Incredible trouble with two A10 S203 network!

Similar Questions

• Broken screen, external display mode standby with Satellite A10 S203

  Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?

  Hello

  I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.

• TROUBLE WITH DRIVER-AMD Turion64-network adopter-wan miniport - SAYS DEVICE NOT WORKING and when updating (CODE31) comes__

  version of the file is 6.0.6002.18005(h_sp2rtm.090410-1830)
  Manufacturer: Microsoft Corporation
  Destination-c:system32/drivers/russstp.sys
  Plese solve the problem.

  Hello

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Trying to replace a XP computer with another XP computer in a peer-to-peer network with two other computers.

  Replace a XP computer with another XP computer in a peer-to-peer network with two other computers. became terribly frustrating. I spent a day and a half by train to get there. I know MS wants everyone to buy their new OS, but I can't afford it right now. In the meantime, I'm trying to add a computer to my existing peer-to-peer network. I have never had so much trouble. I can not get computers to eachother Duke on the network.

  Over the past 3 years I have implemented each of the existing computers. I'm familiar with the silly quirks of this operating system (i.e. a few hours waiting see if eventually the computers will warm up to each other and decide to play nice together). All computers are able to connect to the internet through the same router connection, and I was able to get each of the computers to see one another, but not all, but none of the computers is to see the new computer. (The new computer is connected to ONE of the other computers, but stopped doing and do again it). Is there a simple step by step to do this? I don't care even if I can't not all computers on the network as a whole, I would like to just the computer I replace to see the computer I replace by in order to obtain the transferred files and get back to work.

  I appreciate sincerely ANY help ANYONE can offer.

  Hi okcbz,

  1. How many computers on the network?

  I suggest you have a look at the following links in the article:

  Introduction to Windows Peer-to-Peer network

  How to set up a small network with Windows XP Home Edition (PART 1)

  Windows XP Help & how-to
  

• What is the right way to extend a network with two stations 80211ac wireless fixed extreme apple via ethernet?

  I my house wired with ethernet and have logged as many devices via cat5e as possible. My problem is when I try to connect together the two apple airport extreme base stations and use the second to extend my network I lose the internet connection.  I am able to extend without problems via radio, but since I plugged in the House tried to take advantage of the fastest method by cable.

  Here's my network setup in a nut shell.

  In the basement, I have my router from Verizon Fios (gateway 80211n) currently configured to provide all the space an Ip address via dhcp (disabled wireless)

  Gigabit ethernet port 8 wired via gigabit switch through the cable between the bridge Fios and port 1 of the switch.

  two iMacs wired directly the fios gateway ports 2 and 3

  Base station extreme elementary apple (call it down at the moment) connected to the Fios bridge

  Extreme basestation secondary apple related to extreme primary apple base station

  Cable to switch TV

  Nintendo Wii connected to the switch U

  Apple TV connected to the switch

  Drive Blu - ray connected to the switch

  My mainly the Airport extreme is configured as follows

  connect via DHCP

  Address of the router is set to the Fios router

  FOR DNS, I used back free servers like Google, and level 3

  Wireless is set to create a wireless network

  Security is set to WPA2 Personal

  Turned on 5 GHz and 2.4 and 5 ghz are set to automatic

  Router mode is set to bridge mode off

  Second or first floor Airport extreme config

  Connect using dhcp

  Address of the router is also the Fios router

  Servers DNS is empty

  Wireless settings

  Network is set to extend a wireless network

  the wireless network name reflects my network

  wpa2 personal wireless security game

  Network

  Router mode is grayed out and pondered or bridge mode

  Second or first floor Airport extreme config...

  .. . Network is set to extend a wireless network

  Given that all routers are interconnected by Ethernet, you don't want to configure AirPort Extreme to "Extend a wireless network." This option should be used only if the connection between the wireless base stations. Instead, the two base stations must be configured to "create a wireless network.  This is because that, with them all connected by Ethernet, you have the basis for a network of mobile type.

  With this type of network, each router will broadcast their own Wi - Fi network, but because they will all use the same network name (SSID) and use the same type of wireless security and the password, all the wireless clients will see them as network «one»

• Configure two Ports on an ASA5510 with 2 different inside networks

  How can I configure two ports on an ASA5510 (version 8.4 (5)) or with 2 different inside networks out interface or two inside and two on the inside outside routing to an outside and inside another for the rest outdoors?

