Initialize the NOR-2548 SPDT with topology using IVI

Similar Questions

• Initialize the array 1 d with predetermined values

  Hi all

  I'm pretty new to the comm suite, but I'll have one (probably simple) question about the initialization of a constant matrix of 1 d. Suppose I want to create a constant 1 d of the matrix of size M and I want to boot with some predetermined values. Is there an easy/effective way to do it? Initializing one is rather heavy, especially for the great Mr. also, how can I initialize such constant on a Traget FPGA?

  I've seen that for example for metering screws, it is possible to define a constant flow of data and initialize it with a .cvs file. Is there a similar possibility to initialize a constant matrix of 1 d?

  See you soon,.

  Steve0

  Hi Steve0,

  I found a quick solution and dirty to do this, as there is not a clear method to implement a constant matrix arbitrarily large. You can generate an array, but you prefer, my example is seen below:

  

  Then go to the front, right click on the indicator and select "capture". From there, this table will be available on your range of data to drop as a constant of other VI in this project. You can also do the same with a CSV file by writing your CSV file to a flag and then enter the data to use.

  BeenCoughin

• Healthcare.gov suggest IE or Chrome. All the reports of problems with Firefox using Healthcare.gov?

  When I get to the point to enter my contact information and click on continue system errors and not move forward. On the chat line with tech support to Healthcare.gov suggested IE or Chrome. Other users of Firefox has had similar experiences. If so, what was your resolution? Thank you. flbob

  You may need to enable cookies from third party if the parameter visited does not work.

  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try a new private window (which uses a separate set of cookies).

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• Error 1074097808 (Initialize with Topology.vi niSwitch)

  In trying to "initialize" the PXI-2527 switch module using "niSwitch Initialize.vi", I get the following error

  "Error - 1074097808 occurred at niSwitch Initialize.vi.

  Reason: unable to load dynamic library.

  "Name of the library: niswitchDAQmx.dll.

  I can see the switch module and configure the channels in niMAX. I reinstalled the software 15.0 NOR-DAQmx, 4.8 OR-Switch and NI Switch Executive several times to see if all the missing drivers would be restored. Also, I searched the entire hard drive, the Web site or Google, search FTP sites available and the NOR install discs, and I have not found such a driver under the name of "niswitchDAQmx.dll". If it's the simple solution, could someone please point me to the site where I can download it. I am running Windows 7 on an embedded controller with LabView 2013 SMU-8135. The module includes a PXI-4065 DMM and 2527 OR-Switch with a TB-2627 (Terminal). I have attached a screenshot of the 'NI Max installed hardware", a screenshot of the error message, a screenshot of the code segment and a screenshot of the software installed (OR MAX). Also, I am able to communicate with the 2527 switch OR use NI MAX "Test Panel", but I'm not able to create a DAQmx task for the switch (ex: resistance Signal acquisition). Any suggestion would be great. Thanks in advance.

  micgraph,

  Long story short:

  You will need to reinstall the COMPLETE OR-SWITCH 15.1 (link) and make sure the following option is selected. Installation with the default options * SHOULD * install this component and solve your problem.

  

  Long story:

  In order to allow smaller installs components helped break the driver and activate the dynamic dll loading. This allows customers to install a smaller part of the driver. (Instead of install to all HW, you can install it with the type "SwitchCA1, 2, & 3" [install huge] or with the type 'SwitchCA4' [small Install].)

  It seems (glancing at your MAX configuration) that you have installed the version 15.1 of the Runtime 'SwitchCA4 '.

  When you have completed the installation of the full version of NOR-SWITCH 15.1.1, it should appear in MAX with additional options.

  

• Use the iMac 5 k with Macbook air as a second screen

  Hello

  I just bought an iMac 27 "5 k new and I want to know if I can use my Macbook Air as a second screen and if so what cable do I need? Ive read some stuff claiming the 5 k unusable with a second monitor, but this looks like it could mean that the iMac can serve as a second monitor?

  Thank you

  You're right that a k 5 iMac can be used as a display of the target, but cannot a MacBook Air to use your iMac as a display with the target - Apple Support Display Mode

  Nor has any video in ability.

• iPhone (with iOS9.1) initialize with backup using iOS9.1: incompatibility problem

  Hi guys.

