Index of Smart, stop list and always ignore

Similar Questions

• Oracle Text Index add to Stop List

  Hi all
  
  I have an Oracle (CTXCAT) Index of text on my Oracle 10 g Standard Edition.
  I also have a stop for the tokens in this index list.
  Now, I want to add a few empty words more to the stop list.
  Please guide me...
  
  
  Thanks and greetings
  Alexander gelin

  I think you can do optimization for your specific token token for the Index Rebuild, so no need to fast/full optimization.

  alter index myidx rebuild parameters ('OPTIMIZE TOKEN ORACLE');
  
  OR
  
  begin
    ctx_ddl.optimize_index('myidx','token', TOKEN=>'Oracle');
  end;
  

  If you are not attending the transactions on the base table, you can even synchronize the index rebuild.

  alter index myidx parameters ('SYNC 2M');
  
  OR
  
  begin
  ctx_ddl.sync_index('myindex', '2M');
  end;
  

• Microsoft Windows Search Indexer stopped working and was closed

  I get this pop-up error message "Microsoft Windows Search Indexer stopped working and was closed" and I can't get rid of it.  I tried to go to control panel, Indexing Options and Reindexing, but that does not solve the problem.  I always get this error message.  Any help would be appreciated.

  Thank you

  DooDoiDaddy

  My first try at a fix would be SFC, then re index again. The error control player would be next.

  1) right-click the icon of the drive in r explores(the application of the computer at startup)

  2) click on properties of
  
  3) click on the Tools tab

  (4) see error checking

  The System File Checker tool

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator.

  3. If you are prompted for an administrator password or a confirmation, type your password or click continue

  4. at the command prompt, type the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Mark L. Ferguson MS - MVP

• How to stop a vi running and always keep its vi reference valid

  Hi all

  I open a vi reference and need to dynamically execute and stop this vi. Problem is after I use the 'Abort Vi' method to stop it, his reference is no longer valid and I need to reopen the next time I want to run it.

  Is there a way to stop the vi running and always keep its vi reference valid?  While the next time I may use the method "RunVI" to run it and do not need to reopen it.

  Thank you.

  Anne

  Ben wrote:

  Citing the LabVIEW Champion Ed Dickens signature "using the button abandon to stop your VI is similar to the use of a tree to stop your car." It works, but there may be consequences. »

  Ben, I think he's talking about the VI Abort METHOD, not the button abandon.  I wrote a small example using run a VI, waiting, VI an abortion, then run a VI again, and it worked.  The reference did not become invalid.  You must make sure to wire a constant false entry Auto has the method to execute a VI.

  

• Error message: Message "Microsoft Windows Search index has stopped working and was closed" and TotalRecipeSearch Installer Plugin stub erros in Kaspersky.

  Original title: TotalRecipeSearch Installer stub Plugin

  Hello world

  I have problems with the startup of Microsoft Windows.  I get the Message below "Microsoft Windows Search Indexer stopped working and was closed"  a problem caused the application to stop functioning properly.  Windows will warn me if a solution is available.

  I also have a "TotalRecipeSearch Installer Plugin stub" and "My Web Search Bar for Internet Explorer, client e-mail and messanger clients". in my Kaspersky Anti Virus.  When I press fix it does not.

  Can someone help me?

  Thank you

  Irene

  Hello Irene,.

  Thanks for posting in the Microsoft Community.

  Since you are facing multiple problems, it would be useful if you can answer this question to help you further.

  1 Windows operating system you are using?

  2. have you done any recent software and hardware changes to the system?

  3. what Fixit try you?

  On the issue of Windows search, try the following steps:

  If you use Windows 7, and then try the troubleshooter, another run the Fixit of Windows search.

  Method 1:

  You try to run the search and indexing of convenience store and check if this solves the problem.

  Open the troubleshooter for search and indexing

  Windows search Fixit: difficulty Windows Desktop Search when it crashes or no results

  For more information, see the article:

  Improve Windows searches using the index: frequently asked questions

  Searching in Windows: frequently asked questions

  Method 2: Rebuild the search Index.

  a. open indexing and the Options to search by clicking the Start button, click Control Panel, click on Indexing Options.

  b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  About the issue with Kaspersky, try the following steps:

  You can try to uninstall and reinstall Kaspersky and check if it helps:

  Uninstall or change a program

  Install a program

  Note: Make sure you have the software of security or disk configuration files to install this later.

  If you need further assistance, please answer and we will be happy to help you.

• I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  I block junk emails every day, always bring, I mark the email phishing scam day after day, always find them in the same places day after day after day, is it possible to stop really and how?

  original title: tired of it

  You have posted in a forum for MSE, antivirus, antimalware application.  You must investigate e-mail options... providers (hotmail, gmail, yahoo, etc) screen several e-mail for spam.  You don't have not yet described here your email client... so there is little that anyone can tell you that generic advice.

