this?  She uses firefox as browser.

  Cindy

  Also, check the screen saver settings.

  Right-click on the empty desk

  Select Customize

  Select the screen saver at the bottom right

  Set it to None and uncheck the box "on resume, display the logon screen"

  Does this solve the problem?

• In stand by mode physical map?

  Hello

  I am running vSphere Server version 5.1.0 (build 799731).

  All my ESXi hosts have version 5.1.0 799733.

  I noticed that on some on my ESXi hosts, one of the physical card for the vMotion VMkernel oucederomsurlesecondport IDE, is in stand by mode, but the other physical card is in normal mode.

  I have attached a screendump of the question.

  Can you help me explain this?

  Kind regards

  Carl-Marius

  Assuming that the two uplinks are configured properly, the usual configuration would be to have two active uplinks to the vSwitch and override settings in the groups of ports. For example vmnic0 active/vmnic1 stand-by for the management and vmnic1/vmnic0 active waiting for vMotion. In this way both management vMotion having their affair rising dedicted unless there is a failure of the link.

  André

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Stand-alone mode - scalability

  Hello
  
  We have an environment where we organize the listener of the APEX in stand-alone mode (on linux). Currently, it works on dev environments and test.
  The question is how to dimensionnera the independent auditor once we expose this to hundreds of users in the production environment?
  
  I know that the cost of not using a J2EE server is the management and control, but how to dimensionnera the independent auditor from deployment to a Web server?
  
  Brgds
  Martin B. Nielsen

  The stand-alone mode is only for development purposes. It is not intended for production use. You will need to use a proper application for the production server.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Is it possible to change my time zone time setting?

  Hello

  Can someone tell me if it is possible to change my zone setting of one selected during initial installation, when I first turned new computer?

  Hello

  Yes, you can change the settings.

  Go to control panel to command-> date & time-> change of time zone.

  Here you choose your time zone location.

  Apply the changes.

  Here :)