Info on printer

Similar Questions

• New router, same info. Printer does not connect. Help?

  I have a printer all-in-one Officejet 4620 wireless. I have a new router (the same brand and model brand new), and none of my info has changed. My printer does not connect to the internet more. Always has the info saved just does not connect. I had to re - enter the password in all my other wireless devices, but how do I do on this printer? I'm sure it's my fix. I have searched all over the Control Panel, all the web help HP, used the scan doctor and even called HP and they said that my warranty is out I have to pay for my support. Still an issue like this... Was a bit irritating. Or if I have to reset the printer to the factory and Redo setup wizard is too cool. I tried this one on board printer under network without success. Any help on this would be great! Thank you!!

  Let's try here.

  Replacement of your wireless router

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I can't get past info printed/copied from my hp officejet 6500, the original info has been removed.

  I printed a document and one copy of another is about 2 weeks. I deleted the info document from my computer yesterday and deleted my Recycle Bin. How can I recover the info I printed and copied documents from my drive hp officejet 6500?

  There is no memory in the Officejet 6500 containing information printed in the past.

  There may be several ways to recover the data:

  • Use an undelete program to recover deleted data.
  • If you have a hard copy use the 6500 scan into editable text.

• HP laptop / envy 4524 printer: address conflict IP NETWORK/computer PORTABLE PRINTER WIRELESS

  New HP Envy 4524 all in one wireless printer has the following questions and does not connect to HP laptop to a shared WIFI network.

  1. Print runs via Apple look ok
  2. Impressions via USB OK
  3. Refrains E print or via the wifi network.

  Info:

  Printer is connected to a network of "StudentCom" and displays it is connected in the printer settings and has a specific IP address.

  Using HP Scan and print doctor on my laptop cannot see my printer it shows a printer 4520 on a different IP address.

  My lap top connects to the WiFi "StudentCom" same apparent and has access to all other internet services, but is unable to see my printer.  In addition, I use the instant HP ink and it seems not to be on any network and is therefore not monitirong my use. Could there be multiple IP addresses within the same given WIFI network it is an academic situation.

  I'd appreciate any help.

  Thank you

  Path of 1963

  You get connected to the radio of the first school. It could be connected to someone phone portable hotspot, who knows.

• Print 2 panels with a comfirm?

  I want to print 2 panels, a portrait, a landscape.

  Is it possible to confirm one, printing to the same printer?

  PrintPanel does not return the printer used.

  You can enumerate the printers in the system using this way some Win32API calls (here I am filling a listbox with printer on a reminder of button names):

  int CVICALLBACK EnumeratePrinters (int panel, int control, int event,
          void *callbackData, int eventData1, int eventData2)
  {
    int            error = 0;
    int            i, numPrt, needed;
    PRINTER_INFO_1 *pi = NULL;
    char           *z = NULL;
  
    if (event != EVENT_COMMIT) return 0;
  
    //BOOL EnumPrinters(
    //    DWORD Flags,         // printer object types
    //    LPTSTR Name,         // name of printer object
    //    DWORD Level,         // information level
    //    LPBYTE pPrinterEnum, // printer information buffer
    //    DWORD cbBuf,         // size of printer information buffer
    //    LPDWORD pcbNeeded,   // bytes received or required
    //    LPDWORD pcReturned   // number of printers enumerated
    //);
  
    // Get required memory size
    EnumPrinters (
      PRINTER_ENUM_LOCAL,      // enumerate local printers
      NULL,                    // name of printer object
      1,                       // general printer info
      NULL,                    // printer information buffer
      0,                       // size of printer information buffer
      &needed,                 // bytes required
      NULL                     // number of printers enumerated
    );
  
    // Allocate memory
    z = malloc (needed);
    memset (z, 0, needed);
  
    // Enumerate printers
    if (!EnumPrinters (
      PRINTER_ENUM_LOCAL,      // enumerate local printers
      NULL,                    // name of printer object
      1,                       // general printer info
      z,                       // printer information buffer
      needed,                  // size of printer information buffer
      &needed,                 // bytes required
      &numPrt                  // number of printers enumerated
    )) {
      MessagePopup ("Error", "Error in EnumPrinters.");
      error = GetLastError ();
      goto Error;
    }
  
    // Allocate structured memory
    pi = calloc (numPrt, sizeof (PRINTER_INFO_1));
    memcpy (pi, z, numPrt * sizeof (PRINTER_INFO_1));
  
    for (i = 0; i < numPrt; i++) {
      InsertListItem (panel, PANEL_LISTBOX, -1, pi[i].pName, i);
    }
  
    SetInputMode (panel, PANEL_PRINT, 1);
  
  Error:
    if (z) free (z);
    if (pi) free (pi);
    return 0;
  }
  

  The list of printers can be shown in a Panel "options" where the user can select which printer to use, after that you can print with that printer in this way:

  int CVICALLBACK PrintSome (int panel, int control, int event,
        void *callbackData, int eventData1, int eventData2)
  {
    int  idx;
    char name[64];
  
    if (event != EVENT_COMMIT) return 0;
  
