infected file ndis.sys deleted by AV. system cannot start in normal mode

Similar Questions

• error message when removing a program "an installation support file could not be installed, the system cannot find the file specified" _

  Try to delete a file from the Program Neighborhood Agent, so I can load a different version.  When I try to remove the program through the Control Panel, it says "an installation support file could not be installed, the system cannot find the file specified."

  Hello rarif, welcome.

  I recommend that you try and that you use the Windows Installer Cleanup Utility (WICU).

  1. go in:
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  2. download the utility and install it
  3 run the utility from START > all programs > Windows Installer Cleanup...

  4. find the program you want to uninstall, then remove the
  5. next, restart your computer

  Let us know if this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L300 - 16L: bootmgr image is corrupt. the system cannot start

  Bootmgr image is corrupt. the system cannot start

  Why is this?

  Have we lost all files etc on the laptop?

  Its a Toshiba L300 - 16L 'versatile Base '.

  Any help would be great - thanks

  Wayne

  Well, the system on the HARD drive seems to be corrupted.
  Who knows why, but it happens sometimes, it s nothing unusual and, therefore, it s always recommended to backup the data always

  The files are not lost, but you are not able to start the unit.

  What you can do?
  Well, you can grab the laptop again.
  By using the HARD drive recovery option (press F8, repair my computer, drive HARD recovery) or by using the recovery disk

  But this will format the HARD drive and you will lose data.
  If you want to get access to the data, I recommend booting of live CD WinPE and BartPE.

  Google for more details...

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• BOOTMGR image is corrupt. The system cannot start.

  Toshiba Satellite L355: MODEL No.: PSLD0U-00800 X

  Start the computer, a black screen with the wording of the "BOOTMGR image is corrupted.  The system cannot start. »

  Use the Applications/drivers, satellite L350 series windows vista Home Premium 32 - Bit SP 1 comes with the laptop in the DVD player and Toshiba Recovery and you will see the loading of the window.  After a certain time.  Screen pop up as Windows boot manager below:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your computer manufacturer or the system administrator.
  File:\windows\system32\boot\winload.exe
  status: 0 xC0000001
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He did not show the original image from all the instructions on-screen (System Recovery option).  How the diagnosis without system recovery option to find the laptop computer component failure?  First impression of the BOOTMGR image is corrupt is the failure of hard drive, but I replaced the new hard-drive(SATA 2.5"MOMENTUS") and tried used the disc of discovery.  The result displays same window boot manager as described above.

  What is the suggestion to the exception to send to the repair shop?  Thank you

  Hello

  Your Toshiba did not come with two discs? One allows the Startup Repair - start a boot and press F12 for
  Select DVD as the boot device.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Unable to boot Windows vista-windows boot configuration data file is missing required information-
  Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  If necessary:

  Toshiba support - click on connect and contact the technical support and/or forums
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Boot MGR imagine is corrupted. System cannot start

  Computer guard stop and then he said: image of Boot MGR is corrupt.  System cannot start.  What does that mean?

  Hi Richard,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: follow the steps mentioned in the article below to rebuild the BCD store by using the Bootrec.exe tool

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".
  http://support.Microsoft.com/kb/927391

  See also the article below

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Computer does not start, it goes into the repair system or start windows normally.

  I restarted my computer because my internet is blocked, and when he went straight to the windows repair. I chose 'Launch startup repair', but that just black flashed then went back to the same screen. So I chose to start windows normally, and restarted, it went back to the same thing. It retains, even in safe mode, etc. It's a Lenovo X 200 tablet, I got to the end of 2007.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon

  Mick Murphy - Microsoft partner

• After that Avast Anti-virus where infected files have been deleted from Windows now reports "not authentic".

  run Avast boot time virsu scan... for a few filoes have been deleted as infected... when the widows restarted I received a ": successful Activation" screen but now the lower right corner shows "This is not a version of windows geniune" how, why?  I paid a lot of money for windows ultimate...

  Some tutorials for you...

  Windows Vista Validation issues:
  
   http://social.Microsoft.com/forums/en/genuinevista/threads

  Windows is not genuine.
  A response from Keith, Microsoft Support, moderator. Date: April 29. 2010
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/6efea9fd-70a9-4530-88c8-93fd7b2d5484

   

  How to activate Windows Vista
  http://support.Microsoft.com/kb/940315

  Activate Vista by phone
  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  How to contact a Microsoft Product Activation Center
  http://support.Microsoft.com/kb/950929 submit a request for technical support for Windows genuine
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/submit-request?displaylang=en

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Deleted a virus now cannot start a program or open files

  I've corrected the problum thamks

  Hi Mark,
  This problem occurs when your .exe file associations are broken. This is usually caused by malicious software that changes the default file associations in Windows. Follow these instructions to resolve this problem:
  Download exeHelper from one of these two links: link 1, link 2 double-click exeHelper to run the fix. A black window should appear. Once the patch is finished, press any key to close.
  I hope this helps you.
  Brian

• Temporary file path is not valid. LR cannot start. Mac OS10.4.11 LR 2.7 Mac

  Need help. Just go open LR and get this message. Then it closes. I ran DiskUtility and fixed permissions. Still no workie.

