Ink for OfficeJet 4620 (Vista) level indicator

Similar Questions

• OfficeJet 4620: update Firmware for officejet 4620

  My scanner does not work, and I thought I had the latest firmware would solve. Where can I get the update of firmware for officejet 4620? I found something under the software and drivers, but I don't know if it's the same thing.

  Hi @elianab.

  Welcome to the Forums of HP's Support.  I appreciate that you try to update your firmware 4620's.

  You can download the latest firmware for printers from the HP site.  Scroll down and select the Firmware.

  Here is a link to the page drivers 4620. HP Officejet Firmware CWM1FN1451AR 2.3 MB December 6, 2015 is the latest / up to date firmware.

  Do you receive error messages when you try to scan? I can perhaps more assistance on this issue.

  I would like to know the link worked for you. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• Print double-sided for Officejet 4620 function

  I just installed my Officejet 4620.

  However, I can't print duplex function in the configuration of printing.  I understand that I have to manually turn the paper as my previous model 4500.  Someone knows the solution?

  I've referenced the manual of your printer. Possibility of manual 2-sided printing is not available with in the printer preferences.  (Where you go into the control panel and set the preferences for the printer from there) But the application your impression of like MS Word for example, you can go to file>print> look under settings and see if there is the option "Manually print on both sides" . Alternatively, you can check Excel and Adobe too. Here is the link for your printer manual http://h10032.www1.hp.com/ctg/Manual/c03251656.pdf

• OCR for Officejet 4620 on Mac OS x 10.9

  OfficeJet 4620 leaves me no scan without OCR software - who tell me how to do.  Mac OS X 10.9.  Help?

  Hello

  Download and install the software below, don't forget to tick the option of scanning HP during the installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-125737-1&cc=us&DLC=en&LC=en&OS=4159&product=5191646&sw_lang=

  Once the installation is complete, restart your Mac and launch software update, then go to Applications > Hewlett-Packard, open the HP utility and make sure that the Scan of the computer is turned on.

  Kind regards

  Shlomi

• No printing black ink for OfficeJet 6500 a Plus.

  My Officejet 6500 did this once before and everything started to work properly.  Now print all colors except black. I replaced the cartridge HP 920XL but does not always print. Printer indicates that the cartridge is not empty. Checked the troubleshooting but no problem with the cartridge or seats.  Through printer head cleaning. Tried to align the print heads, but failed. Does this mean I need to replace the print head?

  Hi sandraYPO,

  I understand that the black is not printing.

  Thank you for your response.
  I'll be happy to help you with this.

  I knew not what documents you have already tried.

  Here is a document for the printer does not print black ink or color ink or prints blank Pages.

  I have included a document for the 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the screen of the control panel. It will provide you with the instructions to manually remove and clean the print head.

  This URL is a message for soaking the print head that you can try.

  New black cartridge prints partially and light.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!

• Don't print any black ink - HP OfficeJet 4620 - FIXED!

  When I replaced the black cartridge with a black XL version, it would not print.  I went on this forum and saw that some had problems and were unable to solve.

  I ran printing HP and doctor Scan and after cleaning the heads, EUREKA!  It works now!

  Good luck!

  UPDATE: actually, it didn't work.  Some impressions later the printer started doing the same thing - fading out for nothing.  I ran the doctor print again and it didn't work.  Resumes the cartridge and replace it with another 564 HP cartridge and IT is WORKING now!

• installation of Windows 8 for officejet 4620. software available?

  The software available on the hp site does not install with windows 8. All solutions?

  This thread has been locked, for more information on HPPIW, please refer to the following support document:

  http://support.HP.com/us-en/document/c02681060

  HP printer Installation Wizard is an application of HP support that helped to download printer software. This support request is no longer supported by HP. This software was last updated was September 22, 2015.

  To download and install the latest version of the software for your HP printer, please visit 123.hp.comor HP support Web site, HP Support Assistant (in English).

• Problems with 920XL ink for Officejet 6500 a more printer

  I was very disappointed so far with 920XL ink. It is supposed to provide 2.5 x the ink, but since my printer use frequently will not be printed in black and I have to remove the cartridge, shake and replace to get the ink out. Someone else had this problem? I had no problem with the ordinary 920 black ink cartridge.

