Infrared column binding parameter passing does not!

Similar Questions

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• Pass does not work

  Do not know why but last Pass does not. I installed it and it shows on the Add-ons Manager. I have disabled and abled several times and it will not work. What should I do?

  Worked LastPass you previously in Firefox 33, or is this a new installation of LastPass?

  If you don't get a useful answer here, try LastPass forums: https://forums.lastpass.com/viewforum.php?f=5

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• simple pass does not work to open emails

  simple pass does not work to open emails

  Duplicate the content of the Post-

  My os is windows7 IE9 browser

  Pass Simple contact support.

• HP Simple pass does not properly.

  I just bought a HP Envy 17 TS last Friday. And the finger print scanner does not work properly. On the basis of the recommendations of the Forum of Microsoft, I deleted and updated drivers for both the pass Simple biometric and HP.

  Here's the situation. HP Simple pass works for passwords of website and all but don't work try to use it to connect to windows itself. However, if I uninstall use the print and Pass Simple unlock this 8.1 of Windows has its own, it works. Pass Simple to reinstall and it stops working again.

  dmcbain,

  Welcome to the HP Forum.

  There are a lot of Envy 17 over there - I think left, unsaid and you details give a better idea - it should be sufficient because they are similar in nature (structure and file locking).

  It is likely that your laptop came with HP SimplePass version 8.x installed - it's the Softex version and it should work pretty well, and he would be able to get along with native login provided with Windows 8.1.

  You could try the following to see if you can get things back in order.

  Reminder: For best results, do not skip a recommended reboot sequence.

  • Make sure that all of your Windows updates are complete and up-to-date.  This is essential.  On a new system, it takes a few laps and restarts.  Once updates are complete, you can, if you like to put updates 'Notification' for the future.  If you install a new Windows updates, restart the laptop.
  • If you have not yet, download install .NET Framework 4.5.1: Microsoft .NET Framework 4.5.1
  • If you install the framework, reboot the laptop and connect
  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Start > type anywhere 'rebecca' or Recovery Manager >
  • Click here to start the Recovery Manager > under "I need immediate help" >
  • Drivers and reinstall Applications > find and reinstall your driver fingerprint sensor fingerprint validity
  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  Consider: you can probably run the version of HP SimplePass 6.x on this system - it is AuthenTec version, fully functional in terms of features and support webcards and Windows logon, too.

  See the following to download and install HP SimplePass version 6.x.  You can skip the part about reinstalling your fingerprint driver - you have completed this step.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  HP will never call on the phone and ask for money to 'secure your PC.

  Say "No, thank you," and hang up.

  Cybercriminals can call you on the phone and claim to be from Microsoft.

  See: Microsoft Safety & Security Center

  Mark my answer "accept as Solution" when providing a solution or workaround!

  + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• Bug: Dynamic Action on column in a table does not fire after sort column

  I have reproduced this problem on apex.oracle.com.
  
  Use [http://apex.oracle.com/pls/apex/f?p=22057:1]
  user/pw: apextester
  
  I created a dynamic action on a tabular presentation, using a jQuery selector, to check if the misspelled word is null, display an alert and set the focus through this switch. The first time on the page, I can erase a misspelled word value and this dynamic action is triggered. I see the alert. (Focus action seems not to happen, but that is a minor issue.)
  
  I can put the value in their place, select the columns to sort, empty a value of misspelled word again, and this dynamic action does NOT occur. (FYI, there is another dynamic action in this app, save before exit, click OK to ignore the changes.)
  
  I can also access the page, make no changes, sort by header column first, then a misspelled word value virgins and this dynamic action does NOT occur.
  
  I added the "headers" for the report model, td tag attribute to use in the selector. This erroneous behavior is the same, I use #COLUMN_HEADER # #COLUMN_HEADER_NAME or #.
  
  Thank you
  Kelly

  Hi Kelly,

  Take a look at the region advanced dynamic actions and 'Scope of the event' link to 'living '. I think your problem will be solved.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• SImple pass does not load? Want to register Fingprints

  Yesterday, I decided to do a clean boot since my startup has been slow. Now, for some reason, I can't to my fingerprint reader, even if I downloaded again the file at hp support here and installed the program.

  Here is a picture of the screen: it keeps loading and will not let me register new fingerprints.

  

  

  And it wont let me add logon. I'm puzzled as to what I can do next to fix this. Any help is appreciated, thanks!

  I use a HP Pavilion dv6-3225dx Entertainment Notebook PC

  biscuitpeach,

  Thanks for posting.

  I'll try to help you get SimplePass works again. As this problem occurred after a clean boot, this indicates that you probably disabled what was required for the program to run.

  If you want to go back and UN - do the boot, which may help. Just reactivate the brand-new and restart the computer.

  Also, as he was working recently, you can try a system restore. You can bring the ocmputer goes back to a time where he worked: http://support.hp.com/us-en/document/c03327545

  If it still does not work, go to control panel, then programs and features. Uninstall SimplePass, and then restart the computer. Try reinstalling it again once, then restart the computer before using it.

  After that, you can check in the BIOS if the issue is not resolved. Start the computer and press F10 to access the BIOS. Go to the System Configuration. If you see an option for biometric support, make sure that this option is enabled. If you do not see the option don't worry in this regard.