    GetCtrlIndex (panel, PANEL_LISTBOX, &idx);
    GetLabelFromIndex (panel, PANEL_LISTBOX, idx, name);
  
    SetPrintAttribute (ATTR_PRINTER_NAME, name);   // Specify which printer to use
    SetPrintAttribute (ATTR_PRINT_AREA_WIDTH, VAL_INTEGRAL_SCALE);
    SetPrintAttribute (ATTR_PRINT_AREA_HEIGHT, VAL_USE_ENTIRE_PAPER);
  
    PrintPanel (panel, "", 1, VAL_FULL_PANEL, 1);
  
    return 0;
  }
  

  Nevertheless, it is a little not intuitive and you need to dig and study some of the Win32APIs to get. You can support this idea CVI for an independent command that displays the print dialog box.

• Printer delete print jobs

  I have a Brother MFC-J835DW printer. I pull up what I want to print from my laptop, press on print, select all the necessary info to print then I hit print. My printer says it is "receiving data" then he says: "deleting print job"... I have re-installed the driver without effect disc. I can't work like this... PLS help.

  Hi quail480,

  You will need to contact Brother technical support on your printing problems with this Brother printer. Here is a link to the Brother support website.

  http://www.brother-USA.com/support/

• Add a printer to the network

  I just reimagee my Windows XP Tablet which has always been on my network home, share 2 printers and internet through a router with no server. Now I can't understand how to add the software to my Tablet then he can print to the Brother HL-2700CN color laser just attached to the router. Can I start by simply load the CD and choose a Standard Installation, non-personalized, then selecting either shared network printer (probably not since no server) or local-to-Peer Brother printer and no local printer cable (USB or parallel). The next page says 1. Search for the network (does not), 2. Specify your machine by IP address (what?) 3. specify your machine by the name of the node (what?)

  I have messed with it for too long and can not understand. I have thought of it when, since then he has worked in the past. Still, it prints from my other pc in the same situation on the home network. I can look at his installation somewhere?

  config info = the [printer] Setup information.   The instructions in theQuick Installation Guide for your printer, you download from HERE , provide instructions to print the parameters of the printer (configuration information).

  See print a printer settings Page 33 page in the PDF file, number as a31 page to print the printer configuration information. You simply press the buttonset on the time of three (3) printer and it should display a page with all the printer configuration information.  This information should contain the IP address of the printer.  Rerun the installation program that you did the other day and enter the IP address of the leaf, when you are prompted for the IP address of the printer.

• printing from a Samsung computer

  Printing from a computer to an HP 6700 samsung.  On the file menu after touching printing don't preview, no preview and after hitting No. Print print. What I am doing wrong?

  healey100

  Welcome to the Community Forum of HP.

  I don't know what you're doing wrong; I can offer the following in the hope that it might be useful.

  The problem is probably not directly related to your printer - print preview is driving application as it is the environment that helps choose the configuration of the printer.  In general, your environment must be set first - in other words, the printer must be installed, by default, selected on the network and ready to go - and then applications can use it.

  First of all, if you have not already done so, please install the full function of the printer software:

  Install full software features - OfficeJet 6700

  Make sure that your 6700 printer is assigned as default printer - assuming that it is the only printer on your network, this happens automatically.  However, if you tend to move everything from one place to another, maybe this isn't the case - you can verify that the printer you expect to see is indeed the "default".  In this case, you want this printer to the HP Officejet 6700.

  Control Panel > set display icon > devices and printers >

  Right click on your printer > ensure / select as default printer

  More info on print preview

  Change size print with preview before printing

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Photosmart D110a problems accessing print apps? Look here.

  If you have installed your Photosmart D110a wireless printer on your home network and enabled web services using the or before June 16, 2010 print applications, you can encounter difficulties of launching applications print on or after June 16.

  A firmware update has been published which will be offered to customers who have enabled web services, if your D110a offers a FW update, please accept.   If you continue to experience problems using Print Apps after the FW update, follow the steps below to remove and add web services.

  1. Remove web services (configuration > Wireless > Web Services settings > delete Web Services)
  2. Add web services (configuration > Wireless > Web Services settings > enable Web Services).  (If you have not accepted the FW update prior to removal/re-adding web services, you will be offered the FW update when you reactivate web services... accept the update to continue.)
  3. Confirm that the sheet of info web services with your ID printers prints correctly after that you re - enable web services.  If the information document does not print, delete and re - enable web services again.
  4. If you had already created an account on www.hpePrintCenter.com and your printer has been added to your account of ePC, to return to the EPC and add use the new ID of your web services info sheet printer to add the printer back to your account

  Sorry you're still stuck, Andrew.

