Info DC 7700 Convertible Minitowers (CMT) of the motherboard?

Similar Questions

• DC 7700 Convertible Minitowers (CPU Upgrade)

  I have HP DC7700 Convertible Minitowers with CPU Intel (r) Pentium (r) D CPU 3 .00GHz.

  I want to change my processor to another, what is (maximum) CPU Options for my motherboard?

  Hello:

  For a free update problem, the max you can install is Conroe E6700 2.66 GHz processor.

  If you install the latest update of the BIOS, you may be able to install the E7200 E7300 or E7400 processor, but I can't say for sure.  The so-called BIOS update adds support for the E7xxx processors.

  The E7600 will install, but the FSB will not run at 533 MHz instead of the 1066 MHz, to what it is supposed to work.

  Thus, I would not waste my time with that one.  The E7200 E7300 and E7400 may have the same problem, but I don't know.

  HP has been informed by some members of the forum on the issue with the update of the BIOS and the FSB of 50% speed, but they have not done anything, and I doubt that they will ever be.

  If it was me, I stick with the E6700 Conroe and enjoy a free issue, no upgrade hassles.

  Info official processor upgrade is on the link below, page 9.

  http://h18000.www1.HP.com/products/QuickSpecs/12543_ca/12543_ca.PDF

• HP Compaq dc7700p: how to fix '1801 Microcode Update error' HP Compaq dc7700p Convertible Minitowers

  Hello

  I read and read this post for a few times and I'm not sure it will work on my PC so I have to ask, how to solve '1801 Microcode Update error' in HP Compaq dc7700p Convertible Minitowers I upgraded it with E7200 instead of the original E6300

  Here is the product number: p/n RN120ET #UUZ

  I am in a position to start and start windows, I don't know is that it works normally or not, I'm just bored with the startup message:

  Please HELP and thank you in advance!

  Hello:

  You must upgrade the BIOS to version to get rid of the error of microcode, and processor at half the speed of the FSB only works because the update of the BIOS was not written for the E7xxx processors work correctly.

  You will need to run this software whenever you enter windows and change the multiplier up.

  Or you can run this batch file listed on the bottom of Web page so that it runs automatically.

  http://CrystalMark.info/software/CrystalCPUID/index-e.html

  If I were you, I just install an E6700 Conroe and have an update without problem.

  You will need to use the BACK base flash because I don't think that there is an update of the BIOS written for W7.

• HP dc7800 Convertible Minitowers does not restart

  I recently bought a used HP dc7800 Convertible Minitowers. It works fine, but there is a question I leave me puzzled: whenever I restart the computer through Windows, it will not start correctly. Sometimes it shows the HP splash screen and goes just a black screen, and sometimes it shows the HP splash screen and restarts repeatedly. What is more strange is that shut down the computer and put on still work manually, and the computer will boot normally.

  System information:

  OS: Microsoft Windows 7 Ultimate 64 bit SP1

  CPU: Intel Core 2 Duo E6550 2.33 GHz

  RAM: 6.00 GB Dual - Channel DDR2 @ 398 MHz (6-6-6-18)

  Motherboard: Hewlett-Packard 0AACh (XU1 PROCESSOR)

  HARD drive: 149GB Western Digital WDC WD1600AAJS-60B4A0 ATA Device (SATA)

  I agree Rick, that may be the problem.

  I don't see any BIOS date of issue (look under Vista) have nothing to do with Bitlocker or or boot up/reboot issues.

  I don't have the latest BIOS installed 1.32 at the time.

  I bought the PC used on eBay and the seller had put W7 Ultimate 32 bit on it without loading the drivers, etc. and just shipped.  Nor have I received any key disk or installation products.

  I got such a lot of things on it and I didn't care what OS he had.

  I wasn't going to let on in any case, because my plans were max out of the memory of 8 GB and install my copy of W7 Pro x 64.

  In any case, I just tried but updated the BIOS to get W7 Ultimate to work normally (just to see if I could help all the other people who were stop and start loop question).

  Everything I tried was unsuccessful.  And the thing is, some people dc7700/dc7800 ran very well with W7 Ultimate.

