Inateck USB 3.0 HD Dock questions - iMac, retina - 27 "(end of 2015)

Similar Questions

• iMac (retina 5K, end of 2015) in 64 bit mode?

  How can I tell if my iMac (retina 5K, end of 2015) runs in 64-bit mode or not?

  10.11.6 OS

  Y at - it software that would let me set it to 64 or 32?

  Thank you.

  Mac

  All iMacs for years past were 64-bit, yours is. I believe that there is evidence in the application of the information system, but you will need to do some research.

• iMac 4 k (end of 2015) photoshop screen flashing problem/bug

  Hello

  I'm a Retoucher, so I use Adobe Photoshop to do my job.

  Recently, I bought a new iMac 21.5 (end of 2015) with the cool Retina display 4 k.

  Configuration:

  OS X El Capitan

  Version: 10.11.3 (15 d 21)

  iMac (retina 4K, 21.5 inches, end of 2015)

  Processor: 3.1 GHz Intel Core i5

  Memory: 8 GB 1867 MHz DDR3

  Graphics card: Intel Pro Iris Graphics 6200 1536 MB

  But the happiness was gone soon after the installation of Adobe Photoshop and trying to do my job. The fact is that I found a disgusting bug. My screen goes black / begins to blink/flicker (the video is here - https://youtu.be/D-5dF3dvYmM).

  First my thought was - maybe it's a problem with the combinations of keys or graphics tablet. Then I turned off the Tablet and checked the shortcut key settings and tried once more - the problem has not disappeared.

  Then I tried to repeat the bug. I realized that there are not any sequence of actions. Screen flickers randomly. But I noticed - fact screen to browse more often (when you use the tools brush or pad), pressing CMD, SPACE, the [] keys.

  The next step was Google. I found a lot of these questions:

  https://discussions.Apple.com/thread/7349449

  https://discussions.Apple.com/thread/7401844

  https://discussions.Apple.com/thread/7370586

  https://forums.Adobe.com/message/8289188

  https://forums.Adobe.com/message/8337985

  https://forums.Adobe.com/message/8353487

  https://forums.Adobe.com/message/8252309

  https://forums.Adobe.com/message/8392296

  https://forums.Adobe.com/message/8157454

  I have already tried:

  (1) different combinations of the parameters of the advanced graphic processor - nothing has changed

  (2) passing off the coast of the use of the GPU - nothing has changed

  (3) update to my OS x to the latest version - nothing has changed

  (4) update Adobe Photoshop to the latest version - nothing has changed

  (5) restore default settings PS - nothing has changed

  There is ONLY a SINGLE REALLY WORKING solution - https://www.youtube.com/watch?v=8aGJBafQWTg

  + Chris Hong Here is a very ugly solution - I realized that this issue only happens when my cursor for eraser size is too large. I just went into preferences > slider and make the precise cursor. He stopped the issue of flashing. Although it makes the little hard work on photoshop.

  
  

  It's really worked, but done PS is usless to me (and as I understood it too for many users of the new iMac 4K).

  I tried to make a comeback to the iMac, but my dealer Apple told me that it is software problem, so that they can't return to my iMac and get a refund.

  Dear Apple or Adobe,

  Please solve this terrible problem.

  I look forward to your response and resolution of my problem.

  Thank you.

  Yours faithfully,

  Alyona

  PS Sorry for my English.

  Hello

  I have the same problem with my iMac nine 4K, the latest version of the operating system and Photoshop was last updated.

  I've contacted Apple and Adobe, but Adobe has no answer for us, and Apple says it's a software problem, Adobe has to solve.

  The really unique solution for not having the flashing black screen is the one you posted, made a comment on a Youtube video: set the cursor as "accurate".

  I agree with your prayer: Please Adobe and Apple fix this bug!

  Tatiana

• iMac (27 inch, 5 retina k, end of 2015) startup problem

  I am currently using late 2015 5 k retina 27-inch iMac.

  My iMac doesn't always dΘmarre as expected. There will be a start-up chime, but the screen just remains completely black. It takes sometimes more than 5 minutes to start magically after freezing to the black screen. And when I managed to connect, my mouse (USB) could freeze a few times. I downloaded Smoothmouse to kill the mouse acceleration.

  I tried to reset the SMC and the NVRAM, however it does not seem to solve the problem. I have faced this same problem after exchanging the 3 sets of iMac.

  Wondering if a defective mouse could be the cause of this problem? Or could it be the Smoothmouse. However, I still don't think that an iMac could be so vulnerable.

  Any help would be greatly appreciated! Thank you!

  I don't know if you're aware or not, but you have 90 days of free telephone support AppleCare. You should be in contact with Apple immediately. You can learn more about it by clicking One AppleCare Support

• I have a screen retina 5 k the iMac 27 inch end of 2015.

