Indicator battery S10 - 3T

Similar Questions

• Tecra Z40 - A - 16 c - indicator battery life problem

  Hello

  As from 2015, I own a Toshiba Tecra Z40 - A - 16 c.

  I noticed a strange behavior regarding the battery life indicator. When the laptop is fully charged, the indicator shows 100% remaining. And when I use the laptop, the percentage drops slowly, as expected.
  However, as soon as somewhere around 50%, the indicator is suddenly decreases and says he has only 5 or 4% left and I should switch it on immediately.

  Any ideas on how to solve this problem?

  Kind regards
  Oliver

  The battery may need calibration. Load and unload completely several times.

  If it happens again, the battery needs replacing. You can check the level of wear using HWMonitor from cpuid.com.

• Satellite Pro L500: amber flashing indicator - battery won't charge

  When power charge light blinks yellow.
  Battery does not charge and if the battery has been removed the laptop stops.

  When this problem does not occur.

  In addition, when the power cord is removed, battery charge for a few moments then yellow flashing lights and load stops. When the stop, the battery charges normal and 100% charged battery gives almost 4 hours of time.

  Can you please guide on the problem. Is the power supply problem? or the battery? or the card mother/material?

  How to check the problem?

  It seems that you already posted a similar topic topic with your laptop a few years ago.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63225

  In the first case, it seems that your battery was the troublemaker.

  You are talking about charging light. I m not very well what LED it should be.
  There are 5 LEDs - from left: DC IN / power / battery / HDD, ODD / Bridge Media Slot

  The first DC IN indicator lights green when power is form adapter correctly provided HQ. However, if the output voltage of the AC adapter is abnormal or if power outages computers, this LED will turn off.

  The second left power led lights green when the laptop is turned on. If turn you the phone mode standby, this indicator flashes orange.

  The third battery indicator show the conditions of the accusation of pulp. Green indicates that the battery is fully charged, orange indicates the battery is charging and orange blinking indicates a low battery level.

  Question:
  Are you able to turn on the unit without the battery, but using only an adapter connected?
  Usually, this should be possible even if the battery isn't inserted.

• Tecra R850, battery "plugged in, not charging".

  Hello
  I'd appreciate some thoughts on the problem.

  The problem:
  The battery is not charged. The icon in the status bar indicates that the battery is "connected" but that it is 'not charging' and 'remember to change your battery.
  Something similar to:
  https://BD23.HTTPS.CDN.SoftLayer.NET/80BD23/142.4.51.106/images/consider-replacing-your-battery.PNG
  In addition, the battery charge indicator is off

  What happened:
  I was using the computer on battery power. During use, the message appeared that the battery is critical 3% and computer suddenly stop (or went to sleep/hibernate). It is possible that the battery was empty, since I was not charged for 2 days. Which was weird, is that I do not have the message that the battery is at 7%, which is normal warning that I get.
  The next day, I plugged the computer power cord started. At the start, computer called I want to boot into 'Safe Mode' or 'Normal '. I selected 'Normal '.
  Then I noticed the problem described above.

  History:
  Nothing in particular. Notebook is less than 2 years old. Battery was at six, now has dropped to about 4 hours, but had no previous problems. No power surge, does not drop the computer, etc...

  Comments:
  -L' computer works without battery, only on the power cable.
  -L' computer does not react if I put only the battery, without the cable, even if it is said that the battery has 9 percent. (he says there are 3% before the initial stop, however)
  -When I plug in the power cable, the battery charge indicator is on for 2-3 seconds (in orange) and then is off. This happens whenever I take the cable out, then in.
  -What is strange, is that every time when I disable networks wireless/mobile using "Flash Cards" and restart the computer, they are 'on '. Previously, this situation will only occur when the computer crashed, or I made him stop (holding the power button)
  -J' tried what was suggested on the forums of Toshiba:

  * 1
  §Remove cable power, battery, clean contacts, put everything back in place
  §Leave to load a few hours
  -> Indicator battery charge was not on a few hours after the

  * 2
  §Remove battery, start the computer
  §Go to the "Device Manager".
  §Uninstall method to control compatible ACPI Microsoft battery
  Computer §restart
  § ACPI Microsoft settle again
  Computer §shutdown
  §Put battery, start the computer
  -> No change, still do not charge, indicator is not lit

  * 3
  Also have interpreted 'Factory reset '.
  §Apres recovery and restart, there is no change
  §Cela time, when I turn off the networks wireless/mobile using 'Flash Cards', they remain "off" even when I reboot a computer, which was not the case prior to 'Factory reset '.
  §However, if I take the feeder and then place it in (while the computer is turned off) and then start the computer, wireless/mobile networks are once again 'on '.

