Initial installation on Site of retrieval

Similar Questions

• Win 7 hangs during initial installation, asking drivers...

  I'm trying to do a full, clean install on a new generation of PC desktop.  The following are new & just bought today:
  OS: Brand new retail Windows7 Ultimate (not the version of upgrade)
  Motherboard: ASUS P5Q Deluxe (Intel P45 chipset)
  HARD drive: Western Digital (literally brand new, out of the box... never been used or put in shape)

  The problem that I must sound familiar... initial installation block asking drivers (insert the CD/DVD or a USB device with missing drivers).

  -J' have already been on the site of Asus and downloaded the latest drivers SATA Win7 and Intel.
  -None of the pilots comes to me to get past this problem.
  -The BIOS is the last
  -I try not to use RAID functions
  -SATA is set to "AHCI" in the BIOS Setup... another choice is "IDE" with submenus of "Compatible" & "Improved"... the result is the same in all settings.

  Any advice would be greatly appreciated, as I'm currently dead in the water and have dropped more than $1000 & spent more than 7 hours of my time to this today.

  OK, so a couple of things here...

  First of all, thanks to Aziz to try to answer my question, but I respectfully hope that in the future you would read posts more carefully before you answer...

  You wrote:
  - "Try changing the SATA drive to IDE in BIOS and try installing Windows 7"
  .. When in my original post, I said:
  - "SATA is set to"AHCI"in the BIOS Setup... another choice is"IDE"with submenus of"Compatible"&"Enhanced"... the result is the same in all settings ." ".

  You also then have detailed a series of steps that could only be applied if the operating system has been installed & Starter.  I think it should be clear in my description of the problem that I was not able to get anywhere near that far...
  ".. .initial install hangs, asking drivers (insert the CD/DVD or a USB device with missing drivers) ." »

  In the end, I was able to get things to work & I wanted to share my solution for those who can be useful...  For some reason, the "clean install" (NOT an upgrade) Win7 process would literally see my IDE DVD drive during the first installation process.  Obviously, BIOS could see the DVD player, as he was able to Start from the DVD drive... but during the initial installation, it seems that the DVD player simply ceased to be accessible.  Even now, I'm not sure if this was due to some kind of motherboard problem, or maybe a compatibility problem between Windows 7 and my DVD player specific or whatever... the main cause remains a mystery.  I tried all settings possible jumpers on the drive itself (master, slave, cable select, no rider in all, etc)... all to nothing does not.  It is / was not a disk of old, obsolete... it was purchased last year.  I remain puzzled about what has increased.

  Anyway, I knew that the problem was somehow linked to access to the DVD player, I decided to try a SATA DVD drive rather than I had been using the IDE hard drive.  So, I bought a new SATA DVD drive to install in my machine, and finally everything worked well.  Again, I don't know always with certainty what the problem was.  It is possible that I could have bought another IDE DVD drive & tried that instead... that may have worked also, but since I didn't try it, I can't be sure.

  Good luck to other similar questions & I hope this helps.

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  When I install Oracle Grid Infrastructure 12 c Release 1 (12.1.0.1.0), I have the following error:

  Failure of the initial installation of INS-30131 required for execution of the controls of the installer cannot access the temporary location

  Cause:-unable to access the temporary location

  Action - make sure that the current user has required permissions to the temporary location

  Details of the addition

  -GLWB-1560: "/tmp/" temporary directory path is shared on the nodes '... »

  The oracle user I use is to have access in / tmp, I did a test by creating a file here.

  Any idea?

  Thank you

  This is the description of the error, I saw, but he was trying to find an idea how to solve this problem.

  Anyway, I solved it by renaming the Group of volumes and accordingly update the fstab and the grub.conf.

  Thank you

  Eugen

• When I open it gets stuck on "initializing installation" and the green bar does not move. How can I fix it so it installs?

  The installation program of Adobe cloud downloaded on the internet perfectly but when I open it stuck at "initializing installation" and the green bar does not move. How can I fix it so it installs?

  Multiredwolf123 did you use the steps listed in the "Failed to install" error request Creative Cloud Desktop - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to solve the current error?

• How to re - install Photoshop CC after initial installation?

  How to re - install Photoshop CC after initial installation?

  Run the cleanup tool to remove Ps CC:http://www.adobe.com/support/contact/cscleanertool.html . Restart the computer and then try to reinstall the Ps.

  Kind regards

  Ashutosh

• When and how can you synchronize browsers of two computers on the same account after the initial installation?

  I can't find any instructions on how to synchronize Firefox browsing data after the initial configuration is completed and the account is established. Everything that help guard reference section to be put in place, but not how to perform the synchronization operation after installation.