  I wanted to know how to watch 4 k video on youtube without first buffering the content. Is this normal or do I need to install more memory in it to watch a video in 4 k on youtube? He still has the 8 GB of memory that it came with.

  Buffering has more to do with the speed of connection than anything else. NetFlix recommends a minimum of 25 Mb/s to UHD. I guess that YouTube would be substantially the same.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• 10 Windows installed on my iMac (end of 2015). When in windows, I am unable to use the mouse.

  iMac 27 i7 (end of 2015) 16 GB Ram 1 TB Fusion Drive El Capitan

  I installed 10 Windows via Bootcamp.

  The installation actually windows I had to use the 'Tab' key and 'Back' button all the time.

  When it was finally installed, I found that I was not connected to the internet (WiFi) and also do not have a mouse or cursor.

  I downloaded "software of Windows Support for a 32 Gb USB Bootcamp Assistant.

  Began my iMac in Windows and under the tab 'options' button USB the Bootcamp folder, then Setup.

  Then, I got a message box...

  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access this item.

  I'm not brilliant with this sort of thing and now I am puzzled

  Any help will be greatly appreciated

  You probably have to go into Control Panel and add the mouse as a Bluetooth mouse for the computer

• Device USB 3.0, USB 2.0 connection ports of iMac

  USB 3.0 device not recognized: my iMac a 2011, 4 USB 2.0 ports.  I bought an external WD My Passport for iMac USB 3.0 external hard drive.  It is not recognized by the iMac.  The device works of WD - I plugged on new MacBook Pro from a friend and it worked in the USB 2.0 and USB 3.0 ports and on a newish iMac (I forgot to check the vintage).  How do I obtain backward compatibility so I can connect the WD USB 3.0 device to the iMac, USB 2.0 port?

  Data: operating system is current at El Cap 10.11.6. iMac (21.5 ", mid-2011) I've updated the installer of DW disk utilities, but that did not help.

  The device has been formatted as Mac OX extended (journaled) using disk utility. If not then of course it will not work, most drives come preformatted for need to be reformatted to work with your Mac and Windows boxes. BTW, have you considered buying a top quality case such as a Mercury Elite Pro (www.macsales.com), WD case aren't the highest quality and tend to have a high failure rate.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• 2015 iMac, retina and Apple Superdrive does not

  I bought a new iMac 21.5 inches (retina, end of 2015) El Captain 10.11.4 running.  I bought two (not 1) Apple SuperDrive, and none of them work on this iMac.  I took SuperDives both at the Apple Store and they cooked up their Macbook Pro or similar TIME without problem iMacs.  They tested BOTH of my SuperDrive with no problems. They said it seems that my iMac is the culprit. I came home and ran the Apple Diagnostics program (reboot and press D).  No problems have been found.  I checked the SystemsPreferences and when you connect, readers will appear under connected USB devices. But my iMac will not rise (i.e., it will not take any disc inserted). Am I missing a driver or software program? Am I missing an extension?  Really need to help my Apple community gurus to help me solve this problem. I can't believe this.

  Thank you

  Hello...

  "I checked the SystemsPreferences and when you connect, readers will appear under connected USB devices. But my iMac will not rise (i.e., it will not take any disc inserted). »

  It is possible, it is a question of power, then follow the instructions to reset controller (SMC) management system

• iMac (retina 5K, 27 inches, end of 2015) 1-2 second stops when you try to open or switch between applications

  1-2 second ago stops whenever I try to open an application or switching between applications. The animation of the application icon in the status bar at the opening of the starts, pauses for 1-2 seconds and ends before you open the application. When you click on an inactive application window it pauses for 1 to 2 seconds before making the active window. This only happens after a reboot. It takes about a day being initialized for this problem to occur.

  This does not seem like behaviour expected of such a new machine with charge card. All advice is appreciated.

  Here is my EtreCheck report:

  ***

  EtreCheck version: 2.9 (250)

  Report generated 2016-02-03 11:33:10

  Download EtreCheck from http://etrecheck.com

  Running time 01:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Computer is too slow

  Description:

  1-2 second ago stops whenever I try to open an application or switching between applications.

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  iMac (disk1) /: 999,33 (Go 652,85 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Western Digital my passport 071D 1 TB

  EFI (disk2s1) : 210 MB

  Boot OS X (disk2s3) : 134 MB

  Backup local (DIS3) Volumes/iMac/iMac local backup: 999,51 (Go 107,33 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.83 Go online

  Apple Inc. IPhone.

  Reader SuperDrive for MacBook Air Apple Inc..