• Microsoft windows search indexer stopped working and was closed - need help please

  I started getting this message

  Microsoft windows search indexing has stopped working and was closed
  today
  I deleted the files as described in other threads
  I tried to restore the index - which has not worked
  the sfc/scannow gets to 78% and then I get an error log - I can't open the newspaper - I do not have permission
  What should I do?
  my computer came pre-loaded with vista, so I did not install CD

  Hello

  Download and install Windows Search 4.0 and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14850

  Hope this information helps.

• MICROSOFT WINDOWS SEARCH INDEXING HAS STOPPED WORKING AND WAS CLOSED

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Links Internet and e-mail freezes, slow, screen turns off and stops.  When I get the system operational, I get the message MICROSOFT WINDOWS SEARCH INDEXER has STOPPED working AND WAS CLOSED.  Can not activate system restore to go back.

  Hello

  • What e-mail client is installed on your computer?
  • Is the system restore feature is disabled or there is no available system restore point?

  For Internet Explorer from freezing, you can optimize Internet Explorer and see if the problem still occurs.

  How to optimize Internet Explorer

  Because of Windows search indexer, it seems that there is a fix available, you can contact Microsoft Customer Service & provide article kb 952053, which contains the fix.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why that I get this message, Microsoft Windows Search Indexer stopped working and was closed

  Why that I get this message, Microsoft Windows Microsoft Windows Search indexing has stopped working and was closed [content] A problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  Original title: he ceases to annoy me

  A problem with the operating system.

  I would also like to run a file system check to verify and repair the operating system files

  Run a file system check to check and repair your system files.

  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833

• New type of font "Century Gothic" and works well with the 'live view', but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank y

  I downloaded my new "Century Gothic" font type and works well with live view, but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank you!

  I use and Filezilla to connect to our FTP site.

  I see on line 42 of style.css

  do-family: 'Courier New', Courier, monospace;

  I see on line 180

  do-family: "Helvetica Neue", Helvetica, Arial, sans-serif;

  and I see FontAwesome used in several places.

  I can only conclude that Courier New is the applied font.

  If you have a different version of style.css on your local system?

• STUCK - indexing a list and with the index as a variable

  Hello world. I imagine that this is not a difficult task, but I can't find any information on exactly what I need to accomplish.
  Let's say I have a table with fruits. The name of the fruitid and fruitname fields.
  I have query select * from fruit by fruitname. Then I take this data and create a list (or a table?) with the fruitnames.
  What I want to do is list the results with their place in the list or a table. Not their fruitid. For example:
  1 Apple
  2 Orange
  3 pears
  Where the 1,2,3 is the order of the list and not any recovered data form the query. I need to use the 1,2,3 as variables separately form the Apple, Orange, pear.
  I've been search in the online help, CFWACK and search for information about indexed lists is cheating on me. I was looking at listgetat but the results will be different each time and it just didn't seem like the solution ListGetAt returns the variable... for example:
  Apple Apple
  Orange Orange
  PEAR PEAR
  Any thoughts? Any help in a new direction is welcome. I use CF7.01 on WinServer2003 and SQLServer2008.
  

  Google "".  Find the cfml reference manual page and read it.  Pay special attention to the variables are produced by cfquery.

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• "Stop: c0000135" and "winsrv was not found" error

  Hello:

  I'm working on my aunt's computer and she recently started having an error message when it tries to start his computer: "Stop: c0000135" and "winsrv was not found" error.  I can't start in safe mode because it just goes back to the blue screen and gives the same error.  She can't find the cd of 'restoration' and I can't find a windows XP CD created to boot from.  In addition, as info, she has not installed anything new recently.

  However, I have access to a Windows 7 Cd, but as I understand it, this doesn't help me as much as a windows 7 CD won't work on an XP operating system.

  I'm not very high technology, I just generally help solve problems by searching the Web for answers.

  Can someone offer me some very specific steps to get his computer facing up and running, please?  Also, before doing anything that is suggested as I can and I have to back up his hard drive?  If so, how can I do that without possibility to connect to the computer?

  Thanks in advance

  Hello

  You can download a Windows XP recovery console (ISO) by http://www.mediafire.com/?ueyyzfymmig CD image

  Once you have downloaded the files burning the image on CD. You can do this with a program like Imgburn. ImgBurn can be downloaded at http://www.imgburn.com/index.php?act=download.

  Once you have written the CD you must restart the PC and start the PC with the CD. To do this, you will need to change the boot order in the BIOS to start first with the CD player. To access the BIOS, usually press you on F2, F10 or DEL. (when you put the top PC tell XX press the button to enter Setup/BIOS). Once in the BIOS search the menu for something in the sense of "Boot Priority" or "First Boot Device" or "Boot Order". Once you've found the setting change so that the CD drive is the first boot device. Save the settings and exit the BIOS.

  Now you can start the PC with the CD. If you get the message press any key to boot from CD - press a key.

  After the Conference on Disarmament has started, you will get a menu on the screen. Press 'r' to enter the Recovery Console.

  Follow the instructions on the screen. You will receive a list of the Windows Installations. Press '1' to connect to the Master Installation of Windows.