  HPnewbee Hey!

  You may have a bad cartridge. If you have recently purchased it, it may still be in warranty. You can call to see if you can get a replacement cartridge.

  I hope this helps!

• OfficeJet 4620: How to cut and copy on HP Officejet 4620

  I am trying to reduce a document to 60% and then copy it.  Because I can not find a guide for Officejet 4620, can someone please tell me how to do?

  Hello
  The printer front click on copy.
  Click the key button to access the setting of copy menu.
  Select reduce/enlarge, and then select custom, set it as 60% and press OK.
  Click the back button once, and then click Start, black or color copy.

  Kind regards
  Shlomi

• What does it mean when I get question marks in my ink level indicator for my lexmak 3600-4600 printer

  What does it mean when I get question marks in my ink level indicator for my lexmak 3600-4600 printer

  Hello

  Maybe you are low on ink

  Contact Lexmark technical support and are looking for a manual on the use of your printer and the error messages mean or asking for their support

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU

• How to show the ink levels on the computer for Officejet 6600

  How to show the ink levels on the computer for Officejet 6600

  What is the full product name or product number?

  is your printer?

  This is the Manual of your printer the following image was derived.

  You can use the printer's built-in web server to get the status of the printer information from a browser.

  

• Ink level report for OfficeJet 6500 a Plus

  HP watch control centre is no longer an option for me to check the levels of ink for my printer. How can I get the complete control center folder options?

  I understand that you are unable to check ink levels. I uninstall the printer and reinstall the drivers from the Hp website.

  Click here for the drivers.   Select the drivers and full software features.

  Let me know how it goes.

• My Officejet 4620 do not print black ink

  I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

  just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

  going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

  theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

  you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

  (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

  (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

  (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

  (4) press the scanner part and the upper part against the back wall.

  (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

  (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

  (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

  (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

  (9) now that all the screws are removed, take the Panel front and partially pop it back together.

  (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

  (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

  (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

  (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

  (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

  (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

  (16) continue to do this until the water is clear.

  (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

  (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

  (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

  (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

  now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

  p. s.

  You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

  Enjoy!  -Porf

• HP Officejet 4620: HP Officejet 4620 only ink red print documents computer

  Hello

  I'm connected wireless to my printer HP Officejet 4620. I use the XP operating system (I know very dated) I am trying to print Word documents and they are just an impression in red ink. When I try to run "Clean printhead" function black ink prints fine through the printer. Can someone help me or explain the reasons for which the documents are only printing red ink through my computer?

  Thank you for your time,

  Steph

  Hey @StephyB,

  Welcome to the Forums of HP Support!

  I understand that e-all-in-one Officejet 4620 prints in red when you print from Word on your Windows XP computer. I can help you with that.

  Probably what is happening is there is a font setting that has been changed in Word. If you are unable to find such a context, then the following can be done:

  1. Close any programs you have open.
  2. If the printer is connected via a USB cable, remove it.
  3. Click on start, control panel and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. Uninstall the drivers and the software associated with the printer.
  8. Download the latest drivers by clicking on this link.

  Please let me know if this allows you to print in black. If so, please click on accept solution. If you appreciate my help, please post it by clicking the thumbs up icon. The two icons are below this post.

• OfficeJet 4620: No black ink

  I have a HP Officejet 4620 ink empty simply stop working. I went through all the downloads, troubleshooting and called customer service. Told me the reason why my black ink wouldn't print was because I haven't used my printer enough, even if the day before it stop working, it works great. I was told that I have would switch to a new printer for the low price of $140 with a 3 year warranty. I've had my printer for 2 years and spent more than $120 for it. I think that spending that much on a printer, it would last 2 years? Maybe it's the lifecycle of HP printers? Im very disappointed with HP on this issue. I was told someone else contacted me and have not heard of anyone yet.

  I just got a phone call from HP and they told me they would me shipping a printer reconditioned to replace mine. I hope it works, thanks for the help