Problems with 920XL ink for Officejet 6500 a more printer

Similar Questions

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

• OfficeJet 6500 has more printing problems

  My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

  Can anyone help?

  N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

• No printing black ink for OfficeJet 6500 a Plus.

  My Officejet 6500 did this once before and everything started to work properly.  Now print all colors except black. I replaced the cartridge HP 920XL but does not always print. Printer indicates that the cartridge is not empty. Checked the troubleshooting but no problem with the cartridge or seats.  Through printer head cleaning. Tried to align the print heads, but failed. Does this mean I need to replace the print head?

  Hi sandraYPO,

  I understand that the black is not printing.

  Thank you for your response.
  I'll be happy to help you with this.

  I knew not what documents you have already tried.

  Here is a document for the printer does not print black ink or color ink or prints blank Pages.

  I have included a document for the 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the screen of the control panel. It will provide you with the instructions to manually remove and clean the print head.

  This URL is a message for soaking the print head that you can try.

  New black cartridge prints partially and light.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!

• 'communication with the computer problem', after you have reinstalled Officejet 6500 has more CN557A # product

  This printer has been installed and the work fine, then suddenly stop working. Uninstalled and reinstalled site directions by HP. Receive the message "There is a communication problem with your computer." Having checked the USB connections and the printer works fine wirelessly from my laptop. The printer appears as the default value on the computer connected USB port, running Windows 7 64 bit.

  pamvan,

  I'm glad to hear that you are back running. Please let us know as soon as POSSIBLE if you have questions .

• OfficeJet 6500 has MORE printing problem

  Y at - it a setting to load the paper? My print jobs is now too high on paper. I have recently updated my computer to Windows 8.1 but I do not know if this concern began before after I've changed computers. I printed the page diagnosis and the letters are about 1/3 cut top

  Welcome to the mike325 forums

  I saw your post on your Officejet 6500 more model cut your impressions. I suggest an alignment running on the printer to see if that helps. You can also run the HP print and Scan Doctor to solve printing problems and that the tool can help to clear up the problem.

  To help alignment, click here and scroll down until "step 5: align the print head": align print head

  I hope that these steps to do the trick, please let me know the results!

  Have a wonderful Thursday

• OfficeJet 6500 has more: printer will not use BLACK ink to print in BLACK. Mix of colors rather than use BLACK.

  Printer prints BLACK ink BLACK, instead he mixes the colours to make BLACK.  It creates copies in BLACK only, without mixing colors to achieve the BLACK, but when I ask it to print something it automatically uses the ink color.

  In properties, advanced, I checked the box to print in BLACK only, but did not help.

  In the printing preferences, shortcuts, where it says printing in grayscale, do you feel black ink only as a default?

  I don't know if it will work, I do not use this parameter or the Advanced setting, I have been using high-quality grayscale, but I'm interested to know why, also, when I print 99.9% of the time with color, what I need to change the color ink cartridges so frequently.  You say the color of those who are used to make black.  That makes no sense to me either why the printer would do that, except high-quality grayscale means he uses color inks vs only Black Ink is not.

  Test printed with two parameters, and that is exactly the same, so I won't set my default preferences for levels of gray-black ink only printing and see what happens.

  What how can you tell whether or not the printer is mix colors?  (by the way, if you use unusually fast color ink)

• Re connecting my HP Officejet 6500 has more print

  my printer has stopped working.  I disconnected everything... reloaded - shows in my devices, but still is not printing

  Hi Karen,.

  Please answer these questions to better understand the issue.

  1. do you have that you have installed the latest drivers of printer that is compatible with Windows 7?

  2. you are trying to connect the printer via a wired or wireless?

  3. do you get an error message?

  You can follow the steps in troubleshooting of this article. This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also the suggestion of this link to HP support:

  Printer HP Installation troubleshooting

  http://WWW8.HP.com/UK/en/support-topics/printer-installation/printer-troubleshooting.html

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Software full feature driver for officejet 6500 has more of OS Windows7

  I can't use my laptop with a wireless router. Please tell me how to uninstall it and where can I get the recommended driver software.

  Here is the full link driver recommended for Windows 7 64-bit: HP Officejet full feature and driver software

  Good luck!

  -SeanS

• Re: Officejet 6500 has more - printer goes to sleep, wakes.

  Hello

  Location: HP Officejet6500A more - new iMac 27 "with Mac OS X 10.7 (Lion) - new driver installed OK HP - printer is connected via USB and I turned off the power on the printer wireless.

  After that full power on the work of the printer scans well, work, fax work - but what printer goes to sleep "indicated by the power LED flashes slow" I can't wake him again when sending a new print job - I need to do a full power off/on power by removing the power cable.

  When the printer is "asleep" utility printer HP cannot connect until I do a power full printer deactivation / activation.

  While the printer is in standby, pressing the flashing slow power switch / light has no effect to wake up the printer, only a full power/turn off works.

  I could not find info on the led slow blinking power manual?

  Any thoughts?

  Thank you

  Tony

  Hello

  Thanks for the post.  With this one, I recommend following the steps listed in the link below.  Make sure you are plugged directly into a wall outlet, not a power strip or conditioner.  Good luck!

  http://support.HP.com/us-en/document/c01321436

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• OfficeJet 6500 has more

  I have an officejet 6500 a more printer connected to my desktop, I had some problems with the printer where it would print wireless, but VERY slowly while it print fast when connected by usb (I still havnt solved this problem).  I decided to try to fix on my desktop and share it on the working group.  It worked perfectly for all my computers, with one exception, I have installed the 64-bit driver and now I can not install the 32-bit driver to share on the network.  Can anyone tell me please where to find the uncompressed 32-bit driver.

  Hello

  could you provide the community with a bit more information to help narrow troubleshooting? This is for windows? If so what version?

• HP Officejet 6500 has more EZ710nz

  I have a HP Officejet 6500 a more printer connected via the connecting cable from printer to my new laptop, in Windows 7 Home Premium.  This printer takes very, very long to "warm up" (2-3 minutes) and, in doing so, made a lot of noise. The sounds of noise like something spinning and moving inside and is pretty loud.

  I checked all the ink cartridges, etc., and everything works fine and seems to be in order.  Does anyone know if this LONG heating period and the NOISE that accompanies it is normal?

  The noise is normal and is the maintenance printer printheads to ensure that they will not be blocked when printing. See here for more information.

  To minimise this, do not remove the power of the printer, it should be plugged into a live outlet.  You can leave the printer turned on (it will automatically enter a low-power state when the don't print not) or turn off the power button on the printer.

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!