  I bought an iphone 6s (mounting iOS 9.1) and tried to initialize with the iCloud backup made with my previous iphone 5 using iOS9.2.

  When I try to choose the back upward, I got a message saying "no backup is compatible with iOS 9.1 present on this phone.

  What can I do to solve the problem?

  Thank you

  A typo in in the subject...

  iPhone (with iOS9.1) initialize with backup using iOS9. 2: incompatibility problem

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• NOR-DAQmx compatibility with the system in real time

  I try to use a time system 11 with LabVIEW Real-time. When I try to connect with the driver OR DAQmx, an error saying that the version of the NOR-DAQmx drivers are bundles with the one on the real time. I tried to use different versions of the NOR-DAQmx drivers that are available in the table of compatibility, but not those who worked. I have an old computer working with the same real-time system that uses LabVIEW 9 and has the driver NOR-DAQmx 9.3.5 f0 driver installed on it but I can't find the drivers on the web. What should I do?

  I am using LabVIEW 2015 in my current computer.

  Thanks in advance.

  Looks like you can just have a lag in the versions of software installed on your host computer and the target.  In order to deploy the code from your host to your target, the two must have corresponding to libraries of functions.  See this link for instructions on updated versions of the software on your target match those installed on your host computer, the wizard of the LabVIEW RT software.  If you have already done this, and it did not help, please provide a screenshot or error code of the message that is to appear.

• Get samples of the clock machine (NEITHER with NOR cDAQ-9172-9422)

  Hey guys

  I'm trying to produce data for the position of a 1000 Hz all about stamping press with an absolute encoder which is connected to the NOR-DAQ.

  Two not that I am trying to program, but can not understand:

  (1) use a hardware clock to trigger the acquisition of the data at the selected speed

  (2) synchronize the three data acquisition modules I have to ensure that all data are received at the same time

  the material I have does not seem to have any counters. A few examples that I read would not go because of this.

  Any thoughts? If there is some examples/tutorials about this problem that I have missed please let me know.

  Thank you

  Hey, Rohan,.

  Thanks a lot for your help. I was talking to a National Instruments process engineer yesterday and it me that the problem was the vi calendar clock source option - instead of using AI/SampleClock, I had to use the time base of 100 kHz clock that did not appear in the list until I checked the option "ListAdvanced Terminal" in the name of e/s filtering dialog box. You must right-click the constant/control of the source of the clock and select I/O name filtering to open this dialog box.

  Thanks for all your suggestions, I'll try to apply it and check the performance.

  Nik

• I can implement using the NOR-6221 SPI? When I try to generate using ctr0 make an error indicating 'Sample clock' is not a supported option.

  I'm trying to use a NOR-USB-6221 to implement SPI in a C++ application.  When I try to configure a digital output task that uses ctr0 as the clock, I get an error stating that 'Sample clock' is not supported and use instead "on demand".  I would be able to use the NOR-6221 and if so how to do this?  Thank you.

  Hi IntAndTest,

  Maybe silly question: are you sure that you have a USB-6221 and not a USB-6212? The USB-6221 supports clocked DIO, but the USB-6212 is not working.

  A problem with your code: when you specify a terminal DAQmx name, it must be is compared to the device (such as 'Ctr0InternalOutput', "AI/SampleClock" or "PFI0") or contains a slash before the device name (like "/ Dev1/Ctr0InternalOutput", "/ Dev1/AI/SampleClock ', or ' Dev1 / / PFI0"). This does not apply to the names of physical channel (like ' Dev1/port0' or "Dev1/ctr0").

  The error is returned from code that you have not displayed? Your says error message DAQmxCreateDIChan failed, but the code you posted does not call this function. In addition, I don't see a call to DAQmxStartTask or DAQmxWriteDigitalU8, U16, U32, whatever.

  Also, what NOR-DAQmx version are you using?

  Brad

• Control of the ZL62044 of Zarlink with NOR-4851

  Hello

  We use Zarlink ZL62044 unit which is a 2 sons but not standard I2C.

  I'm am tryng to read and write in the Zarlink ZL62044 with the help of NOR-8451 Labview with the I2C read & write VI.

  Eran,

  Actually, looking at it more I realized 8451 can send a receipt of the signal if another master's write data on it. However, we cannot always ensure that the 8451 cannot send an ACK signal because the material on the 8451 follows the I2C Protocol, which automatically sends these signals.

