Insert a floppy disk in the drive...

Similar Questions

• Nothing happens when I insert a San disk in the drive

  Original title: JONANDERSON_703
  When I insert the San disk in the drive, nothing happens.

  Hi JOHNANDERSON_703,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like your San drive is not getting recognized in Windows Vista.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2 is the issue limited only when connecting San drive?

  3 is the another USB device works fine?

  4. do you get any error message or connection error code car san?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  My drive does not appear in Windows Explorer: http://support.microsoft.com/kb/330140

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• T8000 not start: insert the floppy disk into the drive system

  I hope someone can help me with the problem on my T8000 (W2K)
  From one day to the other, I was not able to start start of the system. Immediately, it comes with the message:
  Insert system disk in drive
  Press any key when ready

  I have replaced twice the HD, but it did not help.

  Could someone help me with this problem?

  Thank you and best regards,

  rjanagac

  Hi Rodrigo

  It of not easy to say why unit you can t boot. It will be interesting to know more details. Have you tried to make a few changes in the BIOS boot priority? Located just (rider) settings on the HARD drive to master or slave?
  Have you tried reinstalling your operating system with recovery CD/DVDs?

  Good bye

• What does this message and how I can fix? "There is no disk in the drive. Please insert

  What does this message and how I can fix? Thank you.

  "There is no disk in the drive. Please insert the floppy into \Device\Harddisk2\Dr2.

  Hiking Abes

  Important information... what version of Premiere Elements you are using and on what computer operating system is running.

  If your question is really tied to SmartSound installation, then...

  It considerations important installation first elements 11 Smartsound

  http://helpx.Adobe.com/premiere-elements/KB/installing-SmartSound.html

  It when you enter the program

  http://www.SmartSound.com/support/link.php?ID=308

  I do not see these links included in John T. Smith link towards a solution, so I am supplementing with the foregoing.

  Please let us know the result.

  RTA

• Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K

  Winlogon.exe guard popping up saying 'No disc' there is no disk in the drive. Insert a disc into drive K. I won't record anything. It keeps popping up when I want to stop and he let me close. And it won't go away. I tried the Task Manager, and who is unable to complete the task. I went to his file and tried to delete, but it's not going to get out me of my PC

  Hello

  1. what version of operating system you are using?
  2. did you of recent changes on your system prior to this problem?
  3. when, exactly, you get this error message?

  You can try the steps mentioned below and check if it helps to solve the problem.

  Method 1: Scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Method 3: If the problem does not exist in Mode without failure, then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

  Hi all!

  When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

  attachment: -.

  http://i51.Tinypic.com/6zoaoo.gif

  or

  

  Please help me as soon as possible!

  Thank you very much!

  Post in the forums of users AVG.

• Repeat the mistake of Photoscreensaver.scr: "there is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I've looked everywhere to find a solution to this problem, but it will not go away.  the message I get is

  "There is no disk in the drive. Insert a disc into drive \Device\Harddisk4\DR4.

  I have only one hard drive installed, my C drive with a partition D of the spirit of the original plant. I would be very grateful is some has a fix for this!

  Hello

  This can happen if you have conencted some disk of the machine that has pictures and you have set up the photos in the screen saver.

  You can try to change the photo screensaver can access the registry path if it exists.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_CURRENT_USER\Software\Microsoft\Windows Gallery\Slideshow\Screensaver photo

  c. If the screen saver is mentioned in the settings, then on the right you will see "FolderPath".

  (d) the entry for folderpath should be C:\Users\Public\Pictures\Sample pictures

  e. If isn't changing for the above entry.

  f. exit the registry editor, restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• IType.exe - no disk in the drive. Insert the disk in drive D:

  I have a message that says "itype.exe - no disk in the drive.  Insert the disk in drive D:"I do not know how to delete or correct this problem... help, please.  Thank you!!!

  Hi LauraCzarnecki,

  1. when exactly you get this message?

  2. did you of recent changes on the computer?

  IType.exe is a process belonging to the Microsoft Intellitype keyboard software. This can probably occur due to corruption in the registry for the key intellitype.

  If you have any IntelliPoint or IntelliType software on the system installation, then try uninstalling and reinstalling.

  For more information, please visit the following links:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://www.Microsoft.com/hardware/downloads/default.mspx

  Hope this information is useful.

• Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

  1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

  2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

  Hi frankb911,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

  I hope this helps!

• There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

  I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

  Hello

  ·         Were there recent changes made on the computer before the show?

   

  This problem occurs when all the following conditions are true:

  (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

  (b) you don't have a removable disk in the removable disk drive.