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchAgents/com.support.com.PerUser.Nexusd.plist

  /Library/LaunchAgents/com.support.com.PerUser.Nexussrvd.plist

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]

  com [no charge]. Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]

  com [no charge]. RemoteControl.USBLAN.usbpart (2.0.6) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.netpart.Panther (1.6.1) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.usbpart.Panther (1.6.1) [Support]

  / System/Library/extensions/remotecontrol. USBLAN_usbpart.kext/contents/plugins

  com [no charge]. RemoteControl.USBLAN.panther (1.6.1) [Support]

  Launch system officers: ⓘ

  [loading] 148 tasks Apple

  [operation] 88 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.CS5ServiceManager.plist [Support]

  [loading] com.support.com.peruser.Nexusd.plist [Support]

  [failure] com.support.com.peruser.Nexussrvd.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.sonos.SonosLibraryServer.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.backblaze.bzbmenu.plist [Support]

  [failure] com.google.GoogleContactSyncAgent.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.spotify.webhelper.plist [Support]

  [loading] com.valvesoftware.steamclean.plist [Support]

  [operation] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist [Support]

  [operation] ws.agile.1PasswordAgent.plist [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Cinch Application (/ Applications/Cinch.app)

  Canon IJ Network Scanner Selector2 hidden Application (/ library/printers/Canon/IJScanner/utilities/Canon IJ Network scan Selector2.app)

  SizeUp Application (/ Applications/SizeUp.app)

  Dropbox application (/ Applications/Dropbox.app)

  The messages application (/ Applications/Messages.app)

  iTunes application (/ Applications/iTunes.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck

  [ongoing] com.getdropbox.dropbox.48992

  [ongoing] com.irradiatedsoftware.Cinch.151392

  [ongoing] com.irradiatedsoftware.SizeUp.12192

  [ongoing] jp.co.Canon.bj.scan.network.scannerselector2.90592

  jp.co.canon.bj.printer.app.MPNEX213.45792 [loading]

  [ongoing] JP.co.Canon.cijscannerregister.14112

  [ongoing] org.herf.Flux.49952

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: unknown

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  Default browser: Version: 601 - SDK 10.11

  SharePointBrowserPlugin: Version: 14.5.8 - SDK 10.6 [Support]

  Unity Web Player: Version: UnityPlayer version 5.2.0f3 - 10.6 SDK [Support]

  Silverlight: Version: 5.1.41105.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: update of Java 7 55 check version

  User Plug-ins internet: ⓘ

  WebEx64: Version: 1.0 - SDK 10.5 [Support]

  Web of Google Earth plugin: Version: 7.1 [Support]

  Safari extensions: ⓘ

  1Password

  Add to the list of Amazon gift

  InvisibleHand

  Little time

  PIN button

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  iMac: disc size: 999,33 GB disc used: 346,49 GB

  Destinations:

  The iMac HD Gallagher family backup local [Local]

  Total size: 999,51 GB

  Total number of backups: 82

  An older backup: 27/05/15, 12:54 AM

  Last backup: 03/02/16, 10:34

  Backup disk size: too small

  Backup size 999,51 GB< (disk="" used="" 346.49="" gb="" x="">

  Top of page process CPU: ⓘ

  140% nsurlsessiond (2)

  85% launchservicesd

  78% photolibraryd

  11% cloudphotosd

  9% com.apple.photomodel

  Top of page process of memory: ⓘ

  1.70 GB kernel_task

  1.12 GB launchservicesd

  1.12 GB cloudd

  Softwareupdated 492 MB

  Photolibraryd 229 MB

  Virtual memory information: ⓘ

  6.39 GB of free RAM

  26,00 used GB RAM (18,35 GB being cached)

  8 MB Swap used

  Diagnostic information: ⓘ

  3 February 2016, 11:31:58 /Library/Logs/DiagnosticReports/launchservicesd_2016-02-03-113158_[redacted].cp u_resource.diag [details]

  / System/Library/CoreServices/launchservicesd

  3 February 2016, 11:30:22 ~/Library/Logs/DiagnosticReports/iTunes_2016-02-03-113022_[redacted].crash

  com.apple.iTunes - /Applications/iTunes.app/Contents/MacOS/iTunes

  3 February 2016, 08:18:45 /Library/Logs/DiagnosticReports/nsurlsessiond_2016-02-03-081845_[redacted].cpu_ resource.diag [details]

  / usr/libexec/nsurlsessiond

  1 February 2016, 19:53:04 self-test - spent

  Hello Agent37,

  What are your settings of Photos? Looks like you have a ton of photos regenerate and transferring to iCloud. I've seen similar reports, but I'm not a heavy user of Photos. I'll see if I can move your question on the forum Photos: Photos for Mac

• iMac 5 k end of 2014 for the first time enable FileVault stuck Reboot

  Hi all

  I just got the FileVault on my iMac 5 k end of 2014 with fusion drive for the first time.  It is said that a restart is required. He could not restart and stuck on the black screen. No apple logo, nothing.

