Incorrect in catalog after new SSD drive letter

Similar Questions

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• Windows Update does not work after new hard drive

  After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

  What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

  Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

  Disable automatic updates in Control Panel > automatc updates > disable automatic updates

  Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

  Then manually download and install the current cumulative security for IE8 update and restart the computer.

  visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

  It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

• A new SSD drive recovery

  I just bought a new EliteBook 8770w and an SSD and I wanted to replace the primary HARD drive, so I created a with the tool HP recovery disk.

  But when I swap the drives and put only the new SSD and press F11 when starting, no recovery Manager starts.

  If I try to boot from the first CD of backup, Windows 7 installation starts. Any idea what's going on here?

  1. can I attach two disks and run Recovery Manager from the original windows and restore it on the second (SSD)?

  2 - is the best way to change the primary HARD disk?

  Hello

  a few days before I bought laptop hpG6 with mechanical disc, and I bought an ssd

  I photographed the entire disk (4 sheets) by acronis true image before doing something.

  then I photographed on SSD, and everything is OK.

  true image can deal with the other disk sizes.but Ghost not.

• photo restoration icloud for mac after new hard drive

  I had to have a new hard drive for the Mac.  How can I get back my photos on my Mac to iCloud please.  Hope its possible and easy.

  Thank you all

  Photos > Preferences > iCloud > iCloud photo library > on

• Application still works after changing the drive letter?

  XP is installed on drive C and all applications are installed on drive D, if I change the letter of the drive from D to E, would still be able to recognize this change on all the programs installed in XP? or will it be impossible to locate the drive for application?

  Thanks in advance for your suggestions

  Hi oem7110,

  Unfortunately, the installed programs do not work if the drive letter is changed to the disk were the programs are installed.

• Cannot access external hard drive after changing the drive letter in vista

  The drive letter for my external hard drive has changed itself, I have tried to change the letter back to what it was, but still cannot access the drive.  Diving is in my computer, but when I try to open it it tell me I need to format.

  Hello

  I suggest you to contact the manufacturer of external hard drive for better assistance.

• Unable to connect to Wifi after new Hard Drive installation

  Hello, I really need help. I have searched this forum days, reinstalled my drivers in the correct order, but I'm still not able to connect to Wifi.

  I have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything works fine EXCEPT the WIFI. In the network controller device manager has a yellow triangle with an exclamation mark inside. I tried to search to find the driver but it says that it is impossible to locate. When I download the Intel driver on the Dell site, it downloads but nothing never opens. I'm at a lost and I just need help. All the answers or pointing in the right direction if this has already been resolved would be greatly appreciated.

  OS: Windows Vista 32 bit

  MizzGi,

  Download and install in this order...

  Dell System Software, v.6.5.0, A05

  Intel GM45 Express Chipset Family, v.8.7.0.1007, A00

  Card reader Realtek RTS5158E, v.6.0.6000.20125, A04

  
   

   

   

  Then, go to the Dell warranty status , enter your service tag, click the original configuration. Look and see what wireless adapter that you have installed. Then, go to the drivers & downloads , enter your service tag, select your operating system and under network, download and install the drivers for your card.

   

   

  Then, download and install Dell QuickSet, v.9.6.21, A07

   

   

  Places to look to see if your connection is activated

   

   

  What is going on?

   

   

   

   

  Rick

• Install after new hard drive

  Hello

  My laptop was very slow, so they installed a new hard drive. I have an adobe account and purchased a plan for a year in September. due to the replacement of the hard disk, I lost all my data from the computer. How can I reinstall Adobe Creative Cloud without paying again?

  Thank you

  I hope that you signed your account cloud to release your activation!

  Cloud license allows 2 activations to time http://www.adobe.com/legal/licenses-terms.html

  -pdf of 200 http://www.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-20150601_2.

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

• Audio SR.___No after new hard drive and reboot with windows vista pro form xp in hp slimline s7727c.

  have a hp pavilion slimline s7727c. hard Dr failed. Puy in identical new WD3200aajs old. reinstalled xp pro OS instead of vista home. everything works well after update driver nvidia to the system. a realtek HD AC97 audio when new. with controller audio generic SDO installed. have tried all drivers realtek has unsuccessfully, have now no audio and the system recognizes only not the controller is installed on the card. is there a solution? as a now-defunct windows driver or file which has been in the vista system that caused his work? looking for a solution. No PCI spare parts, only a slit, which contains card Tel/fax. Thanks for the help. Bill Huff Sr

  Hi billhuffsr,

  Run the patch from the link below: diagnose and automatically repair audio playback problems:http://support.microsoft.com/gp/no_sound

  Also, try the steps from the link below: how to fix sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The value of creating a section of boot on a new SSD drive, an HP recovery disc?