  So what temporary file path is he referring? Where is he?

  Any help would be appreciated. Thank you!

  All process (same GUI) will be an environment that he spent, and a part of this environment is the path to where the temporary space can be used by the application.

  Somehow it is missing, which I've never heard of on OS X. I suspect it's a problem with how the Lightroom app package is installed, which means may there is one of these times a relocation can actually help. Move the old Lightroom app directory/packet in the Applications of the road first.

  Things less invasive you can try first:

  I guess you rebooted the system? Try cleaning the temporary directory. You should be able to find it by opening a Terminal and typing "echo $TMP".

  [Later]

  Check that/var/tmp (you need to use the Terminal to access this folder) is cleaned on reboot. If this is not the case, make sure that there is and it is almost empty. You will probably not be able to delete anything there that you are not the owner, but we want to see is that it is not filled with hundreds or thousands of directories and files of higher level.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• 3.6.28 Firefox crashes after every start in normal mode, safe mode and Profile Manager too. *.Sqlite with sqlite shell file cleanup has not helped. WinXP

  Firefox does not work in any mode, I can see that the Mozilla Crash Reporter window.
  These crash-report nas was made:
  https://crash-stats.Mozilla.com/report/index/93e1c441-8294-4173-843a-2e71a2121217
  I don't want to upgrade to version of Firefox, so what can I do to continue using 3.6.28 version?

  This isn't a useful battery in this accident report.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if that helps.

• My Satellite L20 system cannot start.

  Hi guyz,
  I just signed up now all hoping someone can help me with problem am with my laptop toshiba L20... who was be a very recent laptop that was made in October 2005.
  A friend bought the laptop in Germany and down to me sent to Nigeria, I only used the phone for only 2 weeks... on January 8 after the use of the laptop I stopped it all went well and I packed it in the bag, it came with. That following January 9 released carefully connected system cable powere and then put on the system started as usual with the message of welcome IN TOUCH WITH TOMORROW... TOSHIBA... BUT to my surprise he just remembered there for 2 minutes and then suddenly I heard two beeps... and then he showed me two errors fixed default drive... and error0260 system timer error error0200 then underneath saying press f1 to resume or f2 to enter setup but the problem now is that the keyboard does not work yet at all nothing works all crashes right there... pls

  I beg u guyz help me pls pls
  THX

  Hi Timothy,.

  Two beeps indicate that this notebook missed you during its initial loading of the POST and BIOS. This is the point where your system runs a self test on its connected devices before loading the operating system.

  Without other diagnoses, it will be difficult to say exactly what may be the problem and you will need to return the device to a service that is authorized for the investigation under the guarantee.

  Kind regards

• Home CD not active - WinXP virtual system - cannot start from the CD to install WinXP

  I'm new to this product, although I used vmware customer a while back on a Windows System.

  I have a P4-24 base system. G Intel chipset with new CD/DVD IDE burners/readers.

  These are both on IDE1 and nothing is on IDE2

  I have two drives SATA WD120G who are the active disks.

  ESXi 3.5 installed OK and I can create a virtual machine using the VMware Infracstructure customer.

  When I start the client machine I have CD/DVD host will start the Windows XP CD, but it fails

  to do so. I tried the option to use the client CD started the power upward, but so far I can not install the WinXP operating system

  on the virtual machine. I even unplugged of the DVD to limit the scope, but that made no difference.

  It's almost as if the virtual machine cannot find the CD/DVD drive.

  Can someone suggest a resolution?

  

  I never use physical media (do not say that it does not work) - I use the ISO. I find in situations like yours is to mount the iso for the virtual machine outside the parameters of the virtual machine - simplest method, you will see an option to connect to cd/dvd in the menu in the VI client.

  Another thing - you will need to connect a flp buslogic image to a floppy drive so that the XP VM can see the buslogic controller (so you can see the hard drive) for installation of the operating system.

  http://virtrix.blogspot.com/2007/09/vmware-installing-windows-xp-on-esx.html - this link also has a buslogic.

  If you find that you don't have enough time to interact with the menu of the loader boot - set a delay at startup in the settings of the virtual machine to 5000ms - this will give you 5 seconds.

  I hope this helps.