Initialization of the USB

Similar Questions

• View and redirect USB - Office at initialization outside the firewall

  I've been painting these forums looking for a solution to this problem.  I can connect to my Windows 7 Professional VM without problems via the secure SSL protocol, but after login on the USB tab at the top, it says "initialization of the office."

  Now I have seen and read a lot of posts here, and I am sure that this has something to do with my router/firewall physics.  I put a Client computer on the same local network (inside the firewall) and it loads and works very well, complete with USB Redirection so I know that the actual configuration is fine.  However, when I do the same thing from a computer outside my firewall, it gets stuck.

  After reading the other posts here, I forwarded your port 32111 to my server from view, and that did not solve the problem.  I even went as far as to put the server on DMZ and always the same result.

  So to summarize-, it works very well from a computer on the same local network, but when coming out from the local network, it does not.

  Ports, go to the server to display:

  80, 443, 4172, 32111.

  Could really use a few suggestions here.

  OK, so it seems that your environment from view behind a NAT. Tunneling is probably necessary here (see http://pubs.vmware.com/view-50/topic/com.vmware.view.installation.doc/GUID-0FC59EB4-45DA-4B3C-A611-F6B5597E9F0C.html), you must make sure it is on, then make sure your connection to the server can also obtain the MV Office on port TCP 32111.

• Installation of OS 8.6 or 9.2.1 via the USB port on the new world Mac?

  Hallo!

  I have submitted a similar question pertaining to the installation of Mac OS X 10.1 - 10.3 via USB drive in the section "Mac OS X 10.3 and more", so if you saw that please also answer here.

  Here's the situation: I have an iBook Clamshell G3 233 MHz 265 MB SRAM 16 MB of VRAM with 1xUSB port 1.1. I need an operating system installed and the only alternative for Mac OS 8.6/9.2 or OSX 10.1 - 10.3, who is eligible for this machine is PowerPC Linux, which I can only install a copy CLI (Command Line Interface only) of Ubuntu, I strongly prefer not to use. I tried all the methods of creation of the copy USB Installer, I mentioned in paragraph three of this post:install OS X 10.0 - 10.3 from USB on Mac New World? for Mac OS 8.6 and 9.2 disks as well. I have the installation disk OS 8 detail (8.6 green disk with large 8 and photo inside the loop at the bottom) as well as the installation of retail 9.2.1 universal disc (with the big orange 9 on the label), however the CD - R drive is completely shot, as mentioned in the above linked post it can read the disks, but it cannot initialize a boot drive and takes an hour to recognize / + 20 minutes to read a disk sector so the direct installation of disk option is completely.

  While unlike the case in the post above, I can actually get my 9.2.1 installer USB disk copy to start, the copy of 8.6 installer refuses to even be recognized in the boot selection menu (Option at startup) and when I boot the 9.2.1 USB install, I get the notorious "the software of the system at boot drive only functions on the not so copied original media on another drive." message.

  Once again using my CD player - R is out of the question. I did so that the image is "locked" before writing the USB disk, set permissions for image for 'r - r - r -' and formatted the drive as 'Mac OS Standard' (HFS) before writing, and I still got the message. Here are the best: I've used "ResEdit" on a separate Mac OS 9 installation to remove the 'xboo' resource that checks for the media type of the program "/ System/system files", copied the contents of the installation CD to a folder, replaced "/ System/system folders ' with the amended version, creates a new. Master image CDR CD size 665, 8 MB , the size of the original drive, moved the folder with the copy of the installation disk for the installation of OS 9 separate existing, blessed the 'File system' directory, moved back, filled with the contents of the disk image (including the program updated the 'system'), disassembled the new image, 'locked', set its permissions to "r - r - r" - and wrote directly to HFS format USB drive using sudo dd if = «» image path"of = / dev / 'USB drive number' fixed permission on the new USB installation disk, and he successfully started the installer to OS 9.2 modified in menu selection of boot HOWEVER, at the start of the poster Installer always the same message:" the software of the system at boot drive only functions on the original media, don't if copied on another drive. " Even if the function to manage this scenario has been removed, and all permissions are set up correctly.

  I'm doing something wrong? It is even possible in ANY scenario to install Mac OS 8.6 or 9.2.1 installation disk backup direct, or via a USB disk/Flash Drive? Or do I have to buy a new iBook CD - R drive and a Torx T6 screwdriver to replace it just to reinstall Mac OS? Like I said before, we will find more details on the methods tried in the variation of Mac OS X this post link above, so for more information or overview Setup OS X with a USB drive instead of Mac OS just reply to this post. Any help or suggestions are appreciated, and I need an operating system installed on this machine outside the only command line Linux evil. Thank you!

  Mac of this generation will only boot from the internal drive, CD or Firewire.  I just heard rumor a few PPC Macs can boot from USB and it is probably for some OSX version.

  I don't know if target disk Mode or it works for OS9 boot: install 10.4/10.5 on a Mac with a broken / or incompatible optical drive - https://discussions.apple.com/docs/DOC-1020

  Please, do not cross post multiple for one. It is very difficult for people who are trying to help you be able to track what has already been said, especially if we seek the other topic (you do not provide a direct link).

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Interrupt the USB plug PC CVI

  When I plug in the USB of my application on the PC, I can communicate with the USB using CVI8.5 and nor-visa link.

  I use a method of querying to detect the USB plug. After detecting the USB plug, I initialize the USB link.

  How can I generate an interrupt when I plug in the USB application, I need not the method of voting.

  Paul

  Hello Paul,

  How good are you with the 'concept' USB?