  Try this:

  If you have enabled web services, remove web services before performing the steps below.

  1. Select the installation program (key)

  2. Select Preferences

  3. scroll down and select Product Updates

  The unit will check the available product updates - if some are available by applying them should solve your problem.  You should then be able to activate the web services and prints the Backgrounder web services.

  Please let us know how it goes.

• HP officejet 6500 E710n-z: printer is offline

  My laptop says my printer is offline and will not print anything.  My printer is set up for the HotSpot from Verizon Wireless - info said printer network connections are ok.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• printer says PSC 1200 Series: 'out of paper', but printer is not paper.

  Printer sucked into a pile of leaves, when I started to print a document, rather than a single sheet.  After removing the paper, I have re-load of paper to try new print job, but printing failed info and printer for this device says "on paper."   I was not able to clear this error despite the many re - start, re-loading paper, etc.

  I wonder if the paper sensing switch was damaged when it sucked up so much paper?  If so, actually that now require repair factory?    All possible solutions if it is that or something else?

  Okay - the printer is fixed, but not by me.  My brother took a glance and first determined that there always pulls paper in copy mode.  Who determined that it was not a hardware problem but a software problem.   I don't know the exact details of what he was doing then, but I think he has reinstalled the driver after uninstalling it and/or the software of the printer.   He started again, and Windows 7 has recognized that the pilot and that solved the problem.

  Technical support did not come to the top with that answer - they said it was a faulty sensor and that it could not be repaired and I have to buy a new printer.

  Thank God we don't listen to HP technical support.

• new printer 8500, tried to open a session in eprint, said code has expired a new impression. It print give me cod

  Could not believe that a new printer had expired code.  Info on printer gives me the same code every time. Any suggestions

  Hi tgar847,

  Whenever the ePrint information page prints with the code, it is activated for 24 hours. After that 24-hour code expires, it print again activates the same code for 24 hours.

• print image even out but different dimensions

  I print the same image, but the image is another dimension when I print I need help

  I don't change anything

  Have you printed all the other photos in the meantime because you printed edited this picture?  If so, it is possible that something has changed.

  One way to keep a configuration of printing is to click on the tab [create saved print], which saves the photo and the page layout in a Collection 'print '. You can then retrieve the exact same photo and the configuration in the control panel collections at any time in the future.

  (Press [i] to toggle info window print design).

  Where is the predefined model print?

  In the panels on the left side, there is the sign "Model Explorer. Here are the templates provided by Adobe, but they may not suit your needs!

  For example the model (1) 4 x 6 you would think is for 4x6in paper but actually for A4 paper and 4x6in cell margins. (shown in the Preview Panel)

  Another clue is - when you did a print design that works and which prints correctly, save a 'model' (click on the + in the model browser header). These "model user" will be available to use again with any Photo.

  Do a complete review of all settings in the dialog box the printer Configuration and layout of LR panels. I hope that the success that will prevail.

  And another thought! -you have checked the option "Zoom to fill" - If your photo image is not in the proportions of the exact dimensions of the mesh report, there will be some cropping of the photo with the edges of the photo deleted.

• Installed hp deskjet 5150 printer running on new dell hp deskjet 5100 shows and as the installed printer

  HP deskjet 5150 printer

  Windows 7 Home Premium - 64-bit

  Info computer printer shows NO 5150 hp deskjet 5100 installed,

  No change - computer was new

  I installed my printer hp deskjet 5150, following the signs to a new Dell computer.

  Windows 7 automatically installed the driver from the usb cord was plugged to the computer (it was connected first to the printer).

  Tested the printer by typing a few lines in a Word document, and the printed page.

  However, I noticed that the Dell info on printer shows printer installed is hp deskjet 5100, 5150 not.

  Also, I don't get the screen indicating the ink remaining in the cartridge when I print a page.

  I get a message when the cartridge is low or it prints everything, just not when the cartridge is empty:

  Is the print driver for the hp deskjet printer 5100 the same as for the deskjet 5150 printer?

  I don't want to buy another printer because of the expense.

  Thanks in advance.

  Ouaenre

  The driver is the driver for Deskjet 5100 series which includes the Deskjet 5150.  If you wish you can change the name - go to start devices and printers, click with the right button on the properties of printer deskjet 5100, and then type a new name in the text box, OK.

  There is not a Toolbox in the Windows 7 drivers, the paper here is workarounds.

• Date/time/web address stamp - printing problem

  My printer has always printed the stamp of date/time/site address when the Web well above the edges of the paper up to a month. Now print only about 1/5 of the line and is not readable... other 4/5 printing is above/below the edge of the paper down. I adjusted the margins and the header/footer settings and that did not solve the problem. Any help is appreciated. Have an officejet all-in-one 4620.

  I solved the problem myself... I printed some photos and on properties that I chose without borders, as opposed to (default) border... by trial and error, I found that it was the problem. When I chose with border, the info will print correctly.