  Firefox syncs automatically, but you can force a synchronization by going to the Tools menu, and then click Synchronize now.

• Satellite L450 - initial installation of Windows doesn't seem to finish

  Hello

  just bought Satellite L450 and initial Setup seem not completed, restart and went to set up 10 times or more finally abandoned and turned off.

  Will welcome screen but when clicking on administrator says "your account has been disabled.
  See your system administrator?

  Hello

  Why you n t try to restore the system again.
  Start Notepad, press F8, choose repair my computer and then choose the Toshiba HDD recovery disk.

  This should start the new recovery procedure that should help you to complete the installation.

  See you soon

• Is it necessary to choose the password during the initial installation, or can be done later?

  I'm about to turn on a new office for the first time.  I understand that Win 7 will ask me to create a password and create a password reset disk.  What this has to do during this initial configuration of the system in the first session to go ahead?   Or can we pick a password at a later date and also to make the drive to reset later?  In other words, is to choose a password and reset disk optional or required the first time through these configuration screens?

  For Windows 7, you can leave the password empty and you will not be prompted to enter a password at startup, you can do the same for Windows 8.0/8.1 if you choose to connect without a Microsoft Account. Unfortunately, the installer for window s8.1 tries to force you to connect to a Microsoft Account but you can choose to not sign selecting create a new account and then sign with a local account. Usually, I have install Windows this way as theres likely to make many updates and reboots. I usually then assign the password once Windows is up to date.

• Cannot install After effects 5.5, impossible to go beyond "Initializing Installer."

  I bought a copy of legacy 5.5 for mac (OS X Yosemite) and when I click on the 'Install' red icon, a window that says "Installer initializing" is displayed. There is a loading bar at the bottom of the window "Install initialization" and after that the bar has filled (finished loading), the window disappears and nothing happens after that. How can I fix it?

  Are you talking about 5.5 AE or AE CS 5.5? 5.5 was released in 2002 and will not run on Yosemite. If it's CS 5.5 while these requirements are:

  

  Make sure you have the latest installer. Yosemite is OS X 10.10 one that is far from 10.6. You can get into trouble. CS5.5 was released in 2011 and 10.6 in 2004

• admin password doesn't work do not since the initial installation of the CF 11

  I just do an install of CF 11 three times today, and the password that is created during the installation does not authenticate.  I have read several posts, some dating back to may 2014.  Is there a fix for this problem?  Certainly the recommendation to change a browser is understood as I use IE, but still what is the fix?

  Try this:

  • Navigate to the root Web of your site.
  • Make a backup of the web.config file and open it with a text editor (Notepad, etc.)
  • Comment the entry for ".air" as the MIME type extension
  • Save the file and restart IIS.
  • Launch CF Admin and try to connect.

  Also try the passwordreset.bat (C:\ColdFusion11\cfusion\bin) via the prompt (run as administrator)

• Satellite L750 PSK1WA: Can I change from 32-bit to 64-bit after initial installation?

  I chose 32-bit during my first installation after buying my L750 PSK1WA-03C00R with i5 2410 M CPU.
  Can I change to 64 bit so that I can access the 8 GB of RAM that has been installed.

  Thank you.

  Hhmmm I think that this should be possible. You have to start the process of recovery once more
  Check this Toshiba HowTo: how to do a system recovery
  http://www.MyToshiba.com.au/support/items/FAQ/71

  1 press and hold the power button for ten (10) seconds to turn off your device.
  2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.
  3. when the Toshiba screen appears; release the 0 key.
  * 4. If you are prompted to select 32-bit or 64-bit operating system; Click on suivant.*
  5. When you are prompted by the warning screen; Click Yes to continue the system recovery.
  6. Select recovery of factory default software; Click Next.
  7. Select Restore to out-of-box state. Click Next again.
  8 Please read and acknowledge this last warning screen
  9. click on next to start Recovery

  This could also be useful if you're wondering why you didn't receive the disc:
  http://www.MyToshiba.co.nz/support/items/FAQ/69

• WiFi configuration after initial installation

  The first time I put my master's degree in my Mac, it set up everything, including the Wifi.

  With download problems from my workout data to the Web site, I decided to reset my master's degree to factory default.

  Now, I want to setup the Wifi, I go through all possible documents and manuals how to do this, but I am able to do it again.

  Where and how can I configure my Wifi again?

  Thank you.

  When you connect the usb cable and its synchronization finished, you should have a toolbar on the upper left side. Click devices and scroll down to wifi syncing, I think that's what his name. That should do it. It will be useful.