  Well, let me know what happens. Have a good

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K

• Dv7-7240us Rnvy: single pass does not work after upgrade to Windows 10

  Hi all

  I just upgraded to window 10 (took 3 hours, work). However HP Simplepass now does not work.

  Anyone else having this problem?

  Brian

  Hello

  I fixed this problem by using "run programs for previous versions of Windows.

  BrianH15

• Simple pass does not record Web sites visited or passwords

  My Simple Pass is not Simple!  Occasionally will pick up the web sites visited and ask if it needs to store information and the password.  In this case, Josette.  How should I do for each site visited with a password, it will store it?  Thank you

  Retirement, try here.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/fill-in-forms-remember-passwords-AutoComplete#IE=ie-11-win-7

  REO

• Simple report with parameter requirement does not

  I have a simple report, select rows from a table when the date is earlier than a date variable. I have a page with a switch of date and a button element. The button links to the report page and assigns to P3_AS_OF_DATE P2_SELECT_DATE. Page 3 includes & P3_AS_OF_DATE. in the title of the region, as an element of display, and in which paragraph of the report. However, when I click on the Run_Report button on page 2, the date selected on page 2 does not appear on page 3. I can't understand what Miss me.

  I've reproduced my code at https://apex.oracle.com/pls/apex/f?p=4550 & ws = Larimer using assistance/Viewer to connect. The application is called report with Date setting.

  Thank you!

  (There is more to the condition that, so obvious alternatives as an interactive report are not a solution).

  mdwyer wrote:

  I have a simple report, select rows from a table when the date is earlier than a date variable. I have a page with a switch of date and a button element. The button links to the report page and assigns to P3_AS_OF_DATE P2_SELECT_DATE. Page 3 includes & P3_AS_OF_DATE. in the title of the region, as an element of display, and in which paragraph of the report. However, when I click on the Run_Report button on page 2, the date selected on page 2 does not appear on page 3. I can't understand what Miss me.

  I've reproduced my code to https://apex.oracle.com/pls/apex/f?p=4550&ws=Larimer with assistance/Viewer to connect. The application is called report with Date setting.

  The button performs a redirect. This means that the page is not filed and the value of P2_SELECT_DATE is therefore not saved in session state. When the form values should be stored in the database or used in the treatment later, you must enter them in session state using a button that submits the page. Next navigation should be performed using a direction rather than a redirect. The example has been changed to make it.

• XMLTable to extract columns with conditional path does not

  Hello

  I am on 11.2.0.3 and I need to extract columns on a section of XML with conditions on, but I get "ORA-00907: lack the right parenthesis", so I think that the way I go about it is not supported or that I have somehow the wrong syntax or something.

  This is a very simplified what I'm trying to do (there could be several different entries in the < sets1 > and < sets2 > sections and they might be in different orders, is not as if I can always choose the first or the last):

  with sample_data as (select 1 id,
                              xmltype('<root>
                                         <sets1>
                                           <set1><set_name>name1</set_name><set_val>val1</set_val></set1>
                                           <set1><set_name>name2</set_name><set_val>val2</set_val></set1>
                                         </sets1>
                                         <sets2>
                                           <set2><set_name>name3</set_name><set_val>val3</set_val></set2>
                                           <set2><set_name>name4</set_name><set_val>val4</set_val></set2>
                                         </sets2>
                                       </root>') xml_doc from dual)
  select *
  from   sample_data sd,
         xmltable('<root>' passing sd.xml_doc
                  columns col1 varchar2(10) path 'sets1/set1[set_name=''name1'']/set_val',
                          col2 varchar2(10) path 'sets1/set1[set_name=''name2'']/set_val',
                          col3 varchar2(10) path 'sets2/set2[set_name=''name4'']/set_val') x;
  

  What I'm trying to get:

  COL1  COL2  COL3
  ----  ----  ----
  val1  val2  val4
  

  I know that I could separate the < set1 > and < set2 > nodes in their own xmltypes xmltable on it and then join them and make the necessary pivoting, etc., but when I try to start that against only 1000 lines, db do not love and ended my session! Therefore, I'm looking for a more elegant way to do it.

  Is there a way to do this in a XMLTABLE? Pointers are very welcome!

  It solves your problem of sample request and you get the output that show you.

   with sample_data as (select 1 id,
                               xmltype('
                                          
                                            name1val1
                                            name2val2
                                          
                                          
                                            name3val3
                                            name4val4
                                          
                                        ') xml_doc from dual)
   select x.*  -- change
   from   sample_data sd,
          xmltable('/root' passing sd.xml_doc  -- change
                   columns col1 varchar2(10) path 'sets1/set1[set_name="name1"]/set_val',  -- change
                           col2 varchar2(10) path 'sets1/set1[set_name="name2"]/set_val',  -- change
                           col3 varchar2(10) path 'sets2/set2[set_name="name4"]/set_val') x;  -- change
  

  As you can see, I've marked the lines that I've changed.  The error you saw came to use two single quotes in the COLUMN XPath instead to use double quotes.  Then I changed the XPath expression in the XMLTable brackets as well.

  I'm confused on what the columns you really want overall, in terms of how you know which values you want, or did you mean that you want something random sets1 and sets2.

  You store the XML file in a column of XMLType SECUREFILE BINARY, right?  It seems that you made previous visits, but just double check.

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.