Install after new hard drive

Similar Questions

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• After installing a new HARD drive, I get a screen "control i to access the configuration utility.

  Help?

  I installed a new HARD drive on my xps 15 because the old drive crashed. Everything works fine and the system boots perfectly. Before entering the Dell splash screen, the screen "control i to access the configuration utility" appears for 5 seconds. After that, the normal boot sequence resumes. Can someone please explain to me why this is happening and what I can do about it?

  Here is a link to the screen I get started: http://s102.photobucket.com/user/alexcinie/media/photo_zpsb75f0a7f.jpg.html

  The mSATA drive is used as a cache for the hard drive dynamic - these are essentially implemented in a RAID 0 array.  See the link below (it is for Alienware, but applies to your system as well).

  If you want to keep the disk cache, you need to configure the array as shown.

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/kcsarticles/ArticleView?docid=564442

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

• drives no raid after installing a new hard drive, deleted a raid volume.

  I recently installed a new hard drive on a dimension 9200. One of the two hard drives in the pc has been a failure. After installing a new drive, I had a working old drive and a new drive, I installed vista on the new drive and found I couldn't see the old drive in the computer, also the raid volume was always the same that before removing one of the old disks. After you delete the raid volume, I have now two non-raid drives. My pc would be better if I change those two to a Raid volume as were the two previous albums, and if yes, how can I do.

  
  

• I need to re - download lightroom and photoshop after installing a new hard drive.  Can someone tell me how to do what you please?

  I pay every month for the use of Lightroom and Photoshop.  I recently installed a new hard drive on my laptop, so I have to re - download and re - install LR and Psalm someone can help me with this please?

  Hello

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

• I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

  I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows Update does not work after new hard drive

  After you install the new hard drive, when I click on windows update, it opens, makes his scan, then I get the message, (the website has encountered a problem and cannot display the page) I have a Dell Optiplex 745 running XP Pro, Explorer 8, have tried several times and restarted, please help.

  What do you think of will be without safety last cumulative update for IE8 be manually downloaded and installed before going to windows update to nothing at all.  What will happen is the CPU at 100% and a whole lot of nothing else of fortification.

  Do not go in line with the hopes of getting the updates of windows after the installation of SP3.

  Disable automatic updates in Control Panel > automatc updates > disable automatic updates

  Start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  Get the exe to install offline full download for IE8 [should represent approximately a 16 MB file] and then install IE8 after SP3 and the decline of the ability to download updates for IE8 at installation time.

  Then manually download and install the current cumulative security for IE8 update and restart the computer.

  visit Windows Update through your browser link in the start menu.  Consent to any ActiveX install queries and validation / advantage genuine offer and cross your fingers.

  It is possible that you may still have questions, but this will reduce some of the problems if you follow the recommended sequence.

• Install a new hard drive

  My Presario CQ5700F 500 GB hard disk is dead. If I install a new hard drive, but I can't find my recovery disc and HP has no more recovery for this PC model Kits. How can I put Windows 7 Home Premium 64-bit of the system back on my computer? Help me please.

  Download the version of Windows 7 which shows on the COA sticker and use the key code too...

  Make sure that the COA key code is readable before you download the ISO, because without it, the ISO has no value. You should also keep a note of the key code in a safe place.

  Windows 7 Home Premium SP1 - U ISO

  English x 64: X 17 - 58997.iso

  You will need to convert the download on a bootable DVD...

  http://www.isoimageburner.com/

  Note that you will have the task to install all updates from Windows Update Windows. Do NOT check, download and install the drivers on Windows Update.

  You will also have the task of getting the device drivers which should ONLY be obtained on the website of computer manufacturer, UNLESS the manufacturer of the computer directs you to Windows Update. Start with the CHIPSET drivers and work from that point, video, audio etc...

  Also, do not use the Web DRIVER FINDER sites. Always use the computer manufacturer OFFICIAL site...

  After you complete the above tasks, install Microsoft Security Essentials and then finish with your favorite programs.

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Install the new hard drive - how to proceed?

  My hard drive has bad sectors which (according to Spinrite) is not repairable.  I also ran all the HP utilities who tell me that the hard drive needs to be replaced.  So, I bought a new one that is the same size and the brand as what exists currently in my laptop.

  Laptop is HDX16 that came with Vista.  I upgraded to Win7 before realizing that my Imaging backups were a failure due to bad sectors.  The last good picture I have with Shadow Protect is the system with Vista and is now 3 weeks old.  Meanwhile, I use Norton Security backup feature to back up all my files on a daily basis.   I noticed yesterday that Win7 has a built-in backup feature imagery so decided to see if she would complete successfully and he did.  So now, I have a picture of the Win7 installation as well.

  I did system recovery disks for my laptop.  If I read information of HP correctly, when I run the restore, it will automatically create the partitions C & D on the new drive, install the recovery disk D environment and continues to run since that installation of Vista hard disk?  If so, once the operating system is running on the hard drive again, I think I can then move to Win7 yet and then use the recovery feature to copy the image, I made yesterday to the laptop.  Is this correct?  Am I missing something?

  Otherwise, my other option would be to run the recovery discs, then use the Shadow protect recovery disks to copy the old image of 3 weeks, then switch to Win7 again and somehow find all the files I have created/changed over the last 3 weeks I want to keep and they copy to the laptop?

  Any suggestions appreciated because this is the first time I installed a new hard drive.

  Thank you.

  JO Anne

  Hello

  It may be faster to simply restore the image of Windows 7 that you have created the new hard - to do this, you'll need to the Image and a Windows 7 repair CD (you should have been prompted to do this after you have created the Image of the system).  The link below is a guide detailing how to restore an Image of Windows 7 on a new hard drive.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

  Kind regards

  DP - K

• Qosmio F30 - installing the new hard drive

  Hello

  I just installed a new hard drive on my Qosmio F30 - he came originally only with a 60 GB hard drive.

  The second disc is identical to the first in every way, i.e. of 60 GB drive Toshiba.

  I initialized the new drive and it also shows online and unallocated. I want to use the reader to basically increase my quality, not like a mirror and so chose this option using the RAID Utility.

  However when I expelore the C drive, it shows than the total capacity of the drives as 60 GB. I guess that both drives should be showing as a player, like 120 GB.

  The drive works properly?

  Thank you

  Hello

  You can check in the BIOS if the second HDD is recognized correctly

  As you say you don t want to use a mirror mode, but then you must set the RAID0 stripping!

  Please also check the settings of the BIOS RAID!

  At page 242 user manual you will find all the details on the different options and what they are for

  Greetings