  Here are the steps I've tried

  1 restart by holding the power button and turning it back on

  2. reboot into recovery by now cmd + R Mode

  3. enter in disk utility

  4 did not have a first-aider for my drive of fusion

  5 tried by clicking file > open or remove encryption (both selections are greyed out)

  6. I tried to enter the Terminal. Typed in fdesetup disable (no command found, Ditto for sudo)

  7. click on the left upper Apple logo > disc start > selected my drive > chose Unlock > typed my password > selected reboot > same, stuck.

  I need help.

  Thanks in advance

  Hello. Please let me know if figure you it out. Your question sounds the same I am facing with my Mac mini (published earlier today). Turn on Filevault and all I get is a white screen.

• Boot Camp will not install on Windows 10 (end of 2015 imac)

  Bought an imac 27 "5K retina, end of 2015

  1 TB - (not the Fusion drive)

  OS X El Capitan

  All applications are updated on both OSX

  Version of Windows 10 Education loaded 64 bit ISO file (3 times 2 of 1 Flash of office)

  After loading Windows 10 - installation of Boot Camp program starts - but after a few minutes, I get a little window with a red X

  The installation stops (I tried the OK TWO hit and hit X to close small, then the windows in the "Installation")

  But no Boot Camp file is installed (worked with Apple Care - but they don't have any other suggestions.)

  How can I get the Boot Camp assistant on the Windows partition? I can't find Boot Camp 6 downloads anywhere.

  I don't have files from Boot Camp on side Windows to run (or disk Flash Drive)

  Windows runs and work THOUGH - I have questions - no sound, the mouse does not scroll, have not spent a lot of time to discover other issues.

  Another thing to NOTE - on the side of OS x with Boot Camp Assistant - I don't get always the choice to select tasks - that is not available - my boot camp assistant didn't need to start from a flashdrive (external drive) it will be the start of a download of office. I thought to use Boot Camp Assistant to load the ISO on the flash drive - but I do not get this option (select tasks).

  Any help is appreciated - is there an external way to download Boot Camp 6?

  1. What is your Windows language setting?

  2. you can get the drivers BC6 W10 from Apple.

  

• iMac 27 "retina (end of 2015) with target disk Mode Macbook Pro?

  Hello

  I am interested in buying an iMac 27 "5 k retina (end of 2015) my household has also two early 2011 15" Macbook Pro, which are still in use.

  I understand that this iMac no longer manages the target Display Mode. As I am unable to use the iMac as an external display for my Macbook, would it be possible instead, connect via Thunderbolt, a Macbook to the iMac, and access only to files hang when necessary?

  If this can complicate things, I am limited as to how I can custom configure how to buy the iMac 27 "(je serais d'acheter la base 27" iMac, avec 1 to de disque DUR). " I also intend on buying an external SSD that I would use to run/start the iMac, using the drive HARD internal to the iMac as ' dedicated local storage'otential

  EDIT: Would there be potential problems? I would be able to access just like I would if I say it, hooked to a USB key? If I was working on the files, I need to import them to the iMac or be able to work directly from the drive?

  Yes.

  (138665)

• Blinking cursor Windows 7 iMac, retina end-2014

  Hello

  I have problems with Bootcamp & Windows 7. I have:

  iMac (retina 5K, 27 inches, end of 2014)

  4 Ghz Intel Core i7 processor

  32 GB 1600 Mhz DDR3 memory

  Startup disk 500 GB Flash storage

  Graphics AMD Radeon R9 M295X 4096 MB

  Serial number d25PM0VSFY14

  10.10.4 OS

  51.14 Bootcamp & Windows 7

  I also have a surge protector and battery backup.

  It is the second time this has happened to me. I have Windows 7 installed on a partition on my hard drive. I primarily use Windows for work. I go back to my computer, after he went to sleep through the night and there is only a black screen with a blinking cursor.

  1 restart does not help. Windows starts to load and says "Windows Recovery" but then returns to the black screen and the blinking cursor.

  2 press and hold F8 does nothing.

  3. I installed a program of NTFS file and deleted the ATI drivers as another (old) suggested post. It did not set the issue.dd

  4. I restarted my key USB from Bootcamp/Windows 7, however, the keyboard and the mouse are dead when the Windows Setup screen appears.

  The Mac partition continues to operate correctly. Any help would be GREATLY appreciated. The first time that this has happened, I finally gave up and had to wipe the HD, reinstall Windows and all software. I lost at least a whole day of work because of this. I'd really, really prefer not to have to reformat again - especially because it seems that this could happen just once again. Is this a known issue with the display and Windows 7 drivers?

  Help, please!

  Thank you

  Dan

  1. do you have any active Windows automatic updates?

  2. There are a lot of issues with sleep/hibernation on W7. You have an active Windows system restore point?

  3. you have any software NTFS third side OSX or Windows, that allows read-write access to partitions?