Incorporation of an audio recorder in captivate

Similar Questions

• audio recording in Captivate 8 for a single slide

  When I save a little short tutorial with Captivate 8 for a particular slide, where is he? I am not given a chance to name it, and I don't know where he's going. Typical fool in question, no doubt, but I'm stumped. ??

  Thank you very much!

  Look in the library, Audio file. It has a generic name, but you can rename it.

• Add audio to 8 Captivate

  Hello world

  Wanted to ask what are the general approaches of the people to the add audio to 8 Captivate?

  I think it's quite long and counterproductive to add a voiceover full record for an entire project and divide by the slide markers. Captivate only really seems like you're doing this 'once', as when you save, all lengths of slides are changed to the length of the audio.

  The best way I found is to edit and export clips in Adobe Audition, and then import them on a slide-by-slide basis. Even if this is a bit problematic if you have audio to extend across multiple slides in a software simulation.

  Thanks in advance for your comments,

  Ben

  Hi Ben,

  I prefer to save in hearing myself (control freak), but will also create separate audio clips, one for each slide. I'll import to library, then drag each of them to the slide in the case of slide audio. Good labelling helps a lot.

• Audio record control never renders on the screen

  System:

  Windows 7

  Adobe captivate 5.5

  On a laptop

  Problem:

  At work, I have second dacking and monitor\ stations.  Plug my laptop into a docking station.

  Open captivate and slide deck, choose it Audio > Rrcord > zip

  Opens the control of audio - I want to save.  everything is fine.

  Eject from the docking station, tried to use portable Captived on any computer (no dock, no attached monitor)

  Select Audio > recording > zip

  No recording control window, the window in captivity is there but all the disabled buttons.  Press ESCAPE - caprivate window buttons to reactivate.

  Togle window to see if there was a hidden window - not good

  Resized screen - not good

  Made sure to disconnect it from the projector (fn + f7) - not good

  not rebooted - no good

  not rebooted - no good

  Tried the configs different montor - not good

  Are gone home, I tried my monitor at home with an another docking station

  does the same things as before - not good

  Nothing.

  Return to work - works fine.

  I can't do all the rocrding at work that my office is too noisey.

  Help?

  Hello

  I had similar problems after having cut a second monitor. Captivate seems to leave some dialog boxes on the second monitor which is no longer there. Before disconnecting (at College) of the second monitor I check if everything is once again on my main screen (laptop computer =) and then no problems. But now, I am confused, as if I forgot (which I did yesterday), I connect another second monitor, extend my desktop to this monitor and can't seem to drag everything back to the main screen. It seems to be a different configuration with your docking station.

  Lilybiri

• Audio recording is no longer works in Cap5 - ideas?

  I created a presentation and audio recording in several ways (Audio - recording - slide) (the Audio icon in the taskbar).

  Yesterday, I opened the Captivate and these two options don't work anymore.  I do not mean that I can't save.  I mean I can't access the screen in the software that lets you record.

  Registration generally works very well - I record in Audacity.  This isn't a problem of Windows (XP) or an entry problem or a hardware problem.

  Everything else works in Captivate.

  Audio of the previously saved slide sets.  I just can't save.   After using the above option, Captivate freezes and I need to click ESC to unlock.

  I know, it's weird.  If you don't believe me, look here.  Let me know if you see me something wrong while you're there.

  http://screencast.com/t/0fsLsR5Lh

  So, I did what anyone facing a weird isolated software problem would do.  I reinstalled Captivate.  Today, same problem.

  Help?  Any ideas?  I do the final changes on my project, there is a delay, etc., etc.

  First thing to try is empty the cache using the key in the preferences.

  If this does not resolve the issue, you can try closing Captivate and delete the Preferences file itself.

  On Xp, it is located at: C:\Documents andSettings\Application Data\Adobe\Captivate 5 Settings\

  Captivate will re-create this folder next time it starts, but settings preference, you have done will be lost.

  Additionally, make sure that you have installed all the updates and patches.

• Recording in Captivate 3

  I'm looking for more details on how Captivate 3 has "improved" audio recording.
  
  Can you change an existing record by recording a new sentence and insert or replace a section of an existing audio file?
  
  Can you change the calendar to a record that was previously spread over 3 slides, while it is now spread over 4 slides?
  
  

  There's no real problem other than a beginner who has gone through the tutorials and never saw these specific things demonstrated. I don't see how they work now.

  Thank you, Steve

• a fusion drive is good for audio recording?

  I think buy a 27-inch iMac for audio recording on Logic Pro X, but is not sure a merger player performance, because some say that the part of the HARD of it on only 5400 RPM drive, if I hold with an iMac HARD 7200 RPM drive?

  You will likely get different opinions, but personally I would not use the fusion drive and recommend an SSD.

