InDesign cc 2015.4 - display settings

Similar Questions

• InDesign CC 2015 will not open

  Hi all, I'm having a problem with my copy of ID CC 2015. I use the application on a computer to Win7 64-bit. As far as I know, we have no major update of the system or the changes in the last days.

  When I try to launch ID, I get an error message that says "Adobe InDesign CC 2015 has stopped working" but essentially, the splashscreen is displayed and the application attempts to initialize, but never completely starts because of the error. S

  I had this problem with the previous version of yesterday, so I've updated the app via CC this morning. The same problem persists.

  Anyone has a suggestion for what I could try before I have to call Adobe support and lose 2 hours on the phone?

  Hi jgant,

  Exactly what I was expecting. We can solve this problem. It is related to MSVCR120. DLL file. There are two ways we can go about this:

  1 send me an email with your details to return call and I will get back to you to solve the problem.

  2 follow these steps in the exact order, and you can do it yourself:

  1 reset (rename or delete) files (en_US) InDesign preference files the and itinerant. Please see: InDesign and locations of support Preferences

  2 download the repair MSVCR files from this link: Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

  3. download the first two files EXE (x 86 & x 64)

  4. run both of them one by one, choose the repair option.

  5 restart the computer after completing the execution of these two

  6. start InDesign and you should be good to go.

  Kind regards

  OM

• Upgrade to Indesign CC 2015.5 - does not open and hangs on the splash screen

  I upgraded to CC 2015.5 2015.  After you have installed indesign, it allowed me to open the program once.  After closing the program, any attempt to reopen causes an error pop up during the splash screen that says "Adobe InDesign CC 2015 has stopped working" and leaves the program.  I uninstalled / reinstalled two times with the same results.  Other 2015,5 improvements seem to be fine, only the Indesign program is having issues.  Any advice would be much appreciated on how to fix or revert to the previous version that worked.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Vineet

  (InDesign engineering team)

• Why will not enabled fonts to Suitcase Fusion 6 not appear in InDesign CC 2015, but will be in InD 6.0?

  I have all the latest updates to Suitcase Fusion 6 and Indesign CC 2015. I have the fonts that they are 'ON' in the suitcase, but when I open the files in Indesign displays only a partial selection of a font family. EX: Frutiger STD (OT) family is all about, but 47 Light Condensed appears as lacking in IND. If I open the file in Indesign 6.0, everything works very well, so it would seem that the problem may be with CC or suitcase has a bug that they need to fix (announcement to Extensis too).

  I tried the suggestions of the other posts, but nothing works.

  What I tried:

  • Restored preferences in Indesign

  • One replaced Mode Menu fonts 'name of the font of all research.

  • Restarted, rebooted, updated,... typical of troubleshooting scenarios.

  
  Any other suggestions?

  Sit down to set up files to run the tests that you have suggested, I got a response from Extensis. She suggested to clean the cache of fonts in the file menu of the suitcase. I had not thought to do this (not realizing that it was an option in the suitcase, using a cache cleaner in the past).

  It's done. A couple of weird things that happened, but after the closure of the programs again and re-opened, it worked. Hope that fixes it. Again, appreciate your help and advice for troubleshooting. Keep those in mind if it happens again, or as an alternative to other oddities of fonts.

  Steven

• Satellite Pro L300: How to change the display settings

  Hi I have a toshiba satellite pro l300 run a pentium dual core and intel 965 display chip any games I play on my laptop, they open in a small box and not full screen I've had a quick glance at the settings to try to resolve this with no luck.

  Can someone tell me if there is a way to change the settings to get the games to play in full screen, my current display settings are 1280 x 800 pixels and running at 32-bit color.

  Any help would be appreciated.

  You should set this option to full screen in the games you play. Checked for these options, because you are given something like graphics, solution details and in most cases should be windowed.

  One thing you might try is to uninstall your current display drivers, and then reinstall new ones. Make sure that you use tools like ccleaner cleaning record or similar.
  Check if you have installed all the latest updates of windows and directx version, if you are using Windows XP.

• Tecra M2 - display settings

  Hello!

  I have a Tecra M2 laptop and I want to change my display settings, in order to increase my screen resolution to 1024 x 768 for a higher resolution.

  I have not found all the drivers to change...

  Can you help me?

  Thank you.

  Hi Ricardo

  You can find the driver to display on the Toshiba site.
  Go to: http://eu.computers.toshiba-europe.com then support & download--> download drivers

  Best wishes

• Satellite A200: nVidia 7300 Go does not save the display settings

  I'm using the latest drivers available, but I can not even save display settings in nvidia
  Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
  These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
  their default values.

  I can't use a monitor external because the default brightness settings
  are very painful! They are literally blinding! Color settings do not record of either.

  Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

  I also get bad interference on the screen lines when using an external monitor. It's very bad.

  Hello

  Have you noticed that emits from the first day with the factory settings?

• is lightroom cc supports my on my macbook pro mid 2015 retina display?

  is lightroom cc supports my on my macbook pro mid 2015 retina display?

  Welcome to Apple Support communities

  Here you have the requirements of Lightroom CC-> https://helpx.adobe.com/lightroom/system-requirements.html as you can see, it works with OS X El Capitan, so you should not have any problem using it in your MacBook.

  If you are worried about Retina display support, it is supported, worry is not on this topic.

• Does anyone can help with the display settings on Satellite 4070?

  My brother gave me his old laptop, a Satellite 4070, I wrongly thought was of Wi - Fi enabled and it is connected to my library with poor results.
  The display settings are gone and continue to go haywire and display a message saying:
  There is a problem with your display settings, the adapter type is incorrect, or the current configuration does not work with your hardware.

