VAPP start not allowed in stand-alone mode

Similar Questions

• Try to get the listener to the APEX to run in stand-alone mode

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
  
  Thank you!
  
  Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
  NEWS: Check out: /home/oracle/apex_listener/apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  INFO: Extraction to: / tmp/apex
  INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
  INFO: From Embedded Web container: / tmp/apex
  December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
  INFO: http://localhost:8070 / apex began.
  December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized
  at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
  at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
  at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
  at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
  at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
  at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
  at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
  at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)
  
  
  December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
  at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)

  Hello

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.

  Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
  It is in any case, he started on Linux, so...

  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized

  This is the relevant part of your stack trace. You must call http://: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time.

  -Udo

• Limitation period for H-HARVEST stand-alone mode

  Hello

  We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.

  Y at - it any reference to show?

  Concerning

  Luis Noriega

  Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1241304

  http://www.Cisco.com/en/us/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1229985

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Stand-alone mode - scalability

  Hello
  
  We have an environment where we organize the listener of the APEX in stand-alone mode (on linux). Currently, it works on dev environments and test.
  The question is how to dimensionnera the independent auditor once we expose this to hundreds of users in the production environment?
  
  I know that the cost of not using a J2EE server is the management and control, but how to dimensionnera the independent auditor from deployment to a Web server?
  
  Brgds
  Martin B. Nielsen

  The stand-alone mode is only for development purposes. It is not intended for production use. You will need to use a proper application for the production server.

• Mode conversion controller in stand-alone mode in cisco 1702

  I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

  Run this command to convert:

  # swarm - Standalone mode
  # reload

  I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

  Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

  Here are the files I'm looking for?

  Help, please.

  This original link can cause a headache for an Aruba AP which is different.

  Try this method:

  https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

  The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

  This second link is light which means the controller-based and you don't want that for this scenario.

  See you soon,.

  Ric

• Flexconnect AP stuck in stand-alone Mode

  Hi all

  I have all my APs configured under flexconnect at the remote site.

  I have one controller at the head office.

  There are two redundant links of MPLS from the main office to the remote site.

  Now the question is, whenever my MPLS does a failover to the redundant link, all my flexconnect that aps disappear from the controller.

  I understand that this is due to the clock pulse is expired and the AP in stand-alone mode .

  But the APs flexconnect take a terribly long time to spend in connected mode, once flipping over MPLS (which is usually half a minute max).

  Infact he takes so long that I have to manually close/reset switch-ports (POE) on which all the access points on the remote site are connected!

  There are some adjustments that I'm missing here? or do I have I'll upgrade my firmware? By the way, my controller is currently on S/W ver: 7.4.121.0.

  If you have a test controller, you can test it with a different code of the WLC software. Otherwise reach TAC Cisco and see known issues with this code on it.

  HTH

  Rasika

• BlackBerry Smartphones stand-alone mode

  Is there a stand-alone for the BlackBerry 8330 mode so I can listen to music or play video games while plane?  It allows the unit to be on, but calls or e-mails aren't coming through.

  Welcome to the forums.

  Yes, you can simply turn off the wireless.  Click on icon to manage the connections, then click on disable all connections.

  When you land, go back and click on enable all connections on.

• Conversion of Cisco Aironet 1130AG light in stand-alone mode

  Hello

  I just bought AIR-LAP1131AG. Unfortunately, I want stand-alone and not lightweight fashion.

  Yes, is there a procedure to convert to "AIR-AP1131AG?

  Thank you.

  Hello Michael,

  Yes, please follow this procedure for TFTP Re-imaging

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  1) Go to your Computer and from the tool menu -> folder options ->uncheck the hide extensions for known file types option. 

  2) Download the IOS image ( you can get this ios image from cisco.com) on your desktop.

  3) Rename the image into c1130-k9w7-tar.default

  4) Give your computer Ethernet an address in the range 10.0.0.2 till

  10.0.0.30

  5) Run the tftp server on your computer.

      - Make sure that the directory of your tftp server is the desktop.

      - Specify the AP address on the tftp server if needed.

  6) Connect the AP to the computer with Ethernet cable.