  It was just a handful of us who could never make it work right.

  My suggestion you Cinos, must abandon all hope to get to work and install W7 Pro or home (if you do not need to connect to a domain).

  No one I know has reported to solve this issue.

• HP Compaq dc7800 Convertible Minitowers

  Hello

  New to the forum please bare with me I have a

  HP Compaq dc7800 Convertible Minitowers (CZC7413306) and want to update the graphics card without much expense I have short listed two cards. NVIDIA GT 630 and the GT640 Nvidia.

  One of these can receive free updates on the PC, IE PSUS?

  There 4gig of RAM onboard and at present a 7600gs Nvidia who struggles with FSX and can't not watch run them more than I I'd like to run two monitors.

  Thanks for any answers

  Concerning

  Stewart

  Thanks for the graphics card. It seems that they should work, but I still think there may be a problem with the amouint of the power supplied to the card in the slot of the ISDR - x 16.

  It would still be useful to measure the power supply to see if an upgrade PSU will fit. An upgrade to a 450W Corsair or OCZ PSU will be not much ofexpense. When you consider what you have in the PC at this time is minimal, that would make it useful. In any case, these are my thoughts on this subject.   , Of course, it's your choice.

• HP Compaq DC7800 Convertible Minitowers - hard drive upgrade

  I have a HP Compaq DC7800 Convertible Minitowers XP Professional running.  The vehicle currently has a 80 GB hard drive.  I want to switch the hard disk.  How can I find out what Western Digital 1 TB hard drive will work?  I asked WD, and they said that I needed to contact HP.

  Hello:

  You may have a problem upgrading to a SATA III.

  Please see what lower thread and my personal experience, installing a WD SATA III HARD drive in my dc7800.

  http://h30434.www3.HP.com/T5/TouchSmart-PC/TouchSmart-610-1030f-hard-drive-replacement/m-p/2952801/highlight/true#M21430

• With my HP Compaq DC7800 Convertible Minitowers audio driver problem

  Hello

  I'm having a problem of sound driver with my desktop HP Compaq DC7800 Convertible Minitowers.

  A few days ago I formatted my desktop PC and installed a new Windows XP Service pack 3. Like I need driver for my device, I managed to find all the drivers except for my audio device. As I saw that I have integrated audio on my motherboard, but the drivers I found on a HP support site (download the drivers), none of them work and there are too many (I also need to download drivers for other devices form intel site but that's another question). So, now I was hoping someone can help me find (finally) and install peripheral audio, so I can finish with the installation process. I will be grateful for this veeeeeerrrry thanks in advance.

  It does not matter. I found the driver that I needed: ADI high definition (HD Audio Driver - Sound Max)

  thx anyway

• Z210 Convertible Minitowers: Z210: a USB 3.0 card 4 ports compatible?

  I have an Z210 convertible minitour, who currently holds the HP 2 port USB3 SuperSpeed card that is based on the older NEC chipset. It sits in the Slot 3, a PCIe2x1 slot.

  I know that the NEC chipset is pretty old now. But the real problem is that I need a few USB3 ports. I saw a thread here that has considered this question, but does not really all specific maps, and it was related to the Z400, another machine.

  I have had a look and it seems that many tech enterprise vendors offer a card, the CP-4PTU USB 3.0 4-Port PCI Express Card (PG0480) anyone know if it will work in the Z210? Other possible cards?

  TIA!

  Map of NEC had two exits USB3.  HP went with a 4 ports TI chipset based '2 + 2' PCIe card for Z400/Z600/Z800 workstations.  The 2 + 2 means two aft and two if you want to forward.  Z620/Z820 integrated this same TI chip on the motherboard.  Thus, drivers for chips Z620 TI of these workstations work very well for the card on motherboard both chipsets on PCIe.

  I use these TI cards based on my workstation xw6400 and xw6600... they work very well, and I plug them into the second port of PCIe x 16 spare for the max bandwidth of PCIe type II location in the xw6600.  The xw6400 has no connectors all PCIe gen II, however.