  I tried to change the display settings but they go back - anyone got any ideas on that?
  I know there is a product recovery CD, but naturally enough I don't have that either.
  Thank you

  Hello

  I m not exactly on this fault, but it seems there must be something wrong with the graphics driver and display settings.
  That's why I recommend you first remove the old driver and after restarting again try to install the graphics driver from the Toshiba driver page.

  I think you are using the Win98. Am I wrong?
  Then visit Toshiba, download the Trident display driver and install it!

  Good luck and have a nice day ;)

• Satellite L40 - 14F - display settings problem

  Hello

  I have Toshiba Satellite L40 - 14F with Intel GMA X 3100 video card.
  I have problem of display settings, I can't change the screen resolution and color quality when installing the drivers for video card, screen resolution is 800 by 600 pixels and color quality is the lowest 4 bit, when I uninstall video card drivers can change it. I try to install other drivers, there is the same problem :( Please help me :)
  Concerning

  I've updated the BIOS then install video card drivers and it works :)

• HP Pavilion Notebook PC g6: display settings & customize

  Hello

  Need help-

  I've recently upgraded to 10 64 bit windows and now when I righ click on desktop and click on personalize, display settings it comes up with - see attached photo >

  

  Any help would be appreciated.

  Thanks in advance.

  Hello @jm88,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue of the display and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number

  In the meantime, try to perform the Microsoft push Resetline and let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Display settings S920 missing page, need help

  Hello

  I have a strange problem with my phone S920 and need help.

  First I describe that I made:

  I bought two phone weeks and first install update "by air" (from the settings menu, "System Update"). The current version number is S920_ROW_S117_130815. After that, I set the settings on the phone, insert the SIM and SD card and started to install applications. When I found that photos from my SD card are not visible in the gallery. He won't get the images in the external SD card. I can see all the files on this map in the file browser and open, but the Gallery shows only a few files from SD internal tried to force to re-scan of the media files. Finally, Gallery shows all the photos, but I found some files on my SD card had size = 0 bytes. SD card was probably not properly disassembled during a new analysis. I've wiped the SD card in settings of the phone and coppied all data to the SD card in my PC. And re-scan again. Now all the files was correct and all images is vissible in the gallery. But a few days later, I found that I can't run page display settings. I tried to access to this-> all the settings, fron-> display settings but received a message "Unfortunately stopped Control Panel:

  OK, I noticed that my problem disappeared after I disabled my live wallpaper. Let me tinker some more...

• my display settings keep returning on 2 screens at startup to the top

  I have attached a second monitor to my Sony laptop.  The 2d display monitor used to iterate through a docking station Kensington DisplayLink.  For some reason, the docking station picks up is no longer display for the #2--si monitor I recently started to connect the monitor directly #2 on my laptop.  Now every time I disconnect the monitor #2 to try to use the laptop with the Moose #1 display attached - after startup, it comes in white.  I discovered the Dungeon of display settings back to the #2 monitor, as the main display with the office displays only on the monitor #2 - it's why my laptop screen is blank - unless I'm reconnect the 2d display whenever I start.  But it is not practical and the net effect is that until this has been resolved I can't use my laptop away from my office.  I keep resettingt the display settings in the control panel to a single monitor, but it keeps going back to 2.  What is the solution?

  Hi, Msnsurf101,

  Check your settings in the Bios

  Procedures vary depending on the manufacturer of the BIOS. Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. For more information, see the documentation provided with your computer or go to the website of the manufacturer of the computer.

  

  Warning

  Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  How to switch monitors primary & secondary

  http://www.ehow.com/how_5919616_switch-primary-secondary-monitors.html

  Uninstall of display adapters

  Start > right click on computer

  Select manage

  Click on continue for UAC window (Vista or 7)

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the adapter and select uninstall

  Restart the computer

  Windows will reinstall the adapters

  See the updated chipset manufacturer site

• "Display settings could not be saved" what selection spilled landscape or flipped portrait mode

  I get an error "Display settings could not be saved" (version German win7).

  When I try to choose between modes of inverted in display - screen screen resolution

  Also, ctr-alt-left performs a rotation 90 and not running yet.

  I need the screen to rotate 270, how could I do?

  Thanks in advance,

  Vytas

  Dv6, radeon hd 6770M, Sandy Bridge graphics hd

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your Windows 7 and display rotated 270 degrees. Here is a solution from a third party site. Turn on your computer and wait for the Windows platform to load.
  Right-click on the desktop with icons part less. On the shortcut menu that appears, click on "Properties". Another pop-up window containing various tabs will appear on your screen. Select the 'Settings' tab, and then locate the button marked "Advanced." Go to "Intel Graphics Media Accelerator Driver" and then proceed to "graphics properties." Select 'rotation' and choose 'enable rotation '. Click on 'apply' first and then click on 'OK '.
  This will bring you to the desktop. Hold down the ALT key (usually positioned to the right or to the left of the space bar and Ctrl key (found under the shift keys) and press the right arrow key.) This will flip your screen to the right by 90 degrees.
  Hold the Alt key, the CTRL key, then press the down arrow key to turn the display upside down from 180 degrees.
  Hold down ALT, CTRL key, and then press the left arrow key to move the screen to the left of 270 degrees.

  I hope this helps.

  Thank you.

• PC health check-up according to my monitor does not have the minimum required display settings and change the DPI by default survey

  Original title: DPIdefsault level

  I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level.  How do I do that?

  What version of Windows?  You can change the DPI on Windows XP but right click on your desktop, choose Properties, selecting the tab settings, clicking on advanced and change the dropdown to DPI.  Other versions of Windows have similar steps.