  You will be asked to enter the administrator password. Enter it or leave empty if there is no password and press ENTER.

  You should now be on the command line C:\Windows >

  Now type in

  CHKDSK c:/r

  Press ENTER. Allow chkdsk repair disk errors, it can find.

  Once done type in

  CD system32

  Press ENTER. Now type in

  dllcache\winsrv.dll copy

  Press ENTER. You should see a response saying that the file has been copied. (If one of these commands give a type error in the error in your next post).

  If everything is successful in type

  Output

  and press ENTER. Remove the CD and allow Windows to start normally.

  It's always a good idea to make a backup of your important/emails etc documents before attempting to repair a PC (just in case something goes wrong). Because you do not have Windows, you will need to take the hard drive on your PC and attach it as a 2nd or slave hard drive on another PC work. This will allow you to see it as a drive E: or F: (or the next drive letter, it's free). You will then be able to copy the data on the hard drive of the computer to work.

  I hope this helps.

  Edit: Afterwards, I know you said, nothing has been installed recently, but you might want to look at this article: http://support.microsoft.com/kb/885523. The article describes the situation even after installation of SP2. Maybe the SP2 has been installed inadvertently through Windows update?

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Laptop to stop randomly and it says kernel mode trap

  whenever im in the middle of something my laptop stops

  It says kernel mode trap. it restarts... can't understand wat is it... Please help me... my it was not more than 2 months since I have this laptop

  desperate for solution en

  Original title: kernel mode trap

  Hello

  You really need to contact the seller and the manufacturer of system support. In OEM for system
  Maker is responsible for the functioning Windows and hardware. So no matter
  of cause, it is to solve. And it is under full warranty and may need repair or replacement.
  Keep in mind do you more they will say that it is something you have done. Added as
  even if you are somehow able to solve the problem you would still want it documented just in case where
  There are other related issues on the road.

  ==============================================================

  If you really want to solve the problem that I do not recommend to a new computer:

  In 'some' case will help this article.

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
  online systems), their resources and the drivers and ask in their forums (if any)
  on known problems. Don't forget to update BIOS, drivers of low level chipset,
  and the other pilots of major on-board and separate devices. Those who alone can
  set all or part of these issues.

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate Windows 7 methods and use them on Windows 8/8.1

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
  a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
  steps of shooting.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, although it
  are other causes. Power electric low could also lead to this. Use the above troubleshooting utilities
  and below and when you get to the drivers and segments of memory see below then
  go back troubleshooting if necessary.

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if
  No (remove the cables and the relocation of their aid to eliminate minor corrosion). On a laptop
  on everything that can be done is to reinstall the memory.

  Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget
  to update your drivers manually by using Windows updates only detects certified pilots and
  Microsoft and the manufacturers are far behind in this process. Update the BIOS of the card NETWORK, WiFi, and
  Display/video and other important factors.

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or
  Support from the manufacturer of your system.

  --------------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  UNEXPECTED_KERNEL_MODE_TRAP parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.

  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.

• 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.

• 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.

• 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault:
  • A kernel stack overflow. This overrun occurs when a cover page is hit, and the kernel tries to push a frame. Because there is no battery left, a stack overflow results, causing the double fault. If you think that this presentation has taken place, use ! thread to determine the limits of the stack, and then use KB (display Stack Backtrace) with an important parameter (for example, 100 KB) to display the full stack.
  • A hardware problem.

Less common trap codes are:

• 0x00000001 - a system call - debugger

• 0 x 00000003 - a breakpoint in the debugger

• 0 x 00000007 - a statement of material with no present coprocessor coprocessor

• 0x0000000A - has corrupted Task State Segment

• 0x0000000B - access to a memory segment that was not present

• 0x0000000C - access to memory beyond the limits of a stack

• 0x0000000D - an exception not covered by another exception; a protection fault concerning violations of access to applications

For other numbers of trap, see an Intel architecture manual.

Cause

0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

Resolution

Debugging: Always start by the ! analyze extension.

If this extension is not sufficient, use the debugger kv (display Stack Trace) command.

• If kv shows a taskGate, use the command .tss (display task State Segment) on the part before the colon.

• If kv shows a frame, use the command .trap (trap display frame) to format the shading.

• Otherwise, use the command .trap (trap Display frame) on the appropriate framework. (On x 86 platforms, this frame is associated with the procedure NT! KiTrap.)

After using one of these commands, reuse kv to display the new battery.

Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

Check that all hard disks, controllers, hard drive and the SCSI adapters are compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
* 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

===========================================================

It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
Microsoft drivers - update those without drain in their names (and BIOS and chipset).

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now click on
Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
Click on - uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Windows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

Windows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

========================================================

Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).

How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

How to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

How to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

If you need a USB Flash Drive recovery or other methods:

How to create a recovery USB in Windows 8 & 8.1

http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

Boot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html

--------------------------------------------------------------------------------------

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool for memory Windows 7 (and 8) - in Windows 8 the
the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

======================================================

After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8 posted at the top of the first answer above).

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">