  The rear bottom of basket of the map has two ports for two accessories USB 3.0, and there is an addition of port Unified on the map (front) which you can plug a double cable end adding two more USB 3.0 ports (front).  I love the face cards Akasa... high quality and more than enough before long.  They have one that fits great in the floppy bay area and also one for the wider Bay optical since many work stations now do not have a floppy bay site.

  These cards must be powered with a good 5V power from a SATA power supply or a power Molex adapter... do not load software until you give it only + 5V power because some parts will be not visible by the installation program until they are turned on with adequate power.  + 5VDC is not upward on the map of the PCIe slot... only of the power cable.  I'm actually using an adapter less amperage from the floppy power plugs in my xw workstations, but for higher use AGP, I would recommend the spare Molex or SATA Adapter approach.  You can find these like a map without adapter via eBay sometimes... the complete kit of HP is about 50,00.  Search with google for QT587AA for the complete kit of HP.

  What you don't want to... version 2 ports of NEC.  It is the + 5V power supply to the back of the map that you see here, and only two USB 3.0 ports are possible.  This is in contrast to the version of TI chipset below this image of the NEC version:

  

  The TI version is below... There the power plug at the top and the front port double its rear end, below these two capacitors:

  

  You will see that the front bay Akasa kits include a single outlet that feeds on the back of the card via two cables on two USB3 ports.  Eventually you throw this little adapter that see you at the bottom of the picture near the Middle, generally.

  Here is the HP part number, you can use to search on eBay... you'll usually only find the card on eBay, not kit.  HP power supply cable can be very useful to have, and I've seen those if you buy the kit from HP directly.  Otherwise, you will have to dink with other adapters.  The latest drivers are easier to find on the site of HP Z620 drivers.  Part of HP for the card number is only 661320-001.

• In iPhoto when I add info it closed unexpectedly and I lose the picture I was working on, no idea why?

  In iPhoto when I add info it closed unexpectedly and I lose the picture I was working on, no idea why?

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

• Upgrading a DC7600 Convertible Minitowers - how far can go?

  I have a DC7600 CMT.  I understand HP uses a bios locked and there are limits on what you can do with the MB.  What is the most I could mistake this thing?

  What is the best processor I can go to?

  Assuming I am running Win 7 x 64 how much memory can I install?  Specifications say 4 GB max, is this still true or will it take 8 GB or 16 GB?

  Is its edge 5.1 channel?

  The power supply can be replaced?  What are the limits?

  The motherboard can be easily replaced?

  Support SATA 6 GB/s?

  Presentation and internal specifications. (only accepts the P4 processors): http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00374051&jumpid=reg_R1002_USEN

  The device comes with WIN XP SP2. There is NO support for WIN7. He doess let Vista 32 bit.

  Here is the service manual and upgrade, see pg data memory for 2-9. (4 GB max).

  The block of POWER 365 w is an atypical design. The only upgrade, I found was http://www.atxpowersupplies.com/365-Watt-Power-Supply-Delta-DPS-365BB-A.php?psu=437800-001-DC7600CMT 400W

  If you could change on the motherboard, you lose your OEM WIN XP authentication. Guide parts with numbers:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00404225/c00404225.PDF

  No, it does not support SATA 6 GB/s.

• Retrieve info of preference and site Dreamweaver 3, the end of the migration towards cs5.5 on Windows XP

  I had a hard drive crash in windows xp and have reinstalled windows xp and dreamweaver 3.  I have a backup of all my files in dreamweaver 3, from the old machine, for example & sitename.dws, & sitename Changed.txt & sitename Live.dws, sitename Changed.txt.  I would have all my preferences, ftp, restored etc info but could not find any documentation on how to do this in Dreamweaver 3.

  I tried to replace the following files with the backup versions:

  C:\Progam Files\Macromedia\Dreamweaver3\Configuration\SiteCache

  C:\Program Files\Macromedia\Dreamweaver3\Configuration\SourceFormat.txt

  as these are the only files I've seen which seemed to have been edited using Dreamweaver on the XP machine before the drive failure.

  Is there any Dreamweaver 3 documentation on the preference files names, site files and how to replace the default install files with backup versions?

  Any help is sincerely appreciated that I was not able to understand it on my own.  I considered just replace all the DW install files with my backup, but that would probably spoil the registry and I can't chance that.