  Specifically, I had all three interfaces with dhcp and basic configuration of all, I got one (10.1.0.0) inside out successfully from the internet (208.83.73.193 for example), but I'm not sure of the second internal interface (192.168.1.0) out to the internet.

  I need VPN or any connection between the two internal networks.

  This is the basic configuration of may:

  interface Ethernet0/0

  nameif Internet

  security-level 0

  IP 208.83.73.x 255.255.255.240

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 10.1.1.1 255.255.0.0

  interface Ethernet0/2

  Guest Network Interface Description

  nameif GuestNetwork

  security-level 100

  IP 192.168.1.1 255.255.255.0

  Route Internet 0.0.0.0 0.0.0.0 208.83.73.206 1

  Route Internet 192.168.1.0 255.255.255.0 208.83.73.206 1

  dhcpd address internal 10.1.5.100 - 10.1.5.254

  dhcpd dns 10.1.2.7 10.2.1.200 internal interface

  dhcpd wins 10.1.2.7 interface internal

  interface of lease 432000 dhcpd internal

  field of dhcpd

  xxx.xxxxx.xxxx.gov

  internal interface

  enable dhcpd internal

  dhcpd address 192.168.1.2 - 192.168.1.50 GuestNetwork

  dhcpd dns 208.67.222.222 208.67.220.220 interface GuestNetwork

  enable GuestNetwork dhcpd

  network object obj - 10.1.0.0

  dynamic NAT interface (internal, Internet)

  I tried to configure nat for the guest network the same way that I have it set to the 10.1.0.0 network and also nat static and that it did not work (maybe I did wrong).

  If get this accomplished is possible I would very much apreciate a configuration example of what do I do

  Help, please

  I also found this two articles from Cisco that applies to the ASA Version 8.3 and I guess she could apply to Version 8.4 (5), please let me know if yes:

  http://www.Cisco.com/en/us/products/ps6120/product s_configuration_example09186a0080b7c939.shtml

  http://www.Cisco.com/en/us/products/ps6120/product s_configuration_example09186a0080b1ee95.shtml

  Thank you

  two inside networks to one outside is no different to a demilitarized zone and inside outwards. Both come from a security level higher and go to a lower level of security. In your case, there is the second inside network for guest users, I would use a lower level of security as the guest network is probably not as trustworthy as the internal network.

  The second requirement (two inside and two outside) would need a form of routing that the ASA does not support the way in which you want to use based on policy (there are some hacks with NAT, but it's really horrible). That you could use for this are security contexts. A context with inside1/outside1, the other context with inside2/outside2. Here, you can easily route traffic inside2 to outside2 and inside1 to outside1.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.

  I just changed my internet provider and can connect with two of our cell phones, but the third said no identified network/no access to the internet.  I tried all of the obvious solutions.  Windows 7

  Original title: unidentified network

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with the unidentified network error message.

  Perform the steps from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

  Answer to us if you are having problems with the unidentified network or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.

• URGENT! Two physical network with two subnets completely - no bridges - interface cannot connect both

  This is my urgent problem:

  I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.

  How can I just say a net card to go on this submarine and the other on the public void?  Go crazy. Help, please.

  Thank you

  P.

  Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.

  For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor

• Best practices for network configuration of vSphere with two subnets?

  Well, then I'll set up 3 ESXi hosts connected to storage shared with two different subnets. I configured the iSCSI initiator and the iSCSI with his own default gateway - 192.168.1.1 - targets through a Cisco router and did the same with the hosts configured with its own default gateway - 192.168.2.2. I don't know if I should have a router in the middle to route traffic between two subnets since I use iSCSI ports linking and grouping of NETWORK cards. If I shouldn't use a physical router, how do I route the traffic between different subnets and use iSCSI ports binding at the same time. What are the best practices for the implementation of a network with two subnets vSphere (ESX host network: iSCSI network)? Thank you in advance.

  Install the most common iSCSI would be traffic between hosts and

  the storage is not being routed, because a router it could reduce performance.