  If I understand correctly, then the problem is not located in CVI itself, but more related to access to USB devices in general.

  A guide very useful tool that I myself used also (in a personal atmosphere) is the following:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff540174%28V=vs.85%29.aspx

  You write your driver from scratch.

  Is there a specific reason why you don't want mark?

  Also something useful can be the following document.

  The following document could also prove to be very useful:

  http://www.codeproject.com/articles/18062/detecting-USB-drive-removal-in-a-C-program

  At a certain level, you should check "windows messages" that are produced by windows. The tutorial above should introduce some of these concepts.

• C309a error message: remove the USB from the printer device

  My C309A was connected wireless via time capsule or Airport extreme for a year to the network & work find on all Macs. There was an update of the HP software to 2.4.1 on 01/07/10 and since then it won't work. I have reset to default settings, more #/ 3 reboot and it goes through the initialization process but the network configuration wizard cannot find the wireless network and the same error message finally backup on the screen and you can't do anything unless you turn off. He can come back and do not have an error code next time, but it will not find the network either... so you can shut off again and the next time the error message appears. There has never been whatever it is connected to the USB port. I have re - installed software and still have the same problem.

  Please need help or suggestions. Thanks in advance.

  E-mail: [text removed for privacy]

  Here is how to contact HP.

  Please remove the serial number of your post (Options > Edit Post).

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• data recovery - can't read a disk using the USB drive cage

  Original title: I have a few documents in Windows 98, I need to read the hard drive on a desktop DEll 530 which is SATA and Vista.

  I have a Vista OS and I need to read files stored on a computer with Windows 98, I drive hard on and have an adapter that has a PATA SATA and IDE port and plugs into the USB port on any computer but when I go into disk management it says I need to initialize the disk , but when I try on the MBR it says disk not ready, I don't want to format the drive, I need free and accessible files. What should I do? I have no funds for it either. Any suggestions? Please feel free to respond to my personal E-mail, it is as follows: * e-mail address is removed from the privacy *. Thank you that all suggestions will be appreciated

  Hello

  There may be a problem with the drive, the USB case or even the wiring.

  Since its control of important data with a real computer store (the one that makes its own
  maintenance in the House and not of leeks and glances at a Best Buy or other stores).

  Also be sure to check with the help of the external USB adapter.

  I hope this helps.

• The initialization of the external hard drive

  I don't see the external hard drive, WD450AA, in an enclosure closed when I look in the directories of the computer, but I can see it under "Disk management" in the management of the computer.  This drive came a Compac and still has XP on it.  I have files on what I would like to copy.  It is said that it is "not initialized".  When I right click to initialize, it will finally tell me that the "device is not ready".  The rider on the external hard drive is set to 'Master '.  I tried 'Slave' and 'Cable Select' without success.  I also checked that all the drivers are updated for my hade 6700Y PC with Vista Home Premium.

  To see if the problem is domething on the computrer rather than the HD or its enclosure; try to connect the player to the USB port on a different computer.

  Tom Ferguson

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer?

  Is there such a thing as a USB wireless, that does not need USB cable upstream that goes into the usb slot in the main computer? I've looked everywhere but I can't find one. I hate the son, and I try to clear my desk of as many people as possible.

  # USB is cable only.

• MacBook retina cannot find the USB hard drive when it is plugged again

  Hello world

  I have a MacBook retina 2015 computers and a hard drive WD elements USB3 that I use as a Time Machine backup when they travel. The drive is plugged into the USB - C through one of the Apple dongles and when I first start the computer, the USB is mounted and that it appears on the desktop. He does everything very well.

  When I want to take the machine away, I eject it, wait for the secure message and then physically disconnect the drive. However, when I go back and reconnect the drive, the Mac did not see it. The reader will be able as the light comes on and I can hear it turn. Just, it is not mount and is completely invisible for MacOS.

  I checked all connections, even used another dongle - no luck. A disconnect does not set, and I tried to reset the NVRAM. So far, the only solution is to reboot the Mac, afterwards the player reappears - at least until I need to unplug it again.

  Anyone got any ideas what is underway and if there is a fix?

  Thank you very much

  Mike.

  Hello, Mike Richards2,.

  Thank you for using communities Support from Apple!

  This is I think understand that you are not able to see an external hard drive when it is ejected, and then reconnect the computer.  I have some suggestions that I hope will help you.

  It is important to try to isolate what is responsible for this.  The first thing to do to help isolate what is causing the problem is to start the computer in what is called Safe Mode and see if the problem persists.

  Start in safe mode:

  1. Choose the Apple menu > shut down.
  2. After your Mac stops, wait 10 seconds, then press the power button.
  3. As soon as you hear the startup tone, hold down the SHIFT key.
     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  OS X El Capitan: start in safe mode

  Once the computer is running in safe mode, see if you can duplicate the issue.  If the problem does not appear, go ahead and try to reboot normally again.  If the problem has disappeared, it may have been caused by a problem of file or directory of cache fixed by booting in safe mode.

  If the question comes up, you'll want to check the login items.  Follow these instructions to remove the connection:

  OS X El Capitan: If you think you have incompatible connection points

  Remove the connection, restart the computer and see if the problem persists.

  Have a great day!

• Content of the USB accidentally in the trash can

  Some how I accidentally placed the entire contents of a USB drive into the trash.

  Whenever I insert the disc, its contents appear in the trash.

  I don't want to delete the contents of the usb drive.

  How can I delete the contents of the trash and keep it on the USB key?

  Kind regards...

  Open the Recycle Bin and drag the files from the disk to another location on it.

  (144143)

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.