  Any thoughts?

  Thank you
  Miodrag

  On the picture, information is displayed: consider replacing your battery. This means that the battery is defective somehow.

  I guess you need the battery help, another tested good original.

  I don t Jules Destrooper that there is some sort of problem since you've already tried the factory reset recovery software and computer laptop. Problems of software, this procedure should resolve any software related issues. But it was not.

• Equium A300D-13 x - No battery is detected

  Hello

  Recently, I thought it would be time for me to buy a new laptop for my Toshiba Equium A300D-13 x from the current battery is so old, I get about 5-7 minutes to load off of him.

  So I looked online and shopped and the official Toshiba who were £140!, to remedy that I opted for a replacement which was about £20 (cheap).

  Anyway, the battery is the same exact battery toshiba model number official I have and that is the exact same voltage 10.8V. However the battery is not detected in the laptop?

  What is interesting is that the battery powers the laptop he just doesn't tell me how many remaining charge, I left. Also when it is plugged to the AC does not detect, it looks as if he is in charge the laptop as the clear meaning that the AC is plugged is on, and the battery indicator orange (charging)

  All I have this problem or know what I can do to fix this, as I don't have 140 pounds sterling to buy a new battery.

  Thank you.
  Aude

  Hello

  Have you had the same battery problems with the old, original battery?

  In my experience there are a several batteries 3 third-party but not all meet the standards even if the part number is the same

  But it seems that the battery is detected because the laptop can be powered on using the orange battery indicator battery energy you also show that the battery would be charged.

  However, I would recommend checking the version of the BIOS.
  My knowledge BIOS update might help to solve the problems with the battery.

  If it doesn't help you, I'd recommend testing other batteries that you can order directly from an ASP Toshiba in your country in this case you can be sure that your battery is compatible and works 100%.

• Hi theremy iphone 4S starts showing the percentage of false battery - does anyone know how to fix it help me please

  HI there I'm using iphone 4S with IOS 9.2.1 beginning indicating battery wrong percentage anybudy knows how to fix this help please me

  Please explain exactly what you see. If the phone stops simply by showing a relatively high load, then it's quite possible the battery is bad and must be replaced.

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• Unauthorized battery. Could pose a threat to the security

  I bought this new Z710, but I get a message saying 'battery is not permitted. Also the battery indicator remains at "0% available (plugged in, does not support)." If I unplug the power cord, the laptop turns off cold. It was ever thus. It's a problem for me because I want to update my BIOS but I can't because I get an error indicating "battery is too low (0.< 30="" ).="" please="" charge="" your="" battery="" to="" 30%."="" when="" i="">

  How can I get this laptop to start to interact with its battery? I've tried it out and put new and restart.

  I spoke with a Lenovo support person who agreed that there is a manufacturing defect and said that they would send me a spare battery within 3-10 business days.

• EliteBook 8570w: laptop battery does not display a proper load

  Hi, I had this Elitebook 8570w for about 3 months now and have taken excellent care of it (and the battery), but the battery is facing up.

  This problem just started today. The indicated battery charge is not correct. It says it has, say, 70%, but stops because the battery is too low.

  When I plug in and turn on the back, it displays the correct percentage, but as soon as I unplug it the percentage starts show wrong again.

  I tried reinstalling the driver, but it has not solved the problem. Right, it is said it is 79%, but I know it should be about 20 to 40%.

  Any help?

  Hi @Shekel-Man.

  Thanks for posting your question on the Forums of HP, I see that you have a problem with the  8570w Elitebook which is classified as a commercial product (business).

  Our sales support team provides support through this platform.
  If you need immediate assistance, you will need to open a session one business with our sales support team.

  Click here for more details.
  Let me know if you want more information and/or assistance.

  I hope this helps. I would like to know how this happens. I really hope that the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Satellite Pro SP6100 does not start Help!

  Machine refuses not initialize, green power indicator, battery charge while off.

  Press the power button the light flashes orange 8 times then stops. Some flashes seem more than others. Is this a problem of firmware BIOS?