  I got a Kingston SSD 120 GB for Cristmas. Happy me! I have problems because the instalation of all recovery discs fails by copying the files from the recovery partition. Then starts the copy function, but stop at 12% and then nothing happens. If I try to reboot the computer tells me the man is no boot disk. Is there anyone who has had the same experience? What can I do? I just bought a full set of HP recovery disks.

  Unfortunately, he says does not work. I got a message that there was an orror with the disc, and a recovery was not possible. I reduced the size of the recovery so that my new drive was big enough, but it won't work.

  I bought a HP recovery media something like $ 50, espesialy designed for my installation. He din will not work either.

  I downloaded Windows 7 Home premium software of windows, installed forum Web site a TI went well spent, except my password that I have only an OEM license. Software OEM can only be downloaded, isen can't this sad!

  Now I suppose that I wil have to buy a new win 7, with lots of media, to get because I guess I give up with HP and missing support. I will newer buy a HP computer again it comes in terms of dealing with HP, even computers normally work well. I think that I bought about 5 HP PC so far.

  At least, I hope I get a refund on the useless software that I have purchased from HP.

• Move catalog to new external drive

  I'm trying to move a large catalog (including photos) on a larger external drive.  I have "supported" to drive a third.  And then "restored" to my new drive.  But when I gp at file > catalog and that it points to the folder where I placed the restored catalog, the button OPEN is not enabled.  I can't get PSE8 to open the new catalog.  Help, please

  Thank you

  The "restored" catalog appears in the folder when you go to file-> catalog and select the folder containing the catalog 'restored '?

  What happens if you click once on the name of the catalog? The Open button becomes selectable then?

• LR break during importation and development after installing SSD drive followed by 10 Windows

  I recently had my hard drive replaced w / a SSD and also had installed Windows 10. I was already running Windows 7 Home Edition. Had problems installing the creative cloud app manager, followed by matters more LR and PS installation. LR would launch, but eventually crashing. Contacted Adobe support and must go and fix some file due to error that I was getting (does not solve it) and do not remember the name of the file now. It was like last week some time. Uninstalled and reinstalled LR, always crashing while importing and developing.

  I have clients waiting for images and can't seem to get this resolved w / 'Customer Service '.

  So I'm tender hand to my classmates. Help please =.

  Signed,

  Is bored and wants to edit photos

  AKA Heather

  www.hjsullivan.com

  • Please close Lightroom and then open Device Manager, and then clear the graphics card.
  • Open Lightroom and uncheck the graphics processor.
  • Lightroom nearby, and then select the graphics card from the Device Manager.
  • Now please open Lightroom and you should be able to import.

• Difficulty of startup disk after copying the OS to new SSD

  This morning and used EaseUS partition wizard to copy the recovery partition, OS partition (C :) and unnamed in the SSD partition, I received a shiny new SSD. I should have used one of the many software migration available but I didn't, so I've been running a few problems. I have everything but the d: more expanded and copied in the new SSD drive C (on the SSD) to occupy all of the space allocated.

  From there, I set my BIOS to boot from the disc SSD and Windows loaded normally, so I assumed that the new drive was working how I wanted and erased everything except the D drive on the old drive. After the reboot, I have met with a cursor flashing instead of the windows logo 7.

  After some research, I think my problem might by one of the following:

  The operating system on the new drive partition was not set up active, is not loading at startup.

  The system partition does not recognize the new, larger OS partition and must be reset to match the new partitions.

  The OS copied on the new SSD is simply not bootable.

  I used my laptop (Ubuntu) to check the SSD drive, and all the OS files are there, exactly how I expected to be after you copy the files using EaseUS.

  I have the Windows 7 installation disc, as well as the old HDD and the new SSD. I can do to fix the OS on the SSD so that I don't have to do a new clean install, or who is my best option?

  Thank you, Ty

  Hi TySimmel,

  Thanks for posting the query on Microsoft Community.

  I appreciate your efforts and your time.

  I suggest you try the steps in the link below to check and the system recovery options, if it helps.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Please get back to us with the information required to help you further.

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.