  Ultimately I've move into CS5.5 - if ever I my backup the information in my newly installed Dreamweaver 3, is there a way to migrate these preferences, the site info, etc. to CS5.5?

  The 'Put' creates a subdirectory in the file root on the host computer.

  This means that your site definition is not correct.  The path to your local root folder should point in the directory "hostsave.  In other words, hostsave directory * IS * your local root folder.  That being the case, it should not appear in your panel of DW files when you connect to the local site EXCEPT on the very high-end.  It should not appear in any link in any file in the site.  The definition of remote site should just be www.example.com for your remote FTP server and the directory of the host must be "web".

  Who should you get.

• Satellite C50A-1JT - need info from the motherboard to the CPU compatibility

  Hello.

  Where can I find the specyfication of the motherboard?

  I'm looking for information that processors can work on this chipset.

  Best regards
  Alright

  Hello

  To my knowledge, the laptop was equipped with Chipset Mobile Intel HM70 Express.

  More in detail which processors are supported by the chipset on the Intel ARK page
  http://Ark.Intel.com/products/67419

  But even if the chipset would support another CPU, BIOS cannot provide such support.

• Satellite C855 1QE - need info on the motherboard compatible

  I am the owner of a C855 1qe laptop and I need to replace my motherboard.
  The code of the motherboard is H000052630.

  During my Internet research, I was not able to find a new one.

  So I would like to know if there is a compatible motherboard for my laptop.

  Thanks in advance

  Satellite C855 1QE belongs to the PSCBYE series and in General, you can use all motherboards that have been released for Satellite C855 PSCBYE models

  Also Toshiba pulled C855 Satellite in different regions... for example motherboards for Satellite C855 PSCBYU (last letter U means USA) or Satellite C855 PSCBYA (an Australian way) would be compatible also.

• where can I find the info of the motherboard on my computer, I found E93839 LA0531

  I think to try to replace the motherboard and find the numbers on my system, but I believe that there is a 3rd group of numbers somewhere in this topic. Is there a picture or a link where to look for someone can share.

  Thank you in advance.

  Dwight

  Numbers of Dell would be white labels with barcode or QR code starting with CN-XXXXX-XXXXX

  

  E93839 LA0531 isn't a motherboard number or it's a Dell reference number.  Its a regulatory issue. E210882 is a UL number for example.

  

• Work 6 GB/s hard drive IDE oucederomsurlesecondport 3 Gbit/s of the motherboard?

  Hi-
  
  I have HP Compaq DC7700 Convertible Minitowers desktop for home use.
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=3232028 & SPF...
  
  I would like to repalce the HDD (Seagate 160 GB, SATA 3 GB/s) as its problems donations.
  
  (1) do you think that any disk SSD will work with the above motherboard?
  
  (2) if not, SATA 6 GB/s Hard drive with 3 GB/s port of the motherboard above?
  
  (3) these discs hard SATA2 and SATA3 having the same type of power outlet?

  Hello:

  You may encounter a problem if you are installing a drive not HP SATA III any like I did with my dc7800.

  My PC has the first question appears on the document of support on the link below (even if the dc7800 was not among the list of the PCs).

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D & javax.portlet.tpst = ba847bafb2a2d782fcbb0710b053ce01 & sp4ts.oid = 3718645 & ac.admitted = 1379354458533.876444892.199480143

  I had bought a HDD WD Caviar Black 500 GB SATA III and every time I want to reboot the PC or several times in a cold, start I'd get a disc hard not found error.

  Of course, I assumed it was a defective and returned for a replacement disc.  The spare drive did the same thing.

  I have a HP 8200 Elite CMT with a Seagate 1 TB SATA III hard drive.  I put this drive in my dc7800 and it worked perfectly for the last two years, who confirmed to me that the support document affects more than the models listed.

  My recommendation for you would be to get the equivalent Seagate HDD which was in my Elite 8200, which is this one or stick with a SATA II if you can find one.

  http://www.Amazon.com/DP/B004IZN3YI/?tag=mh0b-20 & hvadid = 2478383168 & ref = pd_sl_8m29k5ycix_e