  7) Remove the power from the AP.

  8) Press and hold Mode button on the AP, and insert the power jacket in the AP.

  9) Keep pressing on the Mode button for (20-30 seconds) until you see RED Led.

  10) Wait until the image installed and all led lights return to green 

  doesn't make sure that no firewall or antivrus is running on your computer.

  I hope this helps.

  Kind regards

  Talal

  =============

  Please note the answers that will help you

• Why don't Adobe make it clear that the Dehaze tool does not work with stand alone Lightroom 6?

  I upgraded to LR 6 because of the Dehaze feature only to find out after that I bought that is not available without subscription of the CC. Very disappointed. Why isn't this clearly from the beginning. ???

  It was clarified at the beginning, to the official announcement of Lightroom 6.1/Lightroom CC 2015.1 https://blogs.adobe.com/lightroomjournal/2015/06/june-updates-to-cc-photography.html

  It lists the features currently available in Lightroom CC (which isn't Lightroom 6), and there is an asterisk next to Dehaze, the asterisk is said "Please note that these features are not available in the stand-alone version of Lightroom 6.1."

  Is that clear enough?

• Please help us to solve the problem in the subject MXE3500 RN with stand-alone mode

  Dear all

  My command team MXE3500 with node resource. 5, in fact, we would use as standalone, but I can't access http://x.x.x.x/mxeui.

  Is the node of resource able to run on the standalone device? or use the resource instread Manager

  Best regards

  Boonpot

  Node resource must be associated with a resource manager.  Only resource managers can be stand-alone.

• My hp photosmart C4680 will not go into stand by mode

  My printer will go in standby mode it prints blank pages approximately every 10 minutes and goes on all day and night the only way to stop is to turn off the printer. Has only started doing the last two weeks. Have rebooted and makes no difference. Anyone know what I can do to stop it.

  Hello Lollypop123,

  Welcome to the HP Forums.

  Generally, when this kind of problem happens, it has to do with a problem of power or in most cases, are missing.

  Please make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  When the printer is connected to a wall outlet, and it is running back, please use the power button to do a proper feeding cycle.  This will make a partial reset on the printer.

  You are more than welcome to write me again if you have any other questions or if the troubleshooting does not help to solve your problem, I suggest you then call HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• Security admin in stand-alone mode, Essbase 11.1.2.2 user

  Hello gurus,

  Can someone shed some light on how the security is stored for the admin user if Essbase is configured/deployed in standalone mode?

  We have configured Essbase in standalone mode, but in the face of the question while connecting to essbase MaxL.

  We tried with admin/password, but - Error Invalid credentials.   (Is there a different default password for the admin user?)

  So it was just curious to know how/where is check Essbase/MaxL to validate the credentials.

  TIA,

  Santy.

  affecting the admin user in the EssbaseConfiginfo.properties, then by removing all the .sec and dry backup, start essbase, can identify you with the new admin user and password.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Nikon D500 NAVE is not compatible with stand-alone (not CC) Lightroom 6.0 - how to upgrade to 6.5?

  I took off with my nice new D500 but I can't download the pictures to my standalone (not CC) 6.0 of Lightroom.  I see the update to 6.5 works with the NAVE D500 files, but how can I update my Lightroom for who?  I tried help > update, but it says it's updated.  Which is not the case.

  I use OS 10.10.5 if it's important.

  Help, please!

  Well, four hours of 'cat' helps later (three with completely useless people and finally a useful person), one phone call, a remote control of my computer, including several reboots - Adobe finally got installed 6.5.1.

  I hope that I have never go through this again.  If I do - that's it for Lightroom.  There must be a better way.

• How to accumulate vSphere 5.5 (or 5.1) of the Earth? (If you do not have a stand-alone client)

  This can be a very basic question, but I wonder if these conditions have been met:

  1. you gave with bare metal resources (with complete listing of virtualization server hardware)

  2 client/customer wants a 'all ' virtual environment (so including vcenter, secondary AD/DNS, database servers, etc.)

  3. primary DNS must be on a server (standalone) bare metal as shown.

