paper won't be pulled into printer

Similar Questions

• J4680 printer, paper won't status bar.

  Had a printer extra few years kept in stored dry basement, all-in-one printer Officejet J4680 but never used. Recently set up and connected by wi - fi with success, but the paper remains in the status bar. It won't pull the paper up with the printer. Blinks saying "load paper in paper, then press OK", but the paper is in the tray. Sounds is performed when pressing the copy button, appears a material turning inside the printer, but does not move out the paper tray? Our other L7780 printer will not print any text and have students who need print papers & two printers seem to have problems & will not print. Please help with a solution as soon as possible.

  Hello allcooljazz,

  Please click here to access the troubleshooting steps that should solve the problem.

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• error to load paper in the tray of the printer

  Although I have a lot of paper in the tray of the printer, my hp c309g-m all-in-one printer screen tells me to load paper, that is, the clip from the sensor to the rear does not work (the one with the Green Strip of rubbery material about it, I guess.) I removed and put it back on a few times, thinking it was wrong set, but it didn't work.  I cleaned the rollers, etc., too.  I try to use the same types of paper, I used for a year without problem.

  I have half of my book printed and don't want to change printers because the quality is not exactly the same thing. so, I would BE ESTATIC IF someone COULD HELP me to SOLVE THIS PRINTER.

  Thank you very much

  You need to contact HP about whether a repair is possible.  It is a hardware problem, not a software problem, and you can do that in Windows can ignore this error.

• My lexmark wireless printer seems to not work whenever I run paper he says not comm.with printer

  I have a lexmark wireless printer that seems not to work whenever I run paper, its says not comm with printer

  Hi chinny111,

  ·         If it works well before?

  ·         Did you change?

  ·         What is the operating system installed on the computer?

  You can see the following Lexmark article and check if it helps.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  Respond with more information so we can help you best.

• Hewlett Packard Officejet 7000 e809a thick paper won't load

  Hello

  have problem wit my new habit of wich HP Officejet 7000 load dense environments like the 150-200 g/m2 an i just have no idea why, when it should support the card up to the 200 media and photo media up to 280 g/m2, no way here is a video and a few attached pictures on what is happening with paper , resembles paper crashing to something inside the printer

  http://www.pasteall.org/PIC/22538

  80 g/m² a4 Office is responsible for relatively thin same a3

  on paper of driver installation is anything I put or how much paper is load (thick paper BTW charges fine when I put it wide sides as on a3 size) any operating system even problem under windows and linux

  question is what I would do with this issues

  60 to 105 g/m2 paper tray
  Office paper paper 180 gm is outside specification.

  Kind regards
  ERICO

• Tellin me it's out of paper - won't print

  I have a deskjet F2430 all-in-one it was printing ok then started to jam.  I followed all the instructions online and clean the rear rollers.  They were very good.  When I tried to run a test of the rto page he always tells me it is out of paper.  The first seeing yellow flashes.  No matter what I do the same thing is happening.

  Any help would be greatly appreciated.  The model # is CB743A.  It's a F2430.  I tried all the documentation at HP. I am on Windows 7

  Thank you

  Susan

  @susan33437 what you can do to correct the printer does not pick up the paper is described in the document following the link. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  The printer is not looking upwards or the paper feed

  HP Technical Support call case form

  @cbs1986 essentially the same thing. What you can do to correct the printer does not pick up the paper is described in the document below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed

  HP Technical Support call case form

• HP envy 5545: envy 5545 off paper msg on the color photo prints

  about 3 weeks.    the drivers are up to date.    total number of color prints - 8 full letter size pages.

  good color prints up to our days.

  now get the paper error message when you submit a color as photo printing.

  good black text prints and copies the right color with the copy function.

  then, only the color impression causes the out of paper message.

  tried to send printing to hp win10 laptop, hp printer app on kindle fire hdx, emailing the print job on hpeprint.

  what I tried to solve this problem:

  1 back by pulling the power plug with the printer on,

  2. reset to the factory settings of menu specifications,

  3. software checked for compatibility of paper output.

  Oddly enough, I stop the machine for 24 hours and the next day the color prints were very good.

  heat as a radiator or Sun n, t a factor;  However, the deep sleep was for several hours.

  I, m glad I have a second printer hp for backups!

  Thank you, thank you for your time and concern.

• LaserJet CP1525: Laserjet CP1525 generates errors 'paper jam' on almost everything I print and there are no jams

  Hello everyone, I have a Laserjet CP1525 who I am troubleshooting for a colleague, and no matter what we do whenever we try to print, we get "paper jam in tray 2" "clear jam and then press {OK}."

  I checked this printer up and down and everything autour and there is no jams, there is not a coward or a sheet of paper, the platters, and linings are very clean, I opened all the doors on the printer, but we still have this isse. Toners are all fine, black, it becomes weak, but it is quite the impression that I was able to print a single test page.  I don't know what else to do. Any help is greatly appreciated.

  Thank you!