  Quite significant speed difference.

• Siri and audio recording does not

  Hello

  the audio recording with my front camera does not work and Siri cannot hear what I say.

  All the other stuff that needs a microphone works perfectly and I installed the latest version of IOS

  Hope someone has an answer to this problem

  Vanessa

  Hello

  Try following the steps outlined here:

  • Get help with microphones on your iPhone, iPad and iPod touch - Apple Support
  • Siri to use on your iPhone, iPad or iPod touch - Apple Support  (see 'Get help').

• The logic using Soundflower audio recording system

  Let's start with the agreement that I must be a fool.

  I found tutorials on the net for logic audio recording using sound flower and it seems very simple.

  I actually have to make what I want sometimes.

  For the life of me I can't recreate my past successes.

  I'm to the point of madness here.

  I want to just record from Chrome, etc... any audio system, the logic.

  Help, please

  Drew

  1 / set your output to the system on your Mac for soundflower.

  (so now if you play a youtube video or a song on iTunes you won't hear anything - as it is realized in SF).

  2. in line with defined preferences of-> audio-> entry to soundflower

  and something other than control panel the value out of logic (built in output is fine)

  3 / create an audio track and assign to its entrance at Gate 1

  4 / record select the track or you can monitor the track entrance. You should now hear any audio playing on your system (from youtube or iTunes etc) (in fact guarded of logic)

  Press R to save it.

• I am facing problem with playback of the audio recorded.

  Original title: sound recording problem

  Use built in mic, I recorded w/vocals/guitar,... and playback starts well, but after a few seconds the sound loses the basis... or low frequencies.

  It is uniform everytime I try. What I am doing wrong?

  Rich

  [Moved from comments]

  Hello

  What version of the Windows operating system is installed on your computer?

  If I understand correctly you are facing some problem with the audio recorded. There is no way to lose the sound after a few seconds; There seems to be a problem with the registration. I suggest you to run the game audio recording Fixit then try to register once more and check if it works.

  Automatically diagnose and fix problems of Windows audio recording:

  http://support.Microsoft.com/mats/AudioRecording/

  For more information, see the following link:

  http://Windows.Microsoft.com/en-us/Windows7/record-audio-with-sound-recorder

  Hope the information is useful.

• Why do I have a loud hum when with audio recorded when I read a file saved with Microsoft LifeCam with the latest version of Microsoft Essentials?

  Why do I have a loud hum as well as audio recorded when I play a file saved using Microsoft LifeCam with the latest version of Microsoft Essentials?

  HUMS are usually ground fault loops.

  If it is a test of laptop with and without the power connected (using battery instead)

  The mic can also have a cut wire, etc.

• Access to / computers sound card audio recording

  I can't find any support for access to and the audio recording of his computrers card.  I want to save her with an AVI file, for example, while documentary about a process.  I have a complete program for the video portion and wish I could increase my program with audio.

  First of all, is it possible with Labview standard (8.5) and Imaq Toolbox, and if yes, can anyone point to where it can be written to help understand how?

  Look in the 'Graphics & Sound' Sound palette' - you should find screws for obtaining sound sound card and also the screw to write to a .wav file.

  Then you'll want over them something like this (just for illustration, not tested - I was not even wire a stop button):

  

  Good luck

  Simon

• I tried to record some live audio. I downloaded Wondershare Streaming Audio Recorder I opened the program - but could not hear the audio I tried to play.

  original title: sound problems

  Hello!

  I tried to record some live audio. I downloaded

  Wondershare Streaming Audio Recorder

  I opened the program - but could not hear the audio that I tried to play. I don't know if downloading this program is related to the problem.
  I opened Skype - and everything worked fine. I could hear, etc. But if I run an MP3 in Windows Media Player - I hear nothing!
  My sound is at the top.
  In my Volume mixer, I see:
  1 output device digital (SPDIF) bounce up and down. (but I don't)
  2 but applications: sounds of Windows, Windows Media Player and Google Chrome will not move. (but they are at the top).
  Any suggestions?
  Jews

  I managed to get the results of work. I don't know where come the SPDIF.

  I downloaded a new driver Realtek for audio from the computer. This corrects the problem.
  But I still want to know what happened.

• XP Audio recorder

  Abgesehen von dem Audio Recorder bin ich mit danke, aber ich recorder would so like den alten XP Vista. Kann ich den herkriegen und auf installieren Vista irgenwo?

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  Thank you.

  Mick Murphy - Microsoft partner

• Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

  Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

  Hello

  Try resetting the default associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  If necessary:

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  ====================================

  Also follow these steps:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------

  Then, if necessary:

  Have you recently installed another player?

  Reset your associations for WMP and IE.

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  ---------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html

  I hope this helps.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.