   

  Method 1:

   

  Change the assignment of drive letter for the removable a drive letter other than C:\.

   

  a. log in the computer as an administrator.

  b. Insert a disk in the removable drive.

  c. type computer management in the start search box and press ENTER.

  d. click on disk management.

  e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

  f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

   

   

  Method 2:

   

  I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

   

  Method 3:

  You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

  (a) click Start and then click Control Panel.

  (b) click on system and Maintenance link.

  (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

  In Device Manager, go then, mouse or other pointing devices.

  Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

  I hope this helps.

• Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I have Windows 7 Professional in my office. I get this error permanently on my PC.

  "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".

  I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

  I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

• Error: "regsvr.exe - no disk there is no disk in the drive." Insert a disk into drive\Device\Harddisk1\DR1 "_".

  Original title: regsvr.exe - disc no.

  Hello

  I get an error message whenever I insert my pen drive or memory card in my laptop. The error message is "regsvr.exe - no disk there is no disk in the drive." Insert a disk in the drive\Device\Harddisk1\DR1. There are only three options - Cancel, Try Again and continue. None of them works. I have to manually stop the system to get rid of it. Please help me get rid of this error message for always. Your response to this regard will be highly appreciated. Cordially Sashwat

  Hello, Sashwat

  If possible, test the drive in another computer and check if you are able to access or not. If this is not the case, the drive may be bad.

  If it's a USB card with an SD card reader, rather than a dedicated, flash drive check if the card is recognized and accessible in other drives/devices. Also, check the metal contacts on the card to make sure that nothing is blocking the metal contacts. If the card cannot be read in other devices and contacts are clean, the card is likely bad.
  If other devices can access the drive, but not by the card reader, the card reader could be bad.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you use a blank CD in the CD drive and try to open it to put the files, it is written "Please insert a disk in the drive."

  Original title: windows 7

  CD drive reads CD when there is something on it but not read a blank CD. When I put a blank CD in the CD drive and try to open it to put the files it contains, it says please insert a disk in the drive.

  Movido al foro EN - U.S. / /.

  Hi Robert,.

  Thanks for the screenshot of your system information.

  As you can see in the screenshot, on the right side, the Description indicates that this is a CD-ROM drive, it means that it's a player-CD (Read Only Memory) which can only read the discs, but cannot write data to the disk. You may need to replace it with a CD/DVD burner drive for read/write drives.

  Hope this information is useful. If you have any additional questions on the issue, please post back, we will be happy to help you.

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• First 13 items there is no disk in the drive. Please insert a disc

  I installed the box of the first 13 and 13 Photoshop elements on a brand new Dell with Windows 7 computer.  Everything is going well except for a pop-up message in the elements of Prime Minister, "there is no disk in the drive. Please insert the disc... ». I have read several messages from people encounter the same problem and I tried all the suggestions that were provided: restarting, uninstalling, reinstalling. I disabled the firewall and Virus when I did reinstall it by copying the file from the disk to my office and execution from there. I can't believe that there is no support for this problem. If anyone has a real solution, please let me know. The Photoshop works fine, so the problem is related to items only. I'm ready to throw in the towel and just get my money back.

  vh0thu

  In light of no one size fits all for the drive no problem, we try to find out what happens to work for you.

  I have a lot of variety to explore, but the most promising so far is that of PRE_help involving the OldFilm.AEX in this any disc.

  Have you read newly installed does not first element 13

  PRE_help wrote in this thread

  Could you try to remove the old Film of the first elements 13 installation location, and then try to launch the application? The right to be removed file is (assuming that you installed in the default location)

  Program Adobe Premiere elements 13\Plug-Ins\Common\NewBlue\OldFilm.AEX

  While we're not 100% certain that it is to blame, we have seen that this solves the problem in some cases internally. Let us know if that helps.

  Kind regards

  Team first Elements

  1. do you have a slot for SD built into your computer? If so, do you have anything in this niche right now? If not, put to the test to white comes with the computer in the SD card slot and watch the results on any drive.

  2. are you all messages regarding no disc in a named player, you feel you've ever had? If so, consider anyway management computer/manage/disk to verify that there are no named TAPI driver here. If found, we could consider giving the reader a different drive letter.

  3. do you make the scenario - uninstall, free ccleaner cross, reinstall it with antivirus and firewall disabled?

  4. have you deleted the Adobe Premiere elements Prefs file, and, if it does not, then you deleted the whole 13.0 folder in which the Adobe Premiere elements Prefs file exists?

  5. with this particular problem and you cancel your way out there?

  To what extent are you within 30 days the purchase?

  Please review and consider. Looking forward to your results.

  RTA