  Before vSphere 5.5/5.1, (my) would be to

  1. install a single ESXi host,.

  2 install vmware client on a laptop Desk/computer

  3 to connect to the first host

  4 build virtual machines for AD/DNS secondary servers and the database server required (SQL for example) as VMs.

  5 build vCenter server (and other requirements)

  6 build other esxi hosts

  7. Complete/Build of the cluster

  8. Migrate/move the primary VMS (vcenter, AD/DNS) to cluster (with technical details applied)

  How it should be done in vSphere 5.5 (5.1)?

  If you are using an older version (5.0 or 5.1) for 5.5 access is what you will see. Some want to make already installed 5.0 or 5.1 it will appear

  

  This happens if you use your previously installed client. If you do not have any client installed in your environment with the new ESXi a 5.5 vsphere client will be given which can be used to access the server directly.

  It is possible by going to https:// after installing an ESXi 5.5. You will find an option called download vsphere client 5.5 which will connect to the internet and download a client.

  SSO is a module to be installed as part of your installation of vCenter. If you are installing vCenter using a simple installation, it will install SSO service inventory, vSphere client Web (access to vcenter via a web browser) and vCenter server.

  After installing SSO and vcenter you can add your advertisement as a source of authentication to your vCenter.

  This is not to be confused, but if you plan to go with vSphere 5.5 in most functions in vSphere client is disabled and you use Vsphere web customer to make the most of management activities.

  vSphere Web Client Demo - YouTube   If you are new customer Web. This will help you.

• Error in stand-alone mode

  Hello
  
  When I run the first listener to apex of time I could go to the Application Express administration Page, after reboot, I have this error:
  
  
  C:\oracle\product\apex_listener.1.1.2.131.15.23 > java - Dapex.port = 6565 - Dapex.hom
  e = c:\apex_listener-jar apex.war
  NEWS: Check out: C:\oracle\product\apex_listener.1.1.2.131.15.23\apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  NEWS: Check out at: c:\apex_listener
  INFO: Using classpath: file:/c:/apex_listener/apex/___embedded/start.jar:file:/
  c:/apex_listener/Apex/Web-INF/lib/apex.jar:file:/c:/apex_listener/Apex/Web-INF/l
  IB/Commons-FileUpload-1.2.1.jar:file:/c:/apex_listener/apex/Web-INF/lib/je-4.0.1
  03.jar:file:/c:/apex_listener/Apex/Web-INF/lib/ojdbc6.jar:file:/c:/apex_listener
  /Apex/Web-INF/lib/ojmisc.jar:file:/c:/apex_listener/Apex/Web-INF/lib/POI-3.6-200
  91214.jar:file:/c:/apex_listener/Apex/Web-INF/lib/UCP.jar:file:/c:/apex_listener
  /Apex/Web-INF/lib/xdb-11.2.0.jar:file:/c:/apex_listener/Apex/Web-INF/lib/xmlpars
  erv2 - 11.2.0.jar:
  INFO: From Embedded Web container: c:\apex_listener
  2011-06-30 14:40:07 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=c:\apex_listener\apex\WEB-INF\web.xml
  2011-06-30 14:40:08 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=c:\apex_listener\apex\WEB-INF\web.xml
  2011-06-30 14:40:09 com.sun.grizzly.http.servlet.ServletContextImpl initListener
  s
  SEVERE:
  Oracle.DBTools.RT.x3p.impl.X3PParseException: ParseError at [row, col]: [1,3]
  Message: Markup declarations contained or pointed to by the type of document
  statement must be well-formed.
  at oracle.dbtools.rt.x3p.impl.StAXEventIterator.wrap (StAXEventIterator.j
  AVA: 94).
  to oracle.dbtools.rt.x3p.impl.StAXEventIterator.access$ 000 (StAXEventIter
  Ator.Java:27)
  to oracle.dbtools.rt.x3p.impl.StAXEventIterator$ XMLEventIterator.advance
  (StAXEventIterator.java:116)
  to oracle.dbtools.rt.x3p.impl.StAXEventIterator$ XMLEventIterator.advance
  (StAXEventIterator.java:97)
  at oracle.dbtools.rt.util.AbstractIterator.next (AbstractIterator.java:28
  )
  at oracle.dbtools.rt.util.M2NIterator.srcNext(M2NIterator.java:58)
  at oracle.dbtools.rt.util.M2NIterator.process(M2NIterator.java:39)
  at oracle.dbtools.rt.util.VariableIterator.advance (VariableIterator.java
  (: 25).
  at oracle.dbtools.rt.util.AbstractIterator.start (AbstractIterator.java:4
  7)
  at oracle.dbtools.rt.util.AbstractIterator.hasNext (AbstractIterator.java
  (: 20).
  to oracle.dbtools.rt.x3p.impl.Chain$ EventIterator.advance (Chain.java:100
  )
  to oracle.dbtools.rt.x3p.impl.Chain$ EventIterator.advance (Chain.java:75)
  