  If you have VLAN 10(192.168.1.0/24) iSCSI, VLAN 20 (192.168.2.0/24) ESX

  MGMT and VLAN 30 (192.168.3.0/24) comments VMs and VLAN 40 (192.168.4.0/24)

  vMotion a deployment scenario might be something like:

  NIC1 - vSwitch 0 - active VMK (192.168.1.10) MGMT, vMotion VMK (192.168.4.10)

  standby

  NIC2 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC3 - vSwitch 2 - active VMK1 (192.168.1.10) iSCSI

  NIC4 - vSwitch 2 - active VMK2 (192.168.1.11) iSCSI

  NIC5 - vSwitch 1 - current (VLAN30) guest virtual machine port group

  NIC6 - vSwitch 0 - MGMT VMK (192.168.2.10) standby, vMotion

  VMK (192.168.4.10) active

  You would place you on VLAN 10 storage with an IP address of something like target

  192.168.1.8 and iSCSI traffic would remain on this VLAN. The default value

  gateway configured in ESXi would be the router the VLAN 20 with an ip address of

  something like 192.168.2.1. I hope that scenario help set some options.

  Tuesday, June 24, 2014 19:16, vctl [email protected]>

• 5.1 ESXi management no connectivity network with two network adapters connected

  IBM H chassis equipped with blades HS22

  Blades use Broadcom 5709 s dual gigabit NIC

  ESXi 5.0, system worked very well with both NICs connected (static IP) in network management parameters (able to ping in and out). Completed the upgrade to ESXi 5.1 preserving VMFS datastore. After the reboot, management network shows two NICs connected to static IP always assigned but I have not any (impossible in our out ping) network connectivity. If I disable one of the network cards and restart the management network, I can immediately ping inside and out.

  I took a spare blade and tested by passage of 5.0 to 5.1 and 5.1 installation clean, the two producers same results. A host with two active network cards 5.0 (if static IP or DHCP) can ping inside and out. A host with two active network cards 5.1 (if static IP or DHCP) can not ping in our out. 5.1 host cannot obtain DHCP address, but fails to APIPA.

  I found the problem. For some reason, both switches must be actively connected on the same network for observed networks provide correct information for the collection.

• Help please with two extremes and DNS

  Hello

  I hope someone can help.

  My setup

  Modem-router ADSL with WiFi turned off >

  Airport extreme connected by ethernet to the Modem/Router - create a wireless network, a static IP - Bridge Mode - >

  Airport extreme connected by ethernet to the Airport extreme - create a wireless - Mode Bridge >-static IP address

  Both now have the status message - "no DNS - this Airport base station does´t server have a DNS server address and could have problems connecting to the Internet."  If the airport is in Bridge Mode is necessary enter the DNS server (no shows at what time the DHCP value)? I should give him the address of the modem/router or real DNS I see in my modem/router settings?

  Also the WiFi mode extend a wireless network is only fair for multiple extremes that extend wireless (No ethernet cable)?

  Thank you

  Turning off the modem/router

  Power off each AirPort Extreme

  Wait a minute

  Turn on the modem/router and let it run for a minute

  Put on single AirPort Extreme and check its status

  If the first AirPort Extreme looks good, the second turns on and check its status

  Report on the results

  If you're still having problems...

  The two extremes of the airport are working properly in the past... and this problem appeared just... or... is that what you are having trouble with a new configuration?

  When you say that every AirPort Extreme has a static IP address, this means that each AirPort Extreme has been configured to request a specific IP address... or... does that mean that you have configured your modem/router to provide a specific IP address for each AirPort Extreme?

  If you check the settings for each AirPort Extreme... each of them receives the static IP address that the router/modem is the assignment?

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• problems with Windows 7 mapping network drive

  I bought a new computer to work today. It's a HP Pavilion Slimline s5220f. Works on Windows 7. All our other computers working under Windows XP. We have an external hard drive that acts as a file shared for the organization. (We are a small non-profit and rather rudimentary.)

  I have problems to connect to our "shared drive" - the reader 's' - where all our shared work files are kept. I have connected a hundred times on other computers, but can't seem to get it right with Windows 7... What I do usually it is right click on the 'my computer' icon and click «map drive network...» "Then I put in '\\filecabinet\shared' and he asks a log on and password... I checked the log on and password - everything is correct. When I enter the log and password, I get a message saying that "the specified network password is not correct".

  I spoke with two different people at HP. Nothing has worked. I really need access to these shared files in order to work. Help me!!

  After authentication on your Windows 7 computer, is there an indication of a field in the dialog box? (If not in a domain, your computer name is represented by a colon after it.) Well, if so, your computer tries to authenticate with domainname\username instead of only User_Name. It gave me trouble when authenticating to a SAMBA file server. Try plugging a "\User_Name". Your computer name should disappear when you type the backslash.
  Warning: this was tested on a Windows 7 machine company. This trick should also apply to Win 7 pro. I don't know about other editions if.

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004