Add a printer to the network

Similar Questions

• Cannot add a printer from the network

  Hello, in our House, we have 3 laptops and 1 pc. The 3 laptops were able to print to the printer connected to the main computer. One of the laptop crashed and it should restore it. Once restored, we added to the Working Group and tried to add a printer, but whenever we try we get a window that says: X Windows cannot connect to the printer. Access is denied. We don't know what we can do. Any help?

  Did you add the same user for the new PC you used to connect before the crash?  Are the correct printer on the PC service share permissions allows the user of the new PC? Brian Tillman [MVP-Outlook]

• Cannot add a printer to the network

  Here's my dilemma. I am trying to install a wireless printer adapter and I am running into problems.

  I recently changed routers for my network because I changed service providers. I do not have

  problems installing my printer using my router Westell (Verizon). I configured my printer without problem.

  I went from my ISP at Optimum, they gave me a NETGEAR router and I had to configure my

  printer to a new network (ssid). I followed the instructions as before, but never got to the step where

  I had to put in the network name and password. Instead, I received a message stating: "INSTALLATION OF.

  USE OF OPERATING SYSTEM CANNOT BE PERFORMED." I CAN print if I hard connect my printer on my computer.

  I would like any suggestions that anyone might have.

  My operating system is Windows 7. My computer is a Dell Studio laptop, 1759. My printer is a Dell 2130cn laser printer and my router is a

  NETGEAR N600 (WNDR3400). My first router was a Westell D90-327W18, which as I said before worked without

  a hitch.

  Thank you

  E-mail address is removed from the privacy *.

  Hi Michael,

  If you are using a computer connected to a "working group", click on the arrow next to password protected sharing to expand this section.

  Check if password protected sharing is enabled or disabled.

  If the password sharing is enabled, only people with a user account and password for this computer will be able to access your printer. Disable this option if you want anyone on the network can access the printer you share unless you give then a user account and password.

  Set your printer as default printer and see if it restores the State online.

  You can read this article for more information:

  Network printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems

  Note: It also applies to Windows 7.

  Hope this information helps. Response with status so that we can help you.

• Laser Jet MFP M125nw Pro: Add a printer to the network WPS button

  
  

  Hello

  Do you have any computer? Pop the CD on your computer and start the installation. 10 minutes or more and the work to be done.

  Kind regards.

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• How can I permanently add a printer to a network?

  Hello
  I have a network with 10 knots. Printer is connected to one of the nodes. When I want to connect to the printer, I first connect to this node and add the printer. But when I restart the other PC, the connection between PC and printer fails. I have to reconnect to this node and add the printer.

  How can I add a printer in the list of printers of each PC permanently?

  Hello

  Check out the links that has steps on how to connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  To add a printer attached directly to the network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_setup_direct_printer.mspx?mfr=true

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• How can I add my printer to the customizable menu?

  You are trying to add my printer to the customizable menu on the top right of the screen. When I opened the menu there is no printer icon. When I click on customize there is not a printer available in the menu icon. I wish I could use this feature instead of having to use the top menu bar. With the help of Windows 8.1

  The menu usually has a button entitled Print that evokes actually print-preview. If you want to go directly to print, the fastest way is to use the shortcut key Ctrl + p. It's something of a standard of Windows, so it should work in most applications.

• Computer not finding printer on the network

  I have an OfficeJet Pro 8600 Plus with a wireless connection to my home network, E2000 Cisco router. I have install the printer using the software that comes with it. Everything worked fine for several months, but recently, I found that my network computers are randomly impossible to locate the printer on the network. I am also unable randomly ePrint. I noticed that if I power cycle the router, the computer will then find the printer. Now, I am regularly power cycling the router. Should not have these problems, I don't know even where to start asking questions. I'm not having other problems with the router. I connect to the internet OK, see the other computers on the network OK, just could not find the printer. There are usually 3 different computers that are enabled and disabled the network throughout the day (sometimes using the printer, sometimes not).

  What are some of the common issues that could cause this problem? Any suggestions to make the connection to the most reliable printer?

  Hi there, your PC into hibernation should not make a difference but some common router settings to watch out include:

  •Wireless isolation is enabled (won't let not peripheral connected wireless to talk with each other)

• Computer cannot find the printer on the network

  I have a Photosmart D110A and use a router Airport Extreme to print from my PC and iPad.  Until a few days ago, it worked fine but now neither my iPad or PC can find the printer on the network.  When I run the test report of network on the printer, it shows that everything is fine and dandy.  No the guided HP solutions even to get close to solving this riddle... it seems that any questions they discuss involve the printer will not connect to the network.

  OK, so they are both on the network of comments.  Comments network does not allow for communication between devices.

  Open Airport utility, select your airport and click installation manual.  Access to the Internet zone, then DHCP.  What are the two structures IP DHCP for your two airport networks (invited and regular).

  For example, mine is 10.0.1.X for the ordinary and 17.16.42.X for my network of comments.

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• LaserJet 4050N: cannot connect the printer to the network.

  Hi all

  I recently moved my house, where a new router. My HP LaserJet 4050N was previously connected to my router to another and worked well on the network. However, in my new House and my router (ethernet port connected to the printer) I can't find the printer on the network. I tried to change the IP address, but still when I try to ping, I get the timeout error.

  Help, please.

  Hi Calstar,

  I suggest you uninstall the printer and then reinstall it with the new IP assigned to the printer. Let me know what you find?

• OJ 8500 A910 Pro - iPhone does not see the printer on the network?

  I have my HP OfficeJet Pro 8500 A910 connected to my wireless network.  The printer found the network and now has an IP address.  My iPhone is also connected to the wireless network.  I can see both devices on the router.

  When I walked into photos and try to print a photo, he says to choose a printer.  When I click on choose, I get "No Printers Found.

  Any thoughts?

  Hey k9rescue!

  Sorry to hear that you are having a problem with AirPrint. What iOS version are you running? And what iPhone model do you have?

  Additionally, if you are unsure that your device supports AirPrint, try to turn your bluetooth off and see if the printer appears.

  Let me know if it helps!

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.