  at oracle.dbtools.rt.util.AbstractIterator.start (AbstractIterator.java:4
  7)
  at oracle.dbtools.rt.util.AbstractIterator.hasNext (AbstractIterator.java
  (: 20).
  at oracle.dbtools.rt.x3p.impl.X3PReaderAdaptor.next (X3PReaderAdaptor.jav
  a: 29)
  at oracle.dbtools.apex.config.ApexConfigSerializer.read (ApexConfigSerial
  Izer.Java:46)
  at oracle.dbtools.apex.config.ApexConfig.init(ApexConfig.java:158)
  at oracle.dbtools.rt.web.SCListener.contextInitialized (SCListener.java:3
  3)
  to com.sun.grizzly.http.servlet.ServletContextImpl.initListeners (Servlet
  ContextImpl.java:152)
  to ___bootstrap. MimeTypesServletContext.initListeners (MimeTypesServletC
  ontext. Java:28)
  to com.sun.grizzly.http.servlet.ServletAdapter.configureServletEnv (Servl
  etAdapter.java:465)
  at com.sun.grizzly.http.servlet.ServletAdapter.start (ServletAdapter.java
  (: 281)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.start (GrizzlyAdapterCh
  Ain.Java:118)
  at com.sun.grizzly.http.SelectorThread.initEndpoint(SelectorThread.java:)
  1126)
  at com.sun.grizzly.http.SelectorThread.listen(SelectorThread.java:1177)
  at com.sun.grizzly.http.embed.GrizzlyWebServer.start (GrizzlyWebServer.ja
  will: 585)
  to ___bootstrap. Deployer.Start (deployer. Java:276)
  at ___bootstrap.___Bootstrap._start(___Bootstrap.java:41)
  at ___bootstrap.___Bootstrap.start(___Bootstrap.java:163)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at ___embedded.___EntryPoint.invoke(___EntryPoint.java:299)
  at ___embedded.___EntryPoint.main(___EntryPoint.java:95)
  Caused by: javax.xml.stream.XMLStreamException: ParseError at [row, col]: [1,3]
  Message: Markup declarations contained or pointed to by the type of document
  statement must be well-formed.
  to com.sun.org.apache.xerces.internal.impl.XMLStreamReaderImpl.next (Unkn
  own Source)
  at com.sun.xml.internal.stream.XMLEventReaderImpl.nextEvent (unknown safe
  This)
  to oracle.dbtools.rt.x3p.impl.StAXEventIterator$ XMLEventIterator.advance
  (StAXEventIterator.java:108)
  ... 32 more
  2011-06-30 14:40:09 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Thu Jun 30 14:40:09 EST 2011
  INFO: http://localhost:6565 / apex began.
  
  
  I tried without it - Dapex.port = 6565 and - Dapex.home = c:\apex_listener but error still appears.
  
  Windows XP Prof
  JDK 1.6.0_26

  Hi Andy,.

  I think that this error was triggered due to a failure of Oracle servers that contain the schema definition for validation.
  The two http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd URLS have been temporarily low today but shows a splash screen, for schema validation failed.
  Currently, the system seems to be again. Could check you if it still works?

  -Udo

  P.S.: Similar problem: {: identifier of the thread = 2246333}