  How old is this printer.  How it was used.  On this engine, I saw a lot where the roller is worn and it won't pick up the paper.  The roll is kind of a pain to change, but on what I laid out with this issue, once I have change the roll everything works fine.  Remove the tray paper and printing tilt up and with a flashlight he will shine on the roll.  Do not touch the roller.  There should be steps on the roll that you can see.  Most of the time there are only steps on the outside or the inside only and the rest of the roll is smooth.  If this is the case, you will need to change the roll.

• HP Laserjet M401A: HP Laserjet M401A not will mark the different paper size and tray on the printer properties

  Hello all.

  I have a custom paper size in question and the plateau in the properties of this printer.

  I would like to implement three different printers on the same port, to print directly on a specific tray (without going into the properties of the printer and select the appropriate tray and size).

  I have this printer with the additional third tray.

  I implemented the A4 in the Tray 1 (bypass), a custom size in tray 2 and 3 on the printer.

  When I enter the printer PROPERTIES I want to set up the paper size in tray 2 and 3 value. No question.

  The only sizes I see is 13 x 8, a4, a5, letter, legal and so on (there are choices may 7).

  So, I choose NON SPECIFIC.

  When I go to printer PREFERENCES, I can set up my custom paper size.

  But when I choose my custom paper size, tray 2 and 3 go away and I can choose only bypass or Tray 1.

  If I attributed to A5 (for example) the tray 2 and 3 re - appear.

  How is that possible? where I'm wrong?

  Thank you very much, any help would be appreciated.

  See you soon,.

  Luca.

  Hi Luca,

  That is expected, custom paper sizes are supported only on tray 1.

  Tray 2 and 3 are supported specific sizes of paper.

  You my find graphics of the following as a reference, it lists a paaper supported size for each tray:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=5096252&docid=emr_na-c03303423&docLocale=en_US

  Kind regards

  Shlomi

• I had a paper jam. I removed the paper from the front. Now, printing is blurred. Do not print color

  HP Officejet 6500 all-in-one

  Hello jeanneTemkin,

  All by removing the jammed paper from the printer something may have gotten potted in the printer causing the blurred impression. There are a ton of troubleshooting not to go into that might solve the problem, so for me to document all alone in a forum post would make for a very long page.

  Here is a link to an article that deals with the HP troubleshooting print quality problems

  Troubleshooting print quality problems

  I jump a few sections as some of the steps will not apply to you. Assuming you are using Windows, I suggest that this section ""Solution 6: print and evaluate a Print quality Diagnostic Report ' and, from there, depending on how the diagnostic report quality comes out will determine the next steps. "

  If the article does not help to solve your problem then if you could provide me with information a bit more as this model of printer you use.  The Officejet 6500 has quiet a few models. There are the E709n E709a, E709q, E710a and the E710n. Although for the most part very similar there are differences in lag that can make a difference in the steps to your question.  Also know what operating system will help determine appropriate measures, even though there is no much difference for this issue if you use Vista or Windows 7, it is if you are using Windows 7 compared to a Mac.

  I would like to know how the article works for you and then to provide the additional information if required.

• Heavier weight paper that can be used to print on

  E-all-in-one printer, HP Officejet Pro 8600 - N911a: I usually use inkjet paper that is 24 pounds.

  My Question is: what is the heaviest weight book that this printer can handle?

  We need to use a paper with heavier weight for the divider tabs.

  Thank you, Bob

  It looks like 90-110 is the highest based on the specifications. Dividers should be well below this, so this should work very well.

  Weight, recommended 16 to 28 lb (plain paper); 60 to 75 lb (photo); 20 to 24 lb (envelope); 90 to 110 lb (map)

• As if paper jams in the two sided printing mode

  HP Officejet Pro 8500 has Premium

  Windows 7 64 bit

  Paper jam

  When I try to copy or fax from the document feeder, the document tries to recharge as in print mode both sides, however, only mode is selected. When the paper is trying to load a paper jam message is generated and pray a reloading of the document.

  I'm sorry that you are having this problem with the printer. Here is a document that deals with paper jams when you use the ADF on the printer. It will provide troubleshooting steps to try to solve the problem. I hope this helps. http://goo.GL/MXWnM

• Photosmart 6510: By default, Photosmart 6510 printer Photo paper tray when you use e printing and airprint

  How can I get the default tray for main tray in electronic printing and air instead of photo tray? Everything is set to main tray by using the Printer Wizard. No problem when you print a document directly from the computer.

  Thanks in advance

  The HP ePrint app is available on the Apple Store. When you open the app and are looking for a document to print, you should see a few options to select the paper settings and other options before you click Print to print the document.

• canceled the document because it would print now, he won't disappear so I print another document

  I have an officejet J4680 all-in-one of wireless and home to cancel a document of mapquest, because he was taking to long and now it won't go away so I can print other documents

  Hello

  Try the following.

  In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
   
  Restart the computer and you should find that the documents have been deleted.
   
  Kind regards
   
  DP - K