  If Yes, how do you get a load of the firmware on this machine, have pressed the ' key to the left of the keyboard when the unit is turned on. And the power led remains green if the USB disk is not accessible. This machine lacks a built-in floppy drive.

  Thank you

  Hello

  These flashes are a blink code! It is an error code for technician to recognize the problem faster!
  When you have this code flashing, you can assume it's a hardware problem!

  The best way to fast is to contact a Toshiba Service partner. They can tell you what part of the laptop does not!

  Sorry!
  TOK

• BlackBerry Smartphones and five icons home screen - I am very confused

  Just got a 8520 on AT & T. My "home screen" is made up of the intensity of the signal icon, icon of Wi - Fi, time and Date in the upper part, the SSID of the network I can be connected to, indicator battery and profile - this is at the top of the screen.

  At the bottom of the screen are 6 icons and somehow they all ended up to be the message profile that I put in place, so it's ok. IF I hit the Menu button, I get the rest of the icons/folders in a 6 X by matrix. That's ok too; I can easily move icons in this area, em file within the application files, replace ONE of the 6 icons at the bottom of the screen.

  IF I press THE MENU BUTTON AND hold pressed JUST a MORE HAIR THAN NORMAL - and this is the background of my question - between the icons on the top screen and the low screen (6) icons, I get a 'bar' with 5 icons random orientation, that is, I don't know how or why they are there.

  I've seen posts here and elsewhere - I assume "crackberry" is a term of Endearment between users? -people having problems with their "darlings" and I wonder if this could be what I see, a favorite bar. IF this is the case, can someone please tell me how I can or IF I can place the icons I want in this bar of the home screen mysterious (to me)?

  And just FYI, it is up-to-date in its software revision. As soon as I got the Desktop installed software he wanted until the software so...

  Thanks in advance.

  Scott

  jscottz wrote:

  IF I press THE MENU BUTTON AND hold pressed JUST a MORE HAIR THAN NORMAL - and this is the background of my question - between the icons on the top screen and the low screen (6) icons, I get a 'bar' with 5 icons random orientation, that is, I don't know how or why they are there.

  These icons you see are the applications running on your phone. There are 5 that are always on and running in background: browser, phone, home screen, Messenger of BB and Messages.

  If you have other applications running, they will automatically appear here.

  As for the 6 icons at the botom of your home screen, here 1 6 icons you see when you hit the key BB (not pressed, simply by pressing once). You can move any icons you want in these 1st 6 positions so that these applications can be reached easily from your home screen.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• Satellite R850 - faulty battery indicator? How to calibrate?

  My Satellite R850 stops at about 70% of the battery capacity. It is not suspended, just power off. Market is possible only when the AC adapter is reconnected. My first guess is that (after only a year of daily use), the battery had its best time and must be replaced.

  But why the battery indicator only shows the right capacity, so I can get a warning to low battery power?
  Is there a tool or method for recalibrating the battery?

  Hello

  To me, that shows that your battery is defective.
  Usually sooner or later each battery needs to be replaced because the battery life is limited.
  I have no idea how old your battery is but in my case the battery is 5 years old and he hold the power for about 2 min only. But the funny thing is that the battery indicator indicates battery is fully charged (100%).

  However, you can extend the lifetime of battery a little bit. You need to calibrate the battery from time to time in charge and discharge of battery. This procedure should be repeated several times is the row
  But I guess these calibrations and your battery failure doesn't help much.

• Tecra S10-I can't boot from the battery alone

  Hello

  I replaced my laptop battery and once I installed the battery pack with a compatible battery Toshiba-no, that my laptop won't start not from the battery alone (Tecra S10-114) after starting was performed by the power adapter (without fixing the battery), I installed it and the OS (WIN7 Professional) recognize and recharge the battery regularly.

  I can unplug the AC and the laptop works fine until there is enough battery power. Battery plug is almost the same as the original (5100mAh - 1BRS PA3588U 10.8V) - 10.8V 5200mAh replacement battery Toshiba PA3588U-1BRS PA3356U, etc..

  Can you help me understand why he has just this problem starting and the rest works well?
  You have a solution?

  Thank you
  Luca

  > I replaced my laptop battery and once I installed the pack of battery with a compatible battery Toshiba not my laptop does not start from the battery alone

  Maybe you should use a Toshiba original battery.
  Get in touch with Toshiba ASP in your country that could send you an original and right part that is compatible with the laptop.