• How to speed up loop DAQ triggered using NOR cDAQ-9174 with NOR-9215 and NOR-9402

  Hello

  I use LV2010 and NOR-DAQmx 9.2.2. I have a NOR cDAQ-9174 with a NEITHER-9215 4 channel 100 k simultaneous ADC and NOR-9402 4 channel DIO module trigger and reset.

  We run WinXP sp3 on a Dell M4400 core 2 duo @2. 26 Ghz.

  I used the code example NI DAQmx for acquisition of tension with trigger HW. My goal is to try all 4 channels on the 9215 simultaneously when a trigger is received on channel 0 of the 9402, after data is read, I use channel 1 on the 9402 to reset the trigger of the target material.  I have a version of this work, however the maximum event rate is ~ 16/second. I have the Setup 9215 for finite samples / 10 samples per channel which is ~ 400uSec of conversion time and I realize he is above in the appeal of vi, but ~ 50mSeconds worth?

  The target detector can put out up to 1 k / event triggers / seconds.  Only, I received a rate of 8 per second and I added the NOR-DAQmx control vi driver and chose "commit" this did double the rate.

  My question is what is the maximum rate of loop for these devices (trigger/conversion/reading device / reset) and start over? I noticed that just let free the 9215, carried out using the 'Acq & chart internal strain Clk' raised only the rate of events up to 20 Hz.

  Thank you

  normbo663

  Hi normbo663,

  You can get this works far better assuming you have an available counter (there are 4 on the backplane of the 9174).

  DAQ Compact supports the tasks of meter output "redeclenchables" that can be used to generate a finite pulse train.  You can set a task of finished meter redeclenchables output to be used as sample for your task of analog clock.  The task of the meter output will be re-Army (less than 12, 5-25 ns) as soon as it's finished out the last pulse.  The task of analog input would be configured to run continuously, but it would only sample based on the output of the meter triggered.  For an example, see here.

  You can reference the internal counters on the cDAQ without signals through a routing module using: cDAQ1/_ctr0 (right click on the chain counter control, then select i/o name of filtering and check channels internal to add these options to the drop down).

  Thus, with the tips above, you should be able to immediately re - arming your analog acquisition on the 9215 using one background basket counters.  It seems that the second half of the application is to use a second channel on the 9402 to reset the trigger of your DUT.  You can deterministically generate this signal so by configuring a 2nd redeclenchables meter out task (single pulse, but this time).  All you need to do is the initial delay on the appropriate value for your analog acquisition.  Trigger this counter on the same PFI line that trigger you your analog task from.

  Using counters to generate the signals you need in a deterministic way, the loop becomes is no longer a problem (as long as your input buffer does not overflow).  You may need to re-read several triggers at the same time for the loop to keep (for example to read 1000 samples each, which would correspond to 100 triggers 10 samples).

  Best regards

• Since the installation of EL CAPITAN, I can't open pictures and iPhotos with photoshop, CS6, nor my mails with Office Word

  Since the installation of EL CAPITAN, I can't open pictures and iPhotos with PHOTOSHOP CS6, nor my mails with office Word

  Hi denisb,

  If you are not able to open the Photos App images directly in Photoshop then, this is the expected behavior as App Photos does not allow for any third-party application interact with it directly.

  You must export images from the Photos App and then open in Photoshop.

  Refer to this link: How to use an external editor with Photos for OSX | IVous

• PS elements 11 cannot use the text function. Error message could not initialize the text.

  When I try to use the text function the letters do not appear. Text feature appears frozen. Get the error message - unable to initialize the text.

  Recently PSE11 uninstalled and reinstalled. Downloaded 2 Google font. Was able to use the text function with Google fonts with no problems. Two days later, attempted to work with the text function and the typed letters appear on the screen/layer. Tried to add the text with fonts pre-installed PS - still once, no text appeared. Impossible to set up a text box. How can I fix it? Thank you

  Suggest that you reset the text tool, that only he can fix.

  I believe in PSEv.11, there is a small arrow, top of the page to the left on the tool options bar. Click on this.

  If the arrow is not there, look in the options bar to the text tool, on the right, for a box with lines inside. Adobe